17.05.

2018 Die Science: Developing forming dies - Part I - The Fabricator

(https://ads.thefabricator.com/delivery/ck.php?
oaparams=2__bannerid=210__zoneid=1__cb=69b84f60f5__oadest=https%3A%2F%2Fptop.only.wip.la%3A443%2Fhttp%2Fwww.primapower.com)

Home (/) / Article (/?filter=article) / Stamping (/?filter=article&category=stamping) / Die Science: Developing forming dies - Part I

y%2C+as+well+as+a+good+understanding+of+all+tooling+factors+to+make+complex+geometries.&img=https://static.thefabricator.com/a/developing-

Die Science: Developing forming dies - Part I

Steps 1 and 2
STAMPING JOURNAL APRIL 2007 (/PUBLICATION/SJ/APRIL-2007)
APRIL 10, 2007
BY: ART HEDRICK (/AUTHOR/ART-HEDRICK)

Determining the best die geometry to produce multicontoured formed parts can be difficult. A full understanding of
the drawing and stretching process is necessary, as well as a good understanding of all tooling factors to make
complex geometries.
Editor's Note: This is first installment of a three-part series that discusses die
development for producing nonuniform, contoured parts by breaking the process
down into eight steps. Part I covers the part material, its form, and its function.
Part II discusses length-of-line analysis and tip angle. Part III discusses unfolding
the part, blank holder shape, addendum features, and virtual die tryout.

Determining the best die geometry to produce multicontoured formed parts can
be difficult. Developing die geometry for a formed part with simple axial symmetry
is easy compared with die geometry for a nonuniform contoured part.

Examples of difficult part geometries are automotive underbodies, contoured

body panels, oil pans, and frame rails. Most tall contoured parts require an
abundance of stretch and flow to obtain the part geometry. A full understanding of
the drawing and stretching process is necessary to produce these parts. In (https://static.thefabricator.com/a/developing-forming-dies-part-i-
addition, it's important that the process engineer has a good understanding of all 0.jpg?size=1000x1000)
tooling factors required to make such complex geometries.

Finite Element Analysis

Most tool and die shops produce difficult contoured part shapes with a forming simulation, such as finite element analysis (FEA). FEA provides
some of the necessary data necessary to make die geometry changes.

ADVERTISEMENT

(https://ads.thefabricator.com/delivery/ck.php?
oaparams=2__bannerid=123__zoneid=217__cb=28b3a463b1__oadest=https%3A%2F%2Fptop.only.wip.la%3A443%2Fhttp%2Fwww.cpec.com)

However, keep in mind that FEA provides results for only the process and geometry that were programmed into it. Forming simulation software
does not design the die for you; it only provides the results of what you have already designed. It's up to the process engineer and die designer to
determine the starting die geometry. Once this geometry is established, it now can be tested using FEA.

I will take you step by step through the development process. However, each step does not have to take place in the order shown.

Step 1: Determine Part Metal Type, Grade, and Thickness

A die can't be designed effectively without this critical data. I have been in situations where my client asked me how to make a part but the only
data he could give me was that it was made of steel.

What kind of steel? How thick is it? His answer? "We'll figure that out later. Right now I just want to know if it can be made." I told him I couldn't
make a decision without more data on the steel. Thousands of material types are being stamped today, and understanding your metal's behavior
when it's stretched and drawn is critical for success.

Some metals require annealing after forming, while others may be formed multiple times without annealing. Many metals stretch well, while others
stretch very little. Some metals are hard and abrasive, and others are soft and ductile. Various metal types exhibit a lot of springback, while others
have very little. And some metals may not be able to take a certain shape in a conventional stamping process, so they may require a different
process, such as casting or forging.

https://www.thefabricator.com/article/stamping/developing-forming-dies-part-i 1/6
17.05.2018 Die Science: Developing forming dies - Part I - The Fabricator
Each metal has its own behavior, and the die geometry should be created with respect to this behavior. If you don't know the metal type or
behavior, find out before you attempt to develop a die geometry and process. Basic data you need to know are metal type, thickness, elongation,
chemistry, and hardness.

Most of this data can be found in a metallurgical handbook or online. Also, keep in mind that the metal being formed also is going to affect your
judgment with respect to the tool steel or die materials necessary to form the part. Don't attempt to develop a die without this data. Figure 1 shows
a variety of materials formed into difficult contoured geometries. Each metal can affect the die geometry.

Step 2: Study the Part

Take the time to fully analyze a part's shape to understand its function. If the part is a section of a larger assembly, analyze how it attaches. Look
for areas that can be changed to make it easier to manufacture but won't affect its function.

In the automotive industry, the sooner you can present a product concession, the better chance you have of getting that particular product change.
As time goes by, you'll find that getting an engineering change is comparable to passing an act of Congress. This is because most of the
performance data already has been collected and passed. Key tests, such as a crash test, may require repeating if a part is altered.

Work with your customer on the process. If the customer has made similar parts in the past, it may be able to assist you with creating the die
geometry and process. This collaboration can save time, frustration, and money.

Tolerances. Small differences in tolerance will affect the blank size, number of operations needed, and the die geometry. For example, for a 15-
inch by 17-in., noncritical contoured part, the general form tolerance is ±2 mm (profile of surface) and tolerance on the trim line is ±4 mm. A great
deal of tolerance, depending on part geometry, may allow you to produce the part from a fully developed blank.

In other words, the starting blank's profile will represent the finished part profile. However, if the tolerance is reduced to ±0.5 mm and the trim
tolerance to ±1 mm, the part must be trimmed after drawing and most likely will require a second form die to achieve the necessary tolerances.

Flatness. Part flatness is one of the most difficult geometric features to obtain in a conventional stamping process. Other tolerances to consider
are parallelism, cylindricity, concentricity, angularity, straightness, and perpendicularity. Also look for items such as burr direction and burnish or
shear lengths.

In the next issue we will continue examining tolerances and how they affect the forming process. In later issues I'll address the development of
items such as binder shapes, addendum, and blanks. Length of line analysis, draw bead and bar placement, and many other elements also will be
discussed.

Until next time ... Best of luck!

You May Also Like

(/article/stamping/developing-forming-dies-part-ii) (/article/stamping/developing-forming-dies-part-iii)
Die Science: Developing forming dies - Part II Die Science: Developing forming dies - Part III

(/article/stamping/developing-forming-dies-part-ii) (/article/stamping/developing-forming-dies-part-iii)

(/article/stamping/using-forming-assessment-tools-to-make-wise-die- (/article/stamping/rising-expectations-spark-new-approach-to-draw-die-
buying-decisions) development--reconciling-demands-for-increased-quality-at-lower-
costs)
Using forming assessment tools to make wise die-buying decisions
Rising expectations spark new approach to draw die development:
(/article/stamping/using-forming-assessment-tools-to-make-wise-die-
Reconciling demands for increased quality at lower costs
buying-decisions)
(/article/stamping/rising-expectations-spark-new-approach-to-draw-die-
development--reconciling-demands-for-increased-quality-at-lower-
costs)

Art Hedrick
Contributing Writer
Dieology LLC
8730 10 Mile Rd. SE.
Rockford, MI 49341
Phone: 616-894-6855

https://www.thefabricator.com/article/stamping/developing-forming-dies-part-i 2/6
17.05.2018 Die Science: Developing forming dies - Part I - The Fabricator

http://www.dieology.com (http://www.dieology.com)
Contact via email (mailto:[email protected])

More Content by Art Hedrick (/author/art-hedrick)

Author of the "Die Science" column in STAMPING Journal®, Art also has written technical articles on stamping die design and build for a number of
trade publications. A recipient of many training awards, he is active in metal stamping training and consulting worldwide.

Published In...

STAMPING Journal
STAMPING Journal is the only industrial publication dedicated solely to serving the needs of the metal
stamping market.

Preview the Digital Edition (http://www.stampingjournal-digital.com)

Subscribe to STAMPING Journal (/subscription/pub/sj)

Read more from this issue (/publication/sj/april-2007)

(https://www.twitter.com/stampingjournal)


Related Companies
Dieology LLC (https://www.thefabricator.com/directory/showroom/dieology-llc)

0 Comments The Fabricator 

1 Login

Sort by Best
 Recommend ⤤ Share

Start the discussion…

LOG IN WITH
OR SIGN UP WITH DISQUS ?

Name

Be the first to comment.

ALSO ON THE FABRICATOR

Still Building America—Spreading the message about the Fabricating machine combines plasma cutting, oxyfuel
welding trade cutting, marking, drilling
1 comment • 5 months ago 1 comment • 5 months ago
Tiffany Noel Orff — Love this! Simpal Simon — hello there am simon from kenya..i'm
Avatar Avatarexperiencing a problem with my CNC Plasma cutter..the homing
system is like its centrally …

Wolfram’s Triconstant back-cast resistance welding Should your operation convert from spot welding to laser
electrodes optimize current transfer keyhole welding?
1 comment • a month ago 1 comment • 3 months ago
Bernie Wire — Do you have data illustrating to what extended BrandonABoyer — What about safety concerns? Laser welding
Avatarservice life, better performance, Improved reproducible spot Avataroperations need to take place in an enclosed space to prevent
welding quality can be expected … ocular damage.Also I …

✉ Subscribe d Add Disqus to your siteAdd DisqusAdd 🔒 Privacy

SITE SPONSOR

https://www.thefabricator.com/article/stamping/developing-forming-dies-part-i 3/6
17.05.2018 Die Science: Developing forming dies - Part I - The Fabricator

(https://ads.thefabricator.com/delivery/ck.php?

oaparams=2__bannerid=525__zoneid=473__cb=82dc0675dd__oadest=https%3A%2F%2Fptop.only.wip.la%3A443%2Fhttp%2Fwww.cpec.com)

(https://ads.thefabricator.com/delivery/ck.php?

oaparams=2__bannerid=55__zoneid=218__cb=8f2ac6f94c__oadest=https%3A%2F%2Fptop.only.wip.la%3A443%2Fhttp%2Fwww.greenerd.com%2F)

Upcoming Industry Events

ALAW® – Advanced Laser Applications
Workshop (/event/alaw-advanced-laser-
applications-workshop-1)
JUNE 4-6, 2018 | PLYMOUTH, MI
FABTECH Canada (/event/fabtech-canada)
JUNE 12-14, 2018 | TORONTO, ON
Atlantic Design & Manufacturing
(/event/atlantic-design-manufacturing)
JUNE 12-14, 2018 | NEW YORK, NY
International ThermProcess Summit (ITPS)
and the International Finishing & Coatings
Summit (IFCS) (/event/international-
thermprocess-summit-itps-and-the-
international-finishing-coatings-summit-ifcs-)
JULY 30 - AUGUST 1, 2018 | ATLANTA, GA
International Robot Safety Conference
(/event/international-robot-safety-conference)
OCTOBER 9-11, 2018 | DETROIT, MI
Northeast Lean Conference 2018
(/event/northeast-lean-conference-2018)
OCTOBER 10-11, 2018 | PROVIDENCE, RI
EuroBLECH 2018 (/event/euroblech-2018)
OCTOBER 23-26, 2018 | HANOVER, DEU
FABTECH (/event/fabtech-1)
NOVEMBER 6-8, 2018 | ATLANTA, GA
Powder Coating 2019 Technical Conference
(/event/powder-coating-2019-technical-
conference)
APRIL 1 - 4, 2019 | ORLANDO, FL

See All Industry Events » (/?filter=event)

(https://ads.thefabricator.com/delivery/ck.php?

oaparams=2__bannerid=1099__zoneid=220__cb=fbdbc9042d__oadest=https%3A%2F%2Fptop.only.wip.la%3A443%2Fhttp%2Fwww.diedesignsoftware.com%2Fproducts%2Flogopress3-
3d-die-design)

Most Popular Content This Week

A wireless foot pedal and a spud wrench
(/blog/a-wireless-foot-pedal-and-a-spud-
wrench)

https://www.thefabricator.com/article/stamping/developing-forming-dies-part-i 4/6
17.05.2018 Die Science: Developing forming dies - Part I - The Fabricator
Meridian Magnesium fire spotlights supply
disruption vulnerability (/blog/meridian-
magnesium-fire-spotlights-supply-disruption-
vulnerability)
Tips for successful robotic aluminum welding
(/article/automationrobotics/tips-for-
successful-robotic-aluminum-welding)
Huntington Ingalls Industries partners with 3D
Systems to accelerate adoption of 3-D
printing (/news/additive/huntington-ingalls-
industries-partners-with-3d-systems-to-
accelerate-adoption-of-3-d-printing)
Tips for preparing your material before
welding (/article/cuttingweldprep/tips-for-
preparing-your-material-before-welding)
NBT announces 2018 manufacturing camp
grant recipients
(/news/shopmanagement/nbt-announces-
2018-manufacturing-camp-grant-recipients)
Nucor to build galvanizing line at Arkansas
sheet mill (/news/metalsmaterials/nucor-to-
build-galvanizing-line-at-arkansas-sheet-mill)
Big River Steel CEO attends White House
summit on artificial intelligence
(/news/metalsmaterials/big-river-steel-ceo-
attends-white-house-summit-on-artificial-
intelligence)
Piab’s Flexible Suction Cup Mount comprises
interchangeable parts for customization
(/product/materialshandling/piab-s-flexible-
suction-cup-mount-comprises-
interchangeable-parts-for-customization)
Fronius’ TransSteel 2200 inverter power
source welds aluminum, copper silicon alloys
(/product/arcwelding/fronius-transsteel-2200-
inverter-power-source-welds-aluminum-
copper-silicon-alloys)

Visit our Affiliated Websites

(https://www.fmanet.org)

(https://www.canadianmetalworking.com) Membership (https://www.fmanet.org/membership)

Features (https://www.canadianmetalworking.com/features/) Training (https://www.fmanet.org/training)
Blogs (https://www.canadianmetalworking.com/blogs/) News (https://www.fmanet.org/blog)
News (https://www.canadianmetalworking.com/news/) Events (https://www.fmanet.org/events)
New Products (https://www.canadianmetalworking.com/products/)

(https://www.fabtechexpo.com)

FABTECH News (https://www.fabtechexpo.com/blog)

Attend (https://www.fabtechexpo.com/attend)
Exhibit (https://www.fabtechexpo.com/exhibit)
Education Program (https://www.fabtechexpo.com/learn)

(https://www.nutsandboltsfoundation.org)

Scholarships (https://www.nutsandboltsfoundation.org/scholarships)
Manufacturing Camps
(https://www.nutsandboltsfoundation.org/camps)
News (https://www.nutsandboltsfoundation.org/news)
Donate (https://www.nutsandboltsfoundation.org/donate)

Subscriptions (/subscription)

https://www.thefabricator.com/article/stamping/developing-forming-dies-part-i 5/6
17.05.2018 Die Science: Developing forming dies - Part I - The Fabricator

Advertise with Us (/mediakit)

Contact Us (/contact-us)

En Español (/espanol)

Industry Tradeshows (/?filter=event)

FMA Store (https://www.fmanet.org/store)

Job Board (https://jobs.fmanet.org)

TheFabricator.com provides metal fabrication professionals with market news, the industry's best articles, product news, and conference information from the
Fabricators & Manufacturers Association, Intl. (https://www.fmanet.org)

(/publication/fab) (/publication/sj) (/publication/pwt) (/publication/tpj)

(/pwtv) (/tpjtv)

© 2018 FMA Communications, Inc. All rights reserved.

2135 Point Blvd., Elgin, IL 60123 | 815-399-8700 | [email protected]

(mailto:[email protected])

Terms of Use (https://www.fmanet.org/terms-of-use) | Privacy Policy (https://www.fmanet.org/privacy-

policy)

https://www.thefabricator.com/article/stamping/developing-forming-dies-part-i 6/6