Scribd
Upload
146 views

European Steel and Alloy Grades

Uploaded by

farshid Karpasand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
146 views

European Steel and Alloy Grades

Uploaded by

farshid Karpasand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

3/20/2014 37Cr4 / 1.

7034 - steel equivalent, mechanical properties, chemical composition

EURO PEAN ST EEL AND ALLO Y


G RADES
st eelnumber . com

Steel Steel and cast iron Alloy Equivalent Russian


Home Search About us
numbers standards standards grades steels

YOU HERE: Steel numbers -> Number 1.70XX OR Steel and cast iron standards -> / EN 10083-3 / EN 10263-
4 / EN 10250-3

37Cr4 ( 1.7034 )

Grade : 37Cr4

Number: 1.7034

EN 10083 - 3 : 2006 Steels for quenching and tempering. Technical delivery conditions for alloy steels
EN 10263 - 4 : 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery
Standard:
conditions for steels for quenching and tempering
EN 10250 - 3 : 2000 Open steel die forgings for general engineering purposes. Alloy special steels

Classification: Alloy special steel

Equivalent grades: Go here

Che m ic a l c om pos it ion % of gr a de 3 7 Cr 4 ( 1 .7 0 3 4 )


C Si Mn P S Cr

0.34 - 0.41 max 0.4 0.6 - 0.9 max 0.025 max 0.035 0.9 - 1.2

M e c ha nic a l pr ope r t ie s of gr a de 3 7 Cr 4 ( 1 .7 0 3 4 )

Nominal diameter (mm): to 16 16 - 40 40 - 100

Rm - Tensile strength (MPa) (+QT) 950-1150 850-1000 750-900

Rm - Tensile strength (MPa) (+AC) 590

Nominal diameter(mm): or for flat products


to 16 16 - 40 40 - 100
thickness: to 8; 8-20; 20-60;

Re - Upper yield strength or


750 630 510
Rp0.2 - 0.2% proof strength (MPa) (+QT)

+20°
KV - Impact energy (J) (+QT)
35

Nominal thickness (mm): to 16 16 - 40 40 - 100

A - Min. elongation Lo = 5,65 √ So (%) (+QT), round 11 13 14


products

Nominal diameter (mm): or for flat products


to 16 16 - 40 40 - 100
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=329 1/3
3/20/2014 37Cr4 / 1.7034 - steel equivalent, mechanical properties, chemical composition
Nominal diameter (mm): or for flat products
to 16 16 - 40 40 - 100
thickness: to 8; 8-20; 20-60;

Z - Reduction in cross section on fracture (%) (+QT) 35 40 40

Z - Reduction in cross section on fracture (%) (+AC) 60

Brinell hardness (HBW): (+S) 255

Brinell hardness (HBW): (+A) 235

Equiva le nt gr a de s of gr a de 3 7 Cr 4 ( 1 .7 0 3 4 )
Warning! Only for reference
USA Germany Japan France England Italy Spain China Sweden Poland Czechia Austria Russia Inter
- DIN,WNr JIS AFNOR BS UNI UNE GB SS PN CSN ONORM GOST ISO
Gr.5135 37Cr4 SCr435H 37Cr4 530A36 38Cr4 38Cr4 35Cr 2245 40H 14140 41Cr4SP 38KHA 37Cr4
38C4 530M36 F1201 40KH

M e c ha nic a l pr ope r t ie s
M e c ha nis c he Eige ns c ha f t e n
Ca r a c t e r is t ique s m e c a nique s
R eH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
R m Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

He a t t r e a t m e nt c ondit ions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved

+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Chemical composition of 37Cr4 (1.7034). Equivalent grades of 37Cr4 (1.7034). Standards of 37Cr4 (1.7034).
Properties of 37Cr4 (1.7034). Hardness of 37Cr4 (1.7034). Strength of 37Cr4 (1.7034). Elongation of 37Cr4 (1.7034).
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=329 2/3
3/20/2014 37Cr4 / 1.7034 - steel equivalent, mechanical properties, chemical composition

© 2011- 2014 All rights reserved. The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user

http://www.steelnumber.com/en/steel_composition_eu.php?name_id=329 3/3

You might also like