Scribd
Upload
88 views

Wpbf4054Imnep Pibiflex 4054 Im Nero: Technical Data Sheet

This technical data sheet provides information on PIBIFLEX 4054 IM NERO, a black copolyester thermoplastic elastomer intended for injection molding applications. The document lists typical physical, mechanical, thermal, and processing properties of the material, along with storage and testing method information. Applications include parts for the automotive underhood area such as CVJ boots and adapters.

Uploaded by

ankit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
88 views

Wpbf4054Imnep Pibiflex 4054 Im Nero: Technical Data Sheet

This technical data sheet provides information on PIBIFLEX 4054 IM NERO, a black copolyester thermoplastic elastomer intended for injection molding applications. The document lists typical physical, mechanical, thermal, and processing properties of the material, along with storage and testing method information. Applications include parts for the automotive underhood area such as CVJ boots and adapters.

Uploaded by

ankit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA SHEET

PIBIFLEX 4054 IM NERO


WPBF4054IMNEP

Copolyester Thermoplastic Elastomer (TPC-ET)

Description Copolyester thermoplastic elastomer, standard injection moulding grade


Color Black
Markets Automotive
Applications Underhood: CVJ boots adaptor
Norm compliance Compliant with Regulation (EC) No 1907/2006 (REACh)
Processing technology Injection moulding

Physical properties Typical value (SI) Typical value (EN) Test method
Fatigue resistance 0.1/300 kcycles 0.1/300 kcycles ASTM D1052

Melt Flow Index 230°C/2,16kg 10 g/10min 10 g/10min ASTM D1238

Density 1.14 g/cm³ 1.14 g/cm³ ASTM D792

Hardness Shore D, 15s 41 41 ASTM D2240

Water absorption (24 h/23°C) 0.6 % 0.6 % ASTM D570

Mechanical properties Typical value (SI) Typical value (EN) Test method
Tensile strength at break 33 MPa 4785 psi ASTM D638

Tear strength 98 kN/m 559.825 lb/in ASTM D624-C

Tensile elongation at break 600 % 600 % ASTM D638

Flexural Modulus 90 MPa 13050 psi ASTM D790

IZOD impact strength, notched (-30 °C) NB J/m NB ft·lb/inch ASTM D256

IZOD impact strength, notched (23 °C) NB J/m NB ft·lb/inch ASTM D256

Thermal properties Typical value (SI) Typical value (EN) Test method
Melting temperature 200 °C 392 F° ASTM D3418

Vicat A (120°C/h at 10 N) 155 °C 311 F° ASTM D1525

Flammability Typical value (SI) Typical value (EN) Test method


Oxygen Index (LOI) 20 % 20 % ASTM D2863

Last update: 30/07/2015 SO.F.TER. GROUP Page: 1 of 2


TECHNICAL DATA SHEET

Processing conditions Typical value (SI) Typical value (EN)


Drying 3h/110 °C 3h/230 °F

Injection moulding Typical value (SI) Typical value (EN)


Recommended processing temperatures:

1st Zone 180 °C 356 °F

2nd Zone 210 °C 410 °F

3rd Zone 220 °C 428 °F

Mould 40-60 °C 104-140 °F

Storage
This product should be stored in a covered facility and kept away from moisture and heat.
Disclaimer
The figures reported in this Technical Data Sheet are based on tests and analyses carried out in SO.F.TER. laboratories on
injection-moulded specimens. These figures indicate the typical material properties and are not to be considered a
specification.The user shall always carry out his own tests and analyses in order to verify the suitability of the material for the
specific application.Test carried out at 23°C unless otherwise stated.
For technical or commercial information:
EUROPE
SO.F.TER. SPA, Via Mastro Giorgio 1, 47122 Forlì, Italy, tel +39 0543 790411
[email protected]

USA
SO.F.TER. USA, 400 Innovative Way, Lebanon, TN 37090, US, tel +1 844 657 6383 (THINKSOFTER)
[email protected]

BRAZIL
SO.F.TER. BRASIL, Av. Edgar Hoffmeister, 275, CEP 93700-000, Campo Bom, RS, Brazil , tel +55 51 2123 2610
[email protected]

MEXICO
SO.F.TER MEXICO, Circuito Mexiamora Norte 345, Puerto Interior, Silao, G.to , Mexico 36275, tel +52 472 722 6923
[email protected]

www.softergroup.com

Last update: 30/07/2015 SO.F.TER. GROUP Page: 2 of 2

You might also like