Scribd
Upload
111 views1 page

Bulk Ferric Chloride Tank

This document provides design calculations for a ferric chloride dosing system for phosphorus removal at a sewage treatment plant. It details the required ferric chloride dosage of 4839.30 kg/day based on the design phosphorus concentration and flow of 308299 m3/day. Two 15 m3 storage tanks and two 250 LPH metering pumps are specified to dose the 40% ferric chloride solution. Additionally, two 80 m3 bulk storage tanks are specified to provide 15 days of chemical storage.

Uploaded by

KaramSobhy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views1 page

Bulk Ferric Chloride Tank

This document provides design calculations for a ferric chloride dosing system for phosphorus removal at a sewage treatment plant. It details the required ferric chloride dosage of 4839.30 kg/day based on the design phosphorus concentration and flow of 308299 m3/day. Two 15 m3 storage tanks and two 250 LPH metering pumps are specified to dose the 40% ferric chloride solution. Additionally, two 80 m3 bulk storage tanks are specified to provide 15 days of chemical storage.

Uploaded by

KaramSobhy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REVISION

JEDDAH AIRPORT 2 INDEPENDENT SEWAGE TREATMENT PLANT (ISTP)


CLIENT DOCUMENT NUMBER DOCUMENT TITLE Rev Page
STP-Ph1-JWWF-P05-00-0002 PROCESS DESIGN CALCULATIONS D04 66
1

2 FERRIC CHLORIDE DOSING SYSTEM FOR PHOSPHORUS


3

4 DESIGN FLOW TO DISC FILTERS = 308299 m³/d


5

6 DESIGN BASIS
7 CHEMICAL PHOSPHORUS REMOVAL CONSIDERED FOR DESIGN = 2.00 mg/l
8 = 616.60 kg/d
9

10 CONCENTRATION OF FERRIC CHLORIDE SOLUTION = 40.00%


11 DENSITY OF 40% FERRIC CHLORIDE SOLUTION = 1450.00 kg/m³
12 MOLECULAR WEIGHT OF FERRIC CHLORIDE = 162.20 g/mole
13 MOLECULAR WEIGHT OF FE = 55.85 g/mole
14 MOLECULAR WEIGHT OF P = 31.00 g/mole
15

16 AMOUNT OF PHOSPHORUS TO BE REMOVED AT DESIGN AVERAGE FLOW = 616.60 kg/d


17

18 AMOUNT OF FE REQUIRED FOR P REMOVAL = 1.80 kg Fe/Kg P removed


19 MARGIN CONSIDERED = 50%
20 AMOUNT OF FE REQUIRED FOR P REMOVAL CONSIDERING MARGIN = 2.70 kg Fe/Kg P removed
21 FECL3/FE RATIO = 2.90
22 AMOUNT OF FECL3 REQUIRED FOR P REMOVAL = 7.85 kg FeCl3/Kg P removed
23

24 FECL3 REQUIRED = 4839.30 kg/d


25 = 8.34 m³/d
26

27 FERRIC CHLORIDE SOLUTION DOSING TANKS


28 NO. OF INSTALLED TANKS = 2 Nos
29 NO. OF WORKING TANKS = 2 Nos
30

31 STORAGE REQUIRED = 1.00 day


32 CAPACITY OF EACH STORAGE TANK REQUIRED = 4.17 m³
33 CAPACITY OF EACH STORAGE TANK PROVIDED = 15.00 m³ HOLD
34

35 FERRIC CHLORIDE DOSING PUMPS


36 FERRIC SOLUTION REQUIRED PER HOUR = 0.35 m³/h
37

38 NO. OF INSTALLED PUMPS = 3 Nos


39 NO. OF WORKING PUMPS = 2 No.
40 NO. OF STAND BY PUMPS = 1 No.
41 TYPE OF PUMP PROVIDED Metering Pump
42

43 CAPACITY OF EACH DOSING PUMP REQUIRED = 173.83 LPH


44 CAPACITY OF EACH DOSING PUMP PROVIDED = 250.00 LPH
45

46 FERRIC CHLORIDE BULK TANKS


47 NO. OF INSTALLED TANKS = 2.00 Nos
48 NO. OF WORKING TANKS = 2.00 Nos
49

50 STORAGE REQUIRED = 15.00 days


51 CAPACITY OF EACH BULK TANK REQUIRED = 62.58 m³
52 CAPACITY OF EACH BULK TANK PROVIDED = 80.00 m³
53

54 NOTES
55

56

You might also like