SPECIFICATION DATA

Risk Area Heat Detector

with Explosion-Proof Junction Box
Model HD

DESCRIPTION FEATURES AND BENEFITS

The Model HD Risk Area Heat Detector accurately senses the S Repeatable - resets itself, nothing to replace, testable
surrounding air temperature and actuates an electrical contact output at a S Rugged - withstands shock and vibration
pre-determined temperature. The expansion coefficients of the metal
alloys used in the construction of the detector enable the hermetically S Versatile - various temperature settings available
sealed contact to activate at a precise point. S Economical - wide spacings reduce installation costs
The Model HD Detector can be used as an alarm device to sense S Factory set internal contact area is hermetically sealed in
excessive heat or fire and warn personnel, or it can be used as a signaling stainless steel
device to sense fire and send a signal to an alarm panel for actuation S Ease of wiring and installation
of a fire suppression system.
S Aluminum or stainless steel junction box, stainless steel heat
The design of the heat detector utilizes Rate Compensation, which detector
provides enhanced performance when compared to fixed-temperature
S Models approved and certified to FM, CSA, ATEX, IECEx, and
or rate-of-rise detectors. Rate-of-rise devices rely on a rapid rate of
INMETRO Hazardous Location standards
increase in the ambient temperature to actuate an output and are
subject to false alarms caused by warm thermal currents resulting S Models certified by Exida for SIL 2 Safety Instrumented System
from various industrial processes. Fixed temperature detectors must applications
be completely heated to the alarm setpoint in order to activate and S Models IP66/67 and NEMA Type 4x rated
can require a longer than desired response time in the event of a
rapidly growing fire. The Model HD Detector senses the surrounding
air temperature and actuates its output when the temperature
reaches the pre‑determined level, regardless of the fire growth
rate. The unique properties of the alloy outer shell allow the Model
HD to respond more quickly as the fire growth rate increases;
i.e. the faster the fire grows, the sooner the unit will react.
The heat detector and integral explosion-proof junction box have
been properly evaluated and certified for high temperature exposure
conditions. The detector’s electrical contact is factory wired to a screw
terminal block located within the junction box. All external wiring to the
device is also connected to this screw terminal block. The junction box
material type is available in aluminum or stainless steel, with two or four
conduit entries, and either 3/4 inch NPT or 25 mm threads.
The Model HD is ideally suited for use in hazardous (classified)
locations.

4.2 6/17 90-1211

 SPECIFICATIONS

Terminals UL/CSA rated for 12-26 AWG, 2.5–1.5 mm2 wire. Certification
Screw terminal required torque range is 3.5–5.3 in.- FM/CSA: Class I, Div. 1, Groups B, C & D (T4)
lbs. (0.4-0.6 N•m). Class I, Div. 2, Groups A, B, C & D (T3A)
Class II/III, Div. 1/Div. 2, Groups E, F, & G (T4)
FM ®
Electrical Rating Open circuit monitoring: Tamb = –40°C to +125°C
1.0 Amp maximum @ 18-30 Vdc (resistive).
APPROVED
Enclosure Type 4X
Open & short circuit monitoring: IP66/IP67
FM ®
1.0 Amp maximum @ 18-30 Vdc (resistive). APPROVED
Conduit seal not required
For FM and CSA Zone approval information, refer to
Ambient Temperature Range Operating: –40°C to +125°C (–40°F to +257°F). the Model HD instruction manual (95-8666).
Storage: –40°C to +125°C (–40°F to +257°F).
ATEX: 0539 II 2 G D
FM
APPROVED
®

Humidity Range 5 to 95% RH, non-condensing. FM12ATEX0032X

Ex db eb IIC T4
Shipping Weight Aluminum: 4.5 lb (2.0 kg) F M ® Ex tb IIIC T85°C
Stainless Steel: 9.7 lb (4.4 kg)
APPROVED
T4 (Tamb –40°C to +75°C)
IP66/67
Thread Options 3/4 inch NPT or M25. ––OR––
Two (#2, #6) or four port (#2, #3, #5, #6)
models available (see diagram below). 0539 II 2 G D FM
APPROVED
®

Note: NEMA 4 / IP66 / IP67 rating requires the FM12ATEX0032X

use of IP washers / IP glands (M25). Ex db IIC T4
Dimensions Ex tb IIIC T135°C
T4 (Tamb –40°C to +125°C)
IP66/67

IECEx: IECEx FMG 13.0009X

3.77
(9.6) Ex db eb IIC T4
Ex tb IIIC T85°C
1.28 T4 (Tamb –40°C to +75°C)
(3.3)
IP66/67
––OR––
~10.6
(~26.9)
IECEx FMG 13.0009X
5.2 Ex db IIC T4
(13.2)
2.7 Ex tb IIIC T85°C
(6.9) T4 (Tamb –40°C to +125°C)
#2 #3 IP66/67
3.7
(9.4) INMETRO: UL-BR 15.0409X
4.7 Ex tb IIIC T85°C Db
(11.9) 0.6
3.46 (1.5) T4 (Tamb –40°C to +75°C)
(8.8) IP66/67
––OR––
#6 #5 Ex tb IIIC T135°C Db
C2539
T4 (Tamb –40°C to +125°C)
Dimensions of Heat Detector in Inches (cm)
IP66/67

Temperature Specifications and Maximum Detector Spacing Values

Setting Tolerance Spacings feet (meters)
RTI1 Color Coding2
° F (° C) ° F (° C) UL ULc FM
140 (60) +7/-8 (±4) 50 (15) 50 (15) 25 (8) Fast Black
160 (71) +7/-8 (±4) 25 (8) 25 (8) 25 (8) Fast Black
190 (88) +7/-8 (±4) 50 (15) 50 (15) 25 (8) Fast White
210 (99) +7/-8 (±4) 25 (8) 50 (15) 30 (9) V- Fast White
225 (107) +7/-8 (±4) 25 (8) 50 (15) 30 (9) V- Fast White
275 (135) ±10 (±6) 25 (8) 50 (15) 30 (9) V- Fast Blue
325 (163) ±10 (±6) 50 (15) 50 (15) 30 (9) V- Fast Red
360 (182) ±10 (±6) 25 (8) 50 (15) 30 (9) V- Fast Red
450 (232)3 ±15 (±8) 25 (8) 50 (15) 30 (9) V- Fast Green
500 (260)3 ±15 (±8) 50 (15) 50 (15) 30 (9) V- Fast Orange
600 (316)3 ±20 (±11) N/A 50 (15) 30 (9) V- Fast Orange
725 (385)3 ±20 (±11) N/A 50 (15) 30 (9) V- Fast Orange

1 Response Time Index - Measurement of the Heat Detector’s sensitivity and speed of response. For more information, refer to standards FM 3210 and EN 54-5.
2 Color of the printing on the detector.
3 Setting available only with FM/CSA Division approvals.

Specifications subject to change without notice.

All trademarks are the property of their respective owners.
© 2020 Detector Electronics Corporation. All rights reserved. ­Corporate Office Phone: +1 952.941.6665
6901 West 110th Street Toll-free: +1 800.765.3473
Det-Tronics manufacturing system is certified to ISO 9001—
Minneapolis, MN 55438 USA Fax: 952.829.8750
the world’s most recognized quality management standard.
www.det-tronics.com [email protected]