0% found this document useful (0 votes)
361 views

Frame 6B Pre-Owned Equipment List

This document provides equipment details for a Frame 6B gas turbine. It includes specifications for the gas turbine such as the manufacturer, model, power output, operating hours, and temperature ratings. It also lists details for related equipment like the main gearbox, starting engine, lube oil pumps, and other auxiliary systems.

Uploaded by

shiva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
361 views

Frame 6B Pre-Owned Equipment List

This document provides equipment details for a Frame 6B gas turbine. It includes specifications for the gas turbine such as the manufacturer, model, power output, operating hours, and temperature ratings. It also lists details for related equipment like the main gearbox, starting engine, lube oil pumps, and other auxiliary systems.

Uploaded by

shiva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

fR

Frame 6B pre-owned
Equipment list
FRAME 6B GAS TURBINE

Gas Turbine is a General Electric MS 6541B (Frame 6B), manufactured in Italy by Nuovo
Pignone.
Gas Turbine
[--] General Electric
Manufacturer
(Nuovo Pignone)
Model [--] MS 6541B (Frame 6B) with
Extendor upgrade kit
Serial [--] 0296528
1st synchronizing [--] Aug 1994
Operating Fire Hours [--] 110538 at 01/05/2010
Fuel
- main [--] Natural gas
- backup [--] Diesel oil (never run)
Power @ base load, ISO conditions [MWe] 39,340 (gas)
37,520 (oil – never run)
Heat rate @ base load, ISO conditions [kJ/kWh] 11,460 (gas)
11,570 (oil – never run)
Speed [rpm] 5100
Control system [--] Speedtronic MarkV
(was MarkIV, upgraded in
2000)
Design temperature
inlet air [°C] 15
exhaust air [°C] 540 ÷ 550 after installation
of the Extendor kit
(was originally 515°C)
[--] Air-type for stator
Cooling system
Water type for legs
[--] electric motor + torque
Starting device
converter
Mounting [--] Skid base
Compressor section details:

Compressor
Type [--] Axial
Number of stages [--] 17
Inlet flange [--] horizontal
Nominal Speed [rpm] 5100
Inlet guide vanes [--] Regulating I.G.V.

Combustion section details:

Combustors
Number of combustion chamber [--] 10
Number of spark-plugs [--] 2, electrode type
Flame detectors (number, type) [--] 4, UV type
Conventional / DLN [--] Conventional
NOx reduction system
type [--] steam injection
flow rate [t/h] 9
pressure [bar] 23,5
temperature [°C] 298 ÷ 320°C
Dual fuel (never run with
Fuel [--]
diesel oil)

Turbine section details:

Turbine
Number of stages [--] 3
Nominal speed [rpm] 5100
MAIN GEARBOX

Gearbox
Manufacturer [--] Flender-Graffenstaden
Model [--] TRL 65 CV
Speeds [rpm] in 5100 ; out 3000
Cooling [--] Oil
Gearbox gears, during 2007 inspection
STARTING SECTION

About 700 starting performed during operation.

Starting engine
Motor type [--] Electric
Manufacturer [--] GEC ALSTHOM
Model [--] AKG 400 L18
Serial [--] 54EN14258
Rotor type [--] cage
Speeds [rpm] 3000
Cooling [--] Self air-cooled
Electric motor
rated power [kW] 530
voltage level [V] 6000
phases; poles; frequency [ph; n; Hz] 3; 2; 50
nominal current [A] 58,5
starting current / nominal current [--] 5,7
Heaters (voltage, power) [V ; W] 220 ; 300
Auxiliary Reduction Gearbox
LUBE OIL ELECTRICAL PUMPS

Lube oil pump (auxiliary)


Manufacturer [--] ARIS CHIAPPA
Model [--] CVTG 80-250
Year [--] 1993
Number of units [--] 1 x 100%
Electric motor
Model [--] AP 225 M2
Rated power [kW] n/a
voltage level [V] 380

Lube oil pump (emergency)


Manufacturer [--] ARIS CHIAPPA
Model [--] CVTG 60-200
Year [--] 1993
Number of units [--] 1 x 100%
Electric motor
rated power [kW] n/a
voltage level [V] n/a
DISTILLATE OIL FLOW DIVIDER
BLEED VALVES

You might also like