CPSC 6128 – Network Security Name: __Antony Munyao 1033980 &

Dalmas Kiranga 1032779

Spring 2004

LABORATORY EXERCISE 2a
Public-Key Encryption

When one transmits data over a packet-switched network, like the Internet, a packet
sniffer at any node along the transmission path can detect packets with potentially useful
information. Unfortunately, some of this information (for example, credit card numbers
or other private information) is most useful to people with dishonorable (and often crimi-
nal) intentions. As commerce over the Internet – and other vulnerable long-distance
networks – increases, this problem becomes more critical. Private data stored on a
computer that’s accessible over a network is also vulnerable

One solution to this problem is to encipher data one wants to keep private. In other
words, one can somehow “scramble” the data so that it’s unrecognizable to anyone who
does not have the necessary key to “unscramble” – or decipher – it. In so-called
“traditional” encryption techniques, the same key is used for enciphering (or encryption)
and deciphering (or decryption). The key is typically a large number that is used to
mathematically transform the message. The problem then becomes the secure
transmission of the key itself.

One solution to this problem is to use two different keys – one for encryption and the
other for decryption. Alice could then send her encryption key to Bob1, who could use it
to send an encoded message back to Alice. Provided Alice keeps her decryption key
private, no one who intercepts the message will be able to decode it.2 In fact, Alice could
make her encryption key publicly available, so that Carol, David, Egbert, or anyone else
who wants to do so can send her an encoded message. So long as she keeps her
decryption key secret, no one else will be able to read messages meant only for Alice.
For this reason, this type of system is called a public-key encryption system. Often, the
encryption key is called the public key, and the decryption key is called the private key.

In this lab, you will be working with a simplified – and not very secure – version of one
of the most popular public-key systems: the RSA public-key encryption system.3 Like all
public-key systems, the keys are derived using a “trapdoor” operation – an operation that
is easy to do but difficult to “undo.” In RSA, this operation is the multiplication of two
large prime numbers: it is easy and fast to multiply the two numbers together, but it is
significantly more difficult and time consuming to factor the resulting number back into
its prime components. In this lab experience, you will be using relatively small primes

1
Alice and Bob are the parties to encrypted data exchanges throughout the literature on encryption. If a
third party is needed, she’s often named Carol, for some reason.
2
I’m assuming that Alice is using so-called strong encryption. Otherwise, a cryptanalyst – someone whose
profession is breaking codes – who intercepts the message will still be able to decode it.
3
Named for its inventors – Ron Rivest, Adi Shamir and Leonard Adelman.
CMPT 109 Name: ________________________
Lab VIII: page 2
(only three digits) to see how this system works.

To explore this system in more depth, you will be exchanging encrypted messages with
your classmates.

1. Launch Microsoft Excel and open the spreadsheet

http://csc.colstate.edu/summers/NOTES/6128/labs/encryption/rsa.xls.

You may see a warning message informing you that the workbook contains macros.
Since you will not need these macros to use the workbook (they are left over from an
older and less efficient version of this lab), click on the Disable Macros button.

2. This spreadsheet makes use of some specialized functions that are not part of the
standard function set in Microsoft Excel. However, they are included in an extra set
of functions called the Analysis Toolpak. From the Tools menu, choose Add-Ins….
In the dialogue box, click on the check box to the left of the entry Analysis
Toolpak. When a checkmark appears, click on OK.

3. If necessary, click on the tab for the Key Selection worksheet. Use a random
process to choose two different prime numbers p and q between 137 and 311
(displayed in a list in cells g5:I15). Enter these primes in cells B6 and B7. Be sure
that cells C6 and C7 both display the message “OK”. The spreadsheet automatically
computes the modulus (the product p*q) in cell B8 and the Euler totient (the product
(p-1)*(q-1)) in cell B9. Note that the Euler totient would be difficult to determine
from the modulus by itself; one needs to know the two primes. Write your two
primes, your modulus, and your Euler totient below:

p: __137_____ q: ____191_______ modulus: ____26167_______

Euler totient: _____25840_________

4. Choose a small number (no more that two digits) that has no factors (except 1) in
common with the Euler totient. Enter this number as your public key and enter it in
cell B15. If cell C15 displays the message Invalid Public Key, you need to select a
different public key. When you have chosen a valid public key, the message OK will
appear in cell C15. The spreadsheet will automatically compute your private key in
cell B20. The private key is chosen so that (Public Key)*(Private Key) leaves a
remainder of one when divided by the Euler totient. (This would not be possible if
the private had a factor other than 1 in common with the Euler totient.) Write your
public and private keys below:

Public key: _____21________

Private key: _______2461________

CMPT 109 Name: ________________________
Lab VIII: page 3

5. Once both you and your partner have each created a modulus and pair of keys, you
are ready to exchange encrypted messages. Give your modulus and public key to
your classmates. Do not give your classmates your private key or Euler totient. In
return, your classmate will give you her/his public key and modulus.

6. Click on the tab for the Encoding worksheet. Enter your classmate’s modulus and
public key in cells B6 and B7. Write these values below:

Classmate’s modulus: ____27331_____________

Classmate’s public key: _______71___________

7. Enter a message in cell B11. This message should consist of a string of fifteen or
more CAPITAL LETTERS with no spaces or punctuation marks. The spreadsheet
will encipher only the first fifteen letters of your message. Your message could be a
short phrase or sentence, your mother’s name or your pet iguana’s name. For
example, I used ABCDEFGHIJKLMNO to test this spreadsheet. Note that a
message to be enciphered is usually called plaintext. The enciphered form of the
message is called the ciphertext.

8. The enciphered form of the message (the ciphertext) should appear in cell B13. (This
may take a few seconds.) The spreadsheet determines the ciphertext as follows:

 Split the plaintext up into blocks of three letters (called trigraphs).

 Obtain a numeric representation for each letter based on its position in the
alphabet (A→0, B→1, etc.).
 Compute a numeric code for each trigraph using the formula

(First Letter Code) * 262 + (Second Letter Code) * 26 + (Third Letter code).

For the mathematically inclined, this is interpreting each trigraph as a number in

base twenty-six.

 Encipher each plaintext trigraph code by computing

(Plaintext trigraph code)Public Key, dividing the result by the Modulus and
taking the remainder.
 Convert each enciphered trigraph code into a quadragraph – a block of four
letters – as follows:

 Divide the code by 263. The quotient is the code for the first letter of the
quadragraph. The spreadsheet uses the remainder to get codes for the other
three letters.
 Divide the remainder from the first step by 262. The quotient is the code for
the second letter. The spreadsheet uses the remainder to get the codes for the
other two letters.
CMPT 109 Name: ________________________
Lab VIII: page 4
 Divide the remainder from the second step by 26. The quotient is the code for
the third letter and the remainder is the code for the fourth letter.

For the mathematically inclined, this quadragraph calculation determines the

representation of the enciphered message as a four-digit number in base
twenty-six (using the letters of the alphabet as our digits).

Some of the details of this calculation appear in cells A16:K38 of the

Encoding worksheet. Enter the plaintext and ciphertext below. Show the
steps of the conversion process in the table.

Plaintext: ____________________KITKATKATUMOSPI_________________

Plaintext Ciphertext
Trigraph Trigraph Code Enciphered Code Quadragraph
KIT 6987 5342 AHXM
KAT 6779 8833 ANBT
KAT 6779 8833 ANBT
UMO 13846 12420 ASJS
SPI 12566 19900 BDLK

Ciphertext: _________________AHXMANBTANBTASJSBDLK_____________

9. Give the ciphertext (but not the plaintext) to your classmate. In return, your
classmate will give you a ciphertext message. Record the ciphertext message from
your classmate below. In the rest of this exercise, you will be deciphering this
message.

Ciphertext from classmate:

___________BLKBACRUABNGAFITAENU__________________

10. Click on the tab for the Decoding worksheet. Enter your modulus and your private
key in cells B6 and B7 of this worksheet. Enter the ciphertext you received from
your classmate as the “Encrypted Message” in cell B13. The deciphering process is
similar to the enciphering process:

 Split the ciphertext up into quadragraphs (instead of trigraphs).

 Obtain the numeric representation for each letter and compute a numeric code for
each trigraph using the formula

(First Letter Code) * 263 + (Second Letter Code) * 262 +
(Third Letter Code) * 26 + (Fourth Letter Code).
CMPT 109 Name: ________________________
Lab VIII: page 5
Encipher each ciphertext quadragraph code by computing

(Ciphertext quadragraph code)Private Key,

dividing the result by the Modulus and taking the remainder

 Convert each deciphered quadragraph code into a trigraph.

 Divide the code by 262. The quotient is the code for the first letter.
 Divide the remainder from the first step by 26. The quotient will be the code
for the second letter and the remainder the code for the third.

Note that deciphering uses the private key in place of the public key. Some
of the details of this calculation appear in cells A19:D23 of the Decoding
Worksheet. The deciphered message should appear in cell B13. Record the
results of each deciphering step in the table below.

Ciphertext Plaintext
Quadragraph Quadragraph Deciphered Code Deciphered
Code Trigraph
BLKB 25273 13030 THE
ACRU 1814 1207 BUL
ABNG 1020 7528 LDO
AFIT 3607 4075 GAT
AEWU 3296 3296 TAC

Now, write the deciphered message (plaintext) below.

Deciphered message: _____THEBULLDOGATTAC________________

11. Quit Excel. You do not need to save changes. Shut down the computer. When
you’re finished, post to the dropbox or e-mail this lab in to the instructor.

This lab is a modification from a lab by Dr. Benham at Montclair University

(http://www.csam.montclair.edu/~benham/enclabs/)