Nav 2000
Nav 2000
• Front panel STORE and RECALL functions All signal parameters are controllable from the front panel or
allow for 49 setups per mode, 294 total through the standard GPIB bus for use in manual bench and ATE
• DSP (Digital Signal Processing) test applications. STORE and RECALL functions allow quick
recall of up to 249 user-stored test setups (49 in each mode). The
• Full GPIB bus control of all features bright electroluminescent display, combined with logically grouped
keypads, provides for fast, efficient setup of avionics test signals.
The most often used signal parameters are entered with one key-
stroke by using "Hot Keys" dedicated to VOR bearing and LOC/GS
The NAV-2000R is the only generator needed to DDM selections. MODE keys access the following avionics func-
test ADF, Marker Beacon, VOR, LOC, Glideslope, tions:
HF, VHF, and UHF COMM receivers. The NAV-
2000R Signal Generator offers a frequency • VOR - bearing displayed in degrees To/From; user control of
range of 150 kHz to 450 MHz, and is loaded 30 Hz variable and 9960 Hz modulation % and frequency; user
control of 1020 Hz tone modulation with programmable Morse
with special avionic functions including the abil-
Code Ident.
ity to produce Morse Code Ident in VOR, LOC
and ADF modes; pulsed audio tones corre- • Localizer - 90 and 150 Hz modulation displayed in DDM or %
sponding to the Marker Beacon selected; two- modulation; 90/150 Hz phase control; 1020 Hz tone modulation
tone modulation; and SELCAL capability in with programmable Morse Code Ident.
COMM mode. • Glideslope - 90 and 150 Hz modulation displayed in DDM or
percent modulation; 90/150 Hz phase control.
• ADF - modulation tone variable from 10 Hz to 18 kHz; 1000 Hz
default tone modulation with programmable Morse Code Ident.
• Marker Beacon - variable 400 Hz outer marker, 1300 Hz middle
marker and 3000 Hz inner marker, with pulsed tone ident capa-
bility corresponding to selected beacon type.
• COMM - modulation tones variable from 10 Hz to 18 kHz with
two-tone capability for HF applications. SELCAL option allows
setup of ARINC 714-6 selective calling tones.
PHYSICAL CHARACTERISTICS
Weight
34 lbs (15.42 kg)
Size
17.4" x 5" x 19.3" (44.2 cm x 13.2 cm x 49 cm)
(19" x 5" x 19.3" in rack mount)