Scribd
Upload
73 views3 pages

European Steel and Alloy Grades: X1Crnimon25-22-2 (1.4466)

The document provides information about the steel grade X1CrNiMoN25-22-2 (1.4466) including its chemical composition, mechanical properties, standards, and equivalent grades. Details on the steel's density, classification, hardness, strength, and elongation are given.

Uploaded by

farshid Karpasand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views3 pages

European Steel and Alloy Grades: X1Crnimon25-22-2 (1.4466)

The document provides information about the steel grade X1CrNiMoN25-22-2 (1.4466) including its chemical composition, mechanical properties, standards, and equivalent grades. Details on the steel's density, classification, hardness, strength, and elongation are given.

Uploaded by

farshid Karpasand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

3/6/2014 X1CrNiMoN25-22-2 / 1.

4466 - steel equivalent, mechanical properties, chemical composition

EURO PEAN ST EEL AND ALLO Y


G RADES
st eelnumber . com

Steel Steel and cast iron Alloy Equivalent Russian


Home Search About us
numbers standards standards grades steels

YOU HERE: Steel numbers -> Number 1.44XX OR Steel and cast iron standards -> / EN 10088-2 / EN 10088-
3 / EN 10028-7 / EN 10216-5 / EN 10297-2 / EN 10088-1 / EN 10088-5

X1CrNiMoN25-22-2 ( 1.4466 )

Grade : X1CrNiMoN25-22-2

Number: 1.4466

EN 10088 - 2 : 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of
corrosion resisting steels for general purposes
EN 10088 - 3 : 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars,
rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10028 - 7 : 2007 Flat products made of steels for pressure purposes. Stainless steels
Standard: EN 10216 - 5 : 2004 Seamless steel tubes for pressure purposes. Stainless steel tubes
EN 10297 - 2 : 2005 Seamless circular steel tubes for mechanical and general engineering
purposes. Stainless steel
EN 10088 - 1 : 2005 Stainless steels. List of stainless steels.
EN 10088 - 5 : 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and
bright products of corrosion resisting steels for construction purposes

Density: 8 g/cm ³

Classification: Austenitic stainless steel - special grade

Equivalent grades: Go here

Che m ic a l c om pos it ion % of gr a de X 1 Cr NiM oN2 5 - 2 2 - 2 ( 1 .4 4 6 6 )


Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for
finishing the cast.

C Si Mn Ni P S Cr Mo N

max 0.02 max 0.7 max 2 21 - 23 max 0.025 max 0.01 24 - 26 2 - 2.5 0.1 - 0.16

M e c ha nic a l pr ope r t ie s of gr a de X 1 Cr NiM oN2 5 - 2 2 - 2 ( 1 .4 4 6 6 )

Rm - Tensile strength (MPa) (+A) 540-740

Rm - Tensile strength (MPa) (+AT) 540-740

Rp0.2 0.2% proof strength (MPa) (+A) 250

Rp0.2 0.2% proof strength (MPa) (+AT) 260

KV - Impact energy (J) transverse, (+A) +20° -196°


60 60

+20°
KV - Impact energy (J) longitud., (+A)
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=116
100 1/3
3/6/2014 X1CrNiMoN25-22-2 / 1.4466 - steel equivalent, mechanical properties, chemical composition
KV - Impact energy (J) longitud., (+A)
100

A - Min. elongation at fracture (%) (+A) 35-40

A - Min. elongation at fracture (%) longitud., (+AT) 40

A - Min. elongation at fracture (%) transverse, (+AT) 30

Brinell hardness (HB): (+A) 240

P r ope r t ie s of gr a de X 1 Cr NiM oN2 5 - 2 2 - 2 ( 1 .4 4 6 6 )


Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
Steel shal not be applied at a metal temperature lower than -270 ° C

Equiva le nt gr a de s of gr a de X 1 Cr NiM oN2 5 - 2 2 - 2 ( 1 .4 4 6 6 )


Warning! Only for reference
USA France
- AFNOR
S310050 Z2CND25.22Az

M e c ha nic a l pr ope r t ie s
M e c ha nis c he Eige ns c ha f t e n
Ca r a c t e r is t ique s m e c a nique s
R eH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
R m Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

He a t t r e a t m e nt c ondit ions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled

+QA Air quenched and tempered


+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=116 2/3
3/6/2014 X1CrNiMoN25-22-2 / 1.4466 - steel equivalent, mechanical properties, chemical composition
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Chemical composition of X1CrNiMoN25-22-2 (1.4466). Equivalent grades of X1CrNiMoN25-22-2 (1.4466). Standards of


X1CrNiMoN25-22-2 (1.4466).
Properties of X1CrNiMoN25-22-2 (1.4466). Hardness of X1CrNiMoN25-22-2 (1.4466). Strength of X1CrNiMoN25-22-2 (1.4466).
Elongation of X1CrNiMoN25-22-2 (1.4466).

© 2011- 2014 All rights reserved. The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user

http://www.steelnumber.com/en/steel_composition_eu.php?name_id=116 3/3

You might also like