Scribd
Upload
56 views

Diagnostic Test Technology & Livelihood Education Grade 8: A. Dovetail Saw

This document appears to be a diagnostic test for a Technology and Livelihood Education class in the Grade 8 section of Monkayo National High School in the Philippines. It contains 15 multiple choice questions testing knowledge of tools, materials, measurements and safety practices related to carpentry. The questions cover topics like identifying tools like nails, files and saws; computations involving board feet and converting between feet and inches; tools used for holding, leveling and checking measurements of wood; processes for inventorying and labeling functional and non-functional equipment; and lubricating parts of tools and machines.

Uploaded by

Haier Koppel Skyworth
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
56 views

Diagnostic Test Technology & Livelihood Education Grade 8: A. Dovetail Saw

This document appears to be a diagnostic test for a Technology and Livelihood Education class in the Grade 8 section of Monkayo National High School in the Philippines. It contains 15 multiple choice questions testing knowledge of tools, materials, measurements and safety practices related to carpentry. The questions cover topics like identifying tools like nails, files and saws; computations involving board feet and converting between feet and inches; tools used for holding, leveling and checking measurements of wood; processes for inventorying and labeling functional and non-functional equipment; and lubricating parts of tools and machines.

Uploaded by

Haier Koppel Skyworth
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Republic of the Philippines

Department of Education
Region Xl
Division of Compostela
MONKAYO NATIONAL HIGH
SCHOOL The Breeding Ground of Achievers

DIAGNOSTIC TEST
Technology & Livelihood Education
GRADE 8

NAME: SECTION:

DlrecNons: Choose he letter of the correct answer. Write your answer on the space provided before the
number. STRICTLY NO ERASURES.

I . Implements manipulated by the hand to facilitate carpentry works.


a. Tools b. Materials c. Equipment d. Hardware
2. Made of metal Used for fastening woods.
d. Ripsaw
a. Nails b. Cement c. Lumber
3. Used for sharpening edge cutting tools such as chisel. d. Saw Set
a. Oil Stone b. Files c. Paint Brush
4. Hand saw used to cut the wood along the grain. d. Back saw
a. Dovetail saw b. Compass saw c. Rip saw d. Back saw
5. Used to cut irregular shape either in large or small board.
a. Dovetail saw b. Compass saw c. Rip saw d. C-Clamp
6. Tool Used for boring holes either in metals, woods or plastics.
a. Drill Bit b. Expansive bit c. Auger bit

7. Used to hold large boards or frames together while assembling or gluing.


a. Bar clamp b. Bench Vise c. C-clamp D. File
8. Which shall be used when an immediate hazard exists?
a. signs, signal & barricades b. danger signs c. exit signs d. safety instructions signs
9. Which shall be used as temporary means of warning an existing hazard such as defected
tools, equipment. etc?
a. danger Signs b. accidental Prevention Tags c. traffic signs d. directional signs
10. Accidents can be prevented
a. through proper care and maintenance of tools and equipment
b.right attitude toward work
c. if you have a good knowledge about safety practices
d.None of the above
C 1 1 . Compute the board foot of lumber whose dimension is 2" x 4 "x 12"

12. Convert Foot to inches; 3 ft = inches.

a. 35 Inches b. 36 Inches c. 1 6 Inches d. 15 Inches


13. When YOU wanted to check the measurement s of a wood in a vertical and horizontal
position, you need to use;
a. Bar clamp b. Level bar c. C-clamp
14. How would you do first in order to segregate and label non-functional Tools and
Equipment?
a. Conduct an inventory of tools and equipment
b.Report the number of tools and equipment
c. Record non-functional and functional equipment
d.Label tools and equipment are condemnable
15. How would you lubricate tools and equipment?
a. Determine the parts of the machine needed to be lubricated and apply thin coat
of oil on the parts for a long period of time.-
1

You might also like