Scribd
Upload
62 views

Fire Protection Design Course: Ayman Qurany Mechanical Engineer 01004334635

The document outlines topics that will be covered in a fire protection design course including inside and outside hose stream allowance, default K-factor and sprinkler size, temperature rating, minimum desired density and area of sprinkler operation, maximum area per sprinkler, minimum operating pressure for sprinklers, water velocity through pipes, hydraulic junction point and node pressure, and damping factor.

Uploaded by

Khaled Helmy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views

Fire Protection Design Course: Ayman Qurany Mechanical Engineer 01004334635

The document outlines topics that will be covered in a fire protection design course including inside and outside hose stream allowance, default K-factor and sprinkler size, temperature rating, minimum desired density and area of sprinkler operation, maximum area per sprinkler, minimum operating pressure for sprinklers, water velocity through pipes, hydraulic junction point and node pressure, and damping factor.

Uploaded by

Khaled Helmy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

FIRE PROTECTION

DESIGN COURSE

AYMAN QURANY
MECHANICAL ENGINEER
[email protected]
01004334635
FIRE ELITE SOFTWARE
HYDRAULIC CALCULATION

19-Feb-18 2
1. INSIDE& OUTSIDE
HOSE STREAM ALLOWANCE

19-Feb-18 3
(2&4)DEFAULT K-FACTOR&
SPRINKLER SIZE

19-Feb-18 4
3. TEMPERATURE RATING

19-Feb-18 5
(5&7)MINIMUM DESIRED DENSIT Y&
AREA OF SPRINKLER OPERATION

19-Feb-18 6
(8)MAXIMUM AREA PER SPRINKLER

19-Feb-18 7
MINIMUM OPERATING PRESSURE
FOR SPRINKLER

19-Feb-18 8
WATER VELOCIT Y THROUGH PIPES

 FOR PUMP SUCTION& DISCHARGE LINE:


 V Suction = 10ft/sec = 3 m/s
 V Discharge = 13.33ft/sec = 4 m/s

 FOR NET WORK VELOCIT Y NOT TO EXCEED 2.5m/s(8.2ft/sec)

19-Feb-18 9
HYDRAULIC JUNCTION POINT
(NODE PRESSURE)

19-Feb-18 10
DAMPING FACTOR

19-Feb-18 11
19-Feb-18 12

You might also like