Scribd
Upload
88 views1 page

Heat Exchanger Specification Sheet Thermal NEC Units

This document is a heat exchanger specification sheet containing technical details such as dimensions, materials, and performance parameters. It specifies a horizontal shell and tube heat exchanger that is 737 mm x 2999.96 mm in size. It will transfer 0.2439 megawatts of heat between its shell side, carrying 16-200 fluid at -7.87C, and tube side, carrying yyy fluid at 28.99C. Key components include 662 carbon steel tubes, a single-segmented baffle design, and connections that allow for 1 parallel and 1 series configuration.

Uploaded by

mohsen ranjbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
88 views1 page

Heat Exchanger Specification Sheet Thermal NEC Units

This document is a heat exchanger specification sheet containing technical details such as dimensions, materials, and performance parameters. It specifies a horizontal shell and tube heat exchanger that is 737 mm x 2999.96 mm in size. It will transfer 0.2439 megawatts of heat between its shell side, carrying 16-200 fluid at -7.87C, and tube side, carrying yyy fluid at 28.99C. Key components include 662 carbon steel tubes, a single-segmented baffle design, and connections that allow for 1 parallel and 1 series configuration.

Uploaded by

mohsen ranjbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

HEAT EXCHANGER SPECIFICATION SHEET Page 1

Thermal NEC Units

Job No.
Customer Reference No.
Address Proposal No.
Plant Location Date 2/5/2017 Rev
Service of Unit Item No.
Size 737.000 x 2999.96 mm Type BEM Horz. Connected In 1 Parallel 1 Series
Surf/Unit (Gross/Eff) 118.85 / 113.86 m2 Shell/Unit 1 Surf/Shell (Gross/Eff) 118.85 / 113.86 m2
PERFORMANCE OF ONE UNIT
Fluid Allocation Shell Side Tube Side
Fluid Name 16-200 yyy
Fluid Quantity, Total kg/hr 15345.1 4409.34
Vapor (In/Out) 4409.34 1748.03
Liquid 15345.1 15345.1 2661.31
Steam
Water
Noncondensables
Temperature (In/Out) C -7.87 16.71 28.99 11.16
Specific Gravity 0.5857 0.5549 0.4307
Viscosity mN-s/m2 0.1859 0.1458 0.0115 0.0112 V/L 0.0703
Molecular Weight, Vapor
Molecular Weight, Noncondensables
Specific Heat kJ/kg-C 2.2409 2.4228 2.5382 2.4401 V/L 3.453
Thermal Conductivity W/m-C 0.1042 0.0938 0.0266 0.0262 V/L 0.087
Latent Heat kJ/kg 242.611 249.965
Inlet Pressure bar 35.501 30.800
Velocity m/s 8.439e-2 0.14
Pressure Drop, Allow/Calc bar 0.050 0.040 0.010 8.549e-3
Fouling Resistance (min) m2-K/W 0.000170 0.000170
Heat Exchanged MegaWatts 0.2439 MTD (Corrected) 15.4 C
Transfer Rate, Service 139.04 W/m2-K Clean 145.65 W/m2-K Actual 137.85 W/m2-K
CONSTRUCTION OF ONE SHELL Sketch (Bundle/Nozzle Orientation)
Shell Side Tube Side
Design/Test Pressure barG 38.001 / 33.000 /
Design Temperature C 72.00 60.00
737

No Passes per Shell 1 1 mm

Corrosion Allowance mm
Connections In mm 1 @ 77.900 1 @ 77.900 3
m

Size & Out mm 1 @ 77.900 1 @ 77.900


Rating Intermediate @ @
Tube No. 662 OD 19.050 mm Thk(Avg) 2.110 mm Length 3.000 m Pitch 26.000 mm Layout 30
Tube Type Plain Material CARBON STEEL
Shell ID 737.000 mm OD mm Shell Cover
Channel or Bonnet Channel Cover
Tubesheet-Stationary Tubesheet-Floating
Floating Head Cover Impingement Plate None
Baffles-Cross Type SINGLE-SEG. %Cut (Diam) 14.50 Spacing(c/c) 200.000 Inlet 336.985 mm
Baffles-Long Seal Type
Supports-Tube U-Bend Type
Bypass Seal Arrangement Tube-Tubesheet Joint
Expansion Joint Type
Rho-V2-Inlet Nozzle 1366.29 kg/m-s2 Bundle Entrance 170.91 Bundle Exit 180.39 kg/m-s2
Gaskets-Shell Side Tube Side
-Floating Head
Code Requirements TEMA Class
Weight/Shell 5281.35 Filled with Water 6754.71 Bundle 2157.04 kg
Remarks:

Reprinted with Permission (v6 )

C:\Users\l.seyedi.NARCOM\Desktop\desktop 10-95\leila\Kangan Ex\82\Rev 1 based on sheila-2-edit\8203.htri

You might also like