ART 7 SERIES

PROFESSIONAL ACTIVE
SUBWOOFERS

a new generation of speakers is born and it’s ready to rock audiences all over the world
 english

SAFETY PRECAUTIONS
Before connecting and using the amplifier, please read this instruction manual carefully and keep it on hand for future reference. The manual
is to be considered an integral part of the product and must accompany the amplifier when it changes ownership as a reference for correct
installation and use as well as for the safety precautions. RCF S.p.A. will not assume any responsibility for the incorrect installation and/or
use of the product.
WARNING: To prevent the risk of fire or electric shock, never expose this equipment to rain or humidity.
1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important information.
2. The power supply voltage of this equipment is sufficiently high to involve a risk of electrocution; therefore, never install or connect the
product with the power supply switched on.
3. Before powering up the amplifier, make sure that all the connections have been made correctly and that the voltage of your power mains
corresponds to the voltage shown on the rating plate on the unit; if it does not, please contact your RCF dealer.
4. The metallic parts of the unit are earthed by means of the power cable. In the event that the current outlet used for power does not provide
the earth connection, contact a qualified electrician to earth the equipment using the dedicated terminal.
5. To protect the power cable from damage, make sure that it is positioned so that it cannot be stepped on or crushed by objects.
6. To prevent the risk of electric shock, never open the amplifier. There are no parts on the inside that the user needs to access.
7. Make sure that no objects or liquids can get into the amplifier, as this may cause a short circuit.
8. Never attempt to carry out any operations, modifications, or repairs that are not expressly described in this manual. Contact your authorized
service centre or qualified personnel should any of the following occur:
- the amplifier does not function (or functions in an anomalous way);
- the power supply cable has been damaged;
- objects or liquids have got into the unit;
- the amplifier has been subject to heavy impact.
9. When the amplifier is not to be used for long periods of time, switch it off and disconnect the power cable.
10. If the amplifier begins to emit any strange odours or smoke, switch it off immediately and disconnect the power supply cable.
11. Do not connect this product to any equipment or accessories not specified.
For suspended installation, only use the dedicated anchoring points and do not try to hang this product using HANDLES or elements that
are unsuitable or not specific for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and the components used
for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system/installation over
time, also considering, for example, the mechanical vibrations normally generated by the transducer.
To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is specified in the instruction manual.
12. RCF S.p.A. strongly recommends this product is installed by professional qualified installers (or specialised firms) who can ensure correct
installation and certify it according to the regulations in force.
THE ENTIRE AUDIO SYSTEM MUST COMPLY WITH THE CURRENT STANDARDS AND REGULATIONS REGARDING ELECTRICAL SYSTEMS.
13. SUPPORTS AND TROLLEYS
The equipment should only be used on trolleys or supports, where necessary, that are recommended by the manufacturer. The
equipment/support/trolley assembly must be moved with extreme caution. Sudden stops, excessive pushing force and uneven floors may
cause the assembly to overturn.
14. There are numerous mechanical and electrical factors to be considered when installing a professional audio system (in addition to those
which are strictly acoustic, such as sound pressure, angles of coverage, frequency response, etc.).
15. HEARING LOSS
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing loss is different from person
to person and depends on the duration of exposure. To prevent potentially dangerous exposure to high levels of acoustic pressure, anyone
who is exposed to these levels should use adequate protection devices. When a transducer capable of producing high sound levels is being
used, it is therefore necessary to wear ear plugs or protective earphones. See the technical specifications in the instruction manual for the
maximum sound pressure the loudspeaker is capable of producing.

IMPORTANT NOTES
To prevent the occurrence of noise on the cables that carry microphone signals or line signals (for example, 0 dB), only use screened cables
and avoid running them in the vicinity of:
- equipment that produces high-intensity electromagnetic fields (for example, high power transformers);
- mains cables;
- lines that supply loudspeakers.

2
 english

OPERATING PRECAUTIONS
- Do not obstruct the ventilation grilles of the unit. Situate this product far from any heat sources and always ensure adequate air circulation
around the ventilation grilles.
- Do not overload this product for extended periods of time.
- Never force the control elements (keys, knobs, etc.).
- Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this product.

ART 7 SERIES EVOLUTION IN TECHNOLOGY, REVOLUTION IN SOUND

Back in 1996 RCF moved into the forefront of the active loudspeaker technology with the introduction of the ART Series: a loudspeakers range
that was able to deliver perfect and powerful sound with a lightweight cabinet strong enough to withstand everyday use.
The RCF R&D team kept evolving the ART technology during the last decade, developing reference products such as the ART 322-A, the ART
310-A and the new digitally amplified ART 525-A.
The RCF Team always has the performer’s needs at the forefront of the design in order to create new lines of speakers with renewed features,
improved sound clarity and definition and even lighter weight systems.
The latest iconic design is the ART 7 Series: an evolution in the active loudspeaker technology with a revolutionary design and sound.
Every detail of the 7 Series has been carefully studied in order to offer musicians and professionals the perfect tool to amplify their performance,
night after night. High quality materials, precise manufacturing, careful assembly and extensive quality control procedures complete the
groundbreaking design work of the RCF R&D team.

COMPONENTS
All the transducers in the Art 7 Series speakers feature light weight neodymium magnets in order to guarantee a better performance and
make for easier transportation.
All transducers are precision built taking advantage of RCF’s superior moulding, assembly technologies and a wealth of professional knowledge
and experience dedicated to achieving extremely high standards.

AMPLIFIERS
Art 7 Series Subwoofers are equipped with a new generation of 1000 Watt Digital Amplifiers. The result of this is very high output, extremely
low distortion and an incredible natural sound.
Each amplifier presents both Stereo XLR/jack (Combo) balanced inputs, XLR output link, volume and a switchable crossover (80 Hz/110 Hz).
The amplifier features a solid mechanical aluminium structure which not only stabilize the amplifier during transportation but also assist in
the heat dissipation.
All the Art 7 Series amplifiers presents PFC power supply section in order to produce maximum output even in case of tension drops from
main supply.

CABINETS
The new loudspeaker design looks aggressive whilst retaining familiar Art ergonomics and is the result of extensive combined functional
and acoustic research.
The Art 7 Series subwoofer cabinets are built in birch plywood and are designed to dampen down vibrations even at maximum volume
settings. The reflex porting has been resized to offer a better efficiency. The cabinet is equipped with 2 ergonomically designed forged
aluminium handles with rubber handgrip. At the top a rugged steel pole mount has been installed in all models.

3
 english

REAR PANEL FEATURES AND CONTROLS

1 STEREO JACK/FEMALE XLR INPUTS (BAL/UNBAL)
The system accept jack or XLR input connectors.

2 LIMITER LED
2 The amplifier has a built in limiter circuit to prevent clipping
3
4
of the amplifiers or overdriving the transducers. When the
1
5 soft clipping circuit is active the LED blinks orange. It is okay
if the limit LED blinks occasionally. If the LED blinks frequently
7 or lights continuously, turn down the signal level.

8 6 3 SIGNAL LED
9 The signal indicator lights green if there is signal present on
10 the main XLR input.

4 STATUS LED
The status indicator flash if the temperature protection is
active.

5 POWER LED
This green led is ON when the speaker is connected to the
main power supply and the ON/OFF is in ON position.

6 MALE XLR SIGNAL/XOVER OUTPUT

The output XLR connector provides a loop trough for speakers
daisy chaining (or provides a crossover output when the
crossover switch is pushed).

7 VOLUME CONTROL
Adjust the amplifier volume.

8 LINK/XOVER OUT SWITCH

The output link is flat when the switch is OFF (the output
signal is the same as the input signal), or is high passed when
the switch is ON (to connect a satellite speaker).

9 XOVER SWITCH
This switch sets the crossover frequency of the OUTPUT
SIGNAL at 80 Hz or 120 Hz.

10 PHASE SWITCH
This switch reverse the phase of the output signal.

11 IEC AC SOCKETS
The IEC AC socket provides IN-OUT connections for the power
cord to the socket and additional power link.

12 POWER MAIN SWITCH

The power switch turns the AC power ON and OFF.
11
12

4
 english

CONNECTIONS
2 1
The XLR connectors use the following AES standard: HOT GND
PIN 1 = GROUND (SHIELD)
PIN 2 = HOT (+) 3
COLD BAL. XLR
PIN 3 = COLD (-)

BEFORE CONNECTING THE SPEAKER

On the back panel you will find all the controls, the signal and current inputs. At first verify that the voltage selector on the speaker is in
proper position for your country (115 Volt or 230 Volt).
The switch shall be in proper position (unless moved from unauthorized people), but a fast check will avoid problems. In case is necessary
to change the voltage please call your vendor or authorized RCF SERVICE CENTRE. This operation require the substitution of the fuse value
and is reserved to an RCF SERVICE CENTRE.

BEFORE TURNING ON THE SPEAKER

At this point you can connect the power supply cable and the signal cable, but before turning on the speaker make sure that the volume
control is at the minimum level (even on the mixer output). It is important that the mixer is already ON before turning on the speaker. This
will avoid damage to the speakers and noisy “bumps” due to turning on parts on the audio chain. It is a good practice to always turn on
speakers at last and turn them off immediately after the show.
Now you can turn ON the speaker and adjust the volume control to a proper level.

INSTALLATION
A 35 MM socket for mounting a satellite loudspeaker on a pole mount is provided on the top of the cabinet.
WARNING: Never suspend ART speakers by there handles. Handles are intended for transportation, not for rigging.

PROTECTIONS
ART Series active speakers are equipped with a complete system of protection circuits. Two led on the amplifier back panel indicate the
working status of the amplifier: the green led indicate that the speaker is ON and the red led is on when the protection circuit is active. The
circuit is acting very gently on audio signal, controlling level and maintaining distortion at acceptable level. If this led is ON for a long period
is better to reduce immediately the signal level from the mixer or from the speaker volume control.

VOLTAGE SETUP (RESERVED TO THE RCF SERVICE CENTRE)

230 Volt, 50 Hz SETUP:
FUSE VALUE T10 AL 250V

115 Volt, 60 Hz SETUP:

FUSE VALUE T5 AL 250V

5
ART 7 SERIES SUBWOOFERS TECHNICAL SPECIFICATIONS

ACOUSTICAL

Frequency response 45 - 120 Hz 40 - 120 Hz

Max SPL 130 dB 131 dB

Crossover Point 80 - 120 Hz 80 - 120 Hz

TRANSDUCERS

Low frequency 12” neo 3”voice coil 15” neo 3”voice coil

AMPLIFIER

Total power 1000 Watt 1000 Watt

CONNECTIONS

Signal Input/Output Combo Stereo Jack-XLR male / XLR female

Power Input In-Out VDE AC socket
Controls Phase, Crossover Switches

ANALOG INPUT

2 way equalisation, Crossover Filtering

Fast limiter

RMS limiter

MECHANICAL

Size 515x410x550 600x445x600

Weight 29.6 Kg 34.0 Kg

Colour Black Black

10
 RCF SpA Italy
tel. +39 0522 274 411
fax +39 0522 232 428
www.rcfaudio.com
www.rcf.it
e-mail: [email protected]

RCF UK Sales Office

tel. +44 7005 402181
e-mail: [email protected]

RCF Germany Sales Office

tel. +49 2203 925370
e-mail: [email protected]

RCF USA Sales Office

tel. +1 (603) 926-4604
e-mail: [email protected]

RCF France Sales Office

tel. +33 6 07501800
e-mail: [email protected]