 The Rescobond family of products are “Chemically Bonded”, air -setting refractory castables that are prepared for use by
simply adding water. They develop a quick set and can be heated shortly after installation without a controlled dryout sched-
ule to provide the fastest ”back on line” time possible. Rescobond’s chemically bonded system provides adherence to existing RESCOCAST  
refractory, making it a highly eff ective monolithic repair material.  
Rescobond AA-22S is a premium, abrasion/erosion resistant chemically bonded castable, which has set the industry stand-
RESCO


ard for performance and long service life throughout its range of applications. Rescobond AA -22S readily bonds to other re- SUREFLOW  
fractory surfaces; it is ideal as a quick and easy patch/permanent patch for worn linings. Rescobond AA -22S offers the bene-
fits of air -setting, low shrinkage and consistent results. Rescobond AA -22S is particularly effective in thin, metal -anchored PRODUCTS

and metal reinforced linings. 
The Rescocast family of “Extreme Service Castables” is a complete line of specialty castables blended for specific application
R -MAX  
and performance requirements. Formulations are available for hydrogen and/or carbon monoxide-rich reducing atmospheres,
for low thermal conductivity and high r esistance to thermal shock, for critical wear areas, in high abrasion/erosion applications
and wherever a high ratio of strength to insulating value is required.   VIBROCAST  
HIGH
PERFORMANCE
 Rescocast 110C & 110G are monolithics that combine strength and abrasion resistant qualities with low thermal conductivity,
in a product that can be either cast or gunned.   REFRACTORIES
 Rescocast 17AC & 17AG are 95% alumina, cement bonded monolithics designed for application s up to 3400 oF (1870oC).
applications
The low iron & silica contents (<0.1% each), make them suitable for applications in hydrogen and/or carbon monoxide -rich
RESCOBOND FOR  THE  

reducing atmospheres. 
Rescocast 17EC, 17EPC & 17EG are Resco’s premium and most widely applied monolithics with an abrasion/erosion re-
AA-22S  
Hydrocarbon
sistance of < 10cc loss for the cast and < 14cc loss for the gunited product. These cement bonded monolithics can be cast,


vibra-cast, dry gunned, pumped or wet shotcreted. The Rescocast 17E series are t he “specified” products in the industry.  
Rescocast 88VC is a casting grade erosion resistant refractory, designed specifically for vibration casting. The physical prop-
PACOCAST  
Processing
erties define the product’s name…. Less than 8 cc abrasion/erosion loss and less than 8 “k” Value.  



Rescocast 88HP
fications and is anfor
chosen erosion resistant
its ease product
of mixing designed for
and placement.   “handpacking” applications, capable of meeting rigid field speci-
Rescocast 17EMC & 17EMG have been developed by using a patented blend of raw materials. These monolithics were de-
QUIKTURN  
Industry  


signed for lower thermal conductivity and high resistance to thermal shock
R-MAX MP is a 2400oF high performance castable designed to provide maximum abrasion/erosion resistance and superior
RESCOLITE  

ease of application. The product’s zero -slump and soft “easy to install” texture, results in high handpack installation rates,
while the low green to fired shrinkage of refractory translates into stronger, longer lasting service life.  
 R-MAX C & G are 3200oF, low cement, high performance castables that are designed to exhibit very low abrasion/erosion
RESCOCAST  
AN AMERICAN-OWNED
REFRACTORY COMPANY 
loss and maximized physical properties.  
 Rescocast RS-3005NS is a high purity alumina insulating castable. Vibration casting is the recommended installation method
for this product. This product features a low thermal conductivity and a very high maximum temperature limit. The trace
amounts of silica and iron oxide make this product ideal for use in carbon monoxide and hydrogen atmosphere
atmospheress especially at
SUREFLOW  

high temperatures. Available for hydrogen processing units, second stage ammonia reformers, etc. which require a


high alumina, no silica product.
product . 
Resco Products, "Insulating Castables" are available, ranging in density from 25 to 95 pounds a cubic foot. All products are
manufactured under careful supervision to strict technical standards. Several products are well suited for use in difficult a ppli-
R -MAX
 

cation areas, including reducing atmospheres. 

 Most products are available in a “PC” (Pumpcast) version for placement by “pumping, casting, or shotcreting.  
VIBROCAST  

 Sureflow products are self flowing and leveling products having low water requirements and require no vibration. These


products include conventional and low cement formulations.
Products for these applications are not limited to those indicated in this brochure. Please contact your local Resco sales rep-
RESCOBOND
resentative or Resco’s website for additional product information.  
AA-22S
 

RESCO PRODUCTS, Inc   Phone: 888.283.5505    

Two Penn Center West, Suite 430  
Pittsburgh,, PA 15276  
Pittsburgh
Phone: 412.494.4491 
Fax: 412.294.1080   PACOCAST
 April 2008 
www.rescoproducts.com 
 

Stack  
CO BOILER 
 SULFUR RECOVERY UNIT   < 2800 oF >2800 oF 
RS 8 Rescocast 17 AC  
MAIN BODY BURNER THROAT  CHECKER WALL RS 9LI Rescocast 17 AG 
Rescal 90 XD Rescocast 17AC Rescal 90 XD  RS 8 (backup) 
(Backup) LW 28/30, Purolite 30 Purotab Rescal 70 D 
EZ3 85 Seneca 80 XD   Seal Pots  
EZ3 3250 
OVERHEAD LINES  
INLET TUBE  TUBE SHEET 
Rescocast 9 LI   Rescocast 17A  LINES SEVERE EROSION AREAS 
Rescocast 8   Sureflow 17A  Rescocast 17 EMC/G Rescocast 17 EC/G 
Purotab  Rescocast 110 C /G Sureflow 17 E  
Sureflow 110 Quikturn 60 PC/G 
ProGun FS-6
EZ3 FS-6 

 REGENERATOR 
VESSEL
RS 6  REACTOR 
RS 7  CYCLONES &
FR CTION TOR OTHER  
RS 9LI 
RS 6 PC  COLD WALL HOT WALL INTERNALS  
EROSIVE AREAS  Rescocast 17 EC/G Rescobond AA-22S Rescobond AA-22S 
Rescocast 110C/G  Rescocast 6 R -MAX MP/C/G R -Max MP/C/G 
Sureflow 110  Rescocast 7
CYCLONES & Rescocast 110C/G
OTHER INTERNALS  Rescocast 6 PC  
Rescobond AA-22S  VENT  
R -MAX MP/C/G 

 STANDPIPES, REACTOR RISER, SPENT

SPENT CAT LINES,
 J BENDS, ETC. 
COLD WALL  HOT WALL  SEVERE EROSION 
CRUDE Rescocast 17 EMC Rescobond AA-22S Rescocast 17 EC   STACKS  
Rescocast 110 C/G R -MAX MP/C/G Sureflow 17 E   RS 9LI/ RS 9    SEAL POTS  
Sureflow 110 Rescocastt 88 VC/HP 
Rescocas RS 3  Vibrocast FS-6 
Vibrocast FS-6C  ProGun FS-6G 
Vibrocast FS-6G  EZ3 FS-6PC 
Sureflow FS-6 
Rescocast 15 GM  
Pacocast 24 AR  

FIRED HEATER 
TERTIARY (3RD STAGE) COLLECTOR  
RS 3-35P   AIR HEATER 
RS 3  CYCLONES &
RS 9LI  VESSEL OTHER INTERNALS 
Rescocast 17 AC/AG  RS 6  Rescobond AA-22S 
RS 8  Sureflow 17A  RS 7  R -MAX MP/C 
RS 8 (backup)   RS 9LI 
Rescocast 110 C/G 
C/G 

RECOMMENDATIONS– FCC UNIT  

 PRODUCT RECOMMENDATIONS–