4/11/2011 API - Valve Standards

Resources, Tools and Basic Information for Engineering and Design of Technical Applications!
Ads by Google API Management ANSI API API Standard API Rating API 650

Search Recommend Engineering News

Custom Search

Home API - Valve Standards PrinterFriendly

• Acoustics
An overview of the American Petroleum Institute - API - valve standards
• Air Psychrometrics ToolBox ShortList
• Basics • Add this Page!
Sponsored Links
• Combustion
• Drawing Tools Link to this Page!
Valve Specification Guide for writing valve spec. Design/Trim/Actuation/Sizing www.masterflo.com
• Dynamics
• Economics Butterfly Valve Manufacture butterfly Valve In Wcb, Lcb, 304, 304L, 316L, et www.hongyechina.com
• Electrical
Pressure Reaction Speed process screening and chemical development www.mt.com
• Environment
• Fluid Mechanics Amorphous API
Seminar
• Gas and Compressed
Air Valve standards from API - the American Petroleum Institute: Free seminars on
• HVAC Systems amorphous
• Hydraulics and API SPEC 6D material stability
Pneumatics Specification for Pipeline Valves. API Specification 6D is an adoption of ISO 14313: 1999, Petroleum and prediction using
• Insulation Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves. This International Standard specifies TDA
• Material Properties requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, www.TriclinicLabs.com

• Mathematics check, gate and plug valves for application in pipeline systems.
• Mechanics API 526 Premium Flow
• Miscellaneous Flanged Steel Pressure Relief Valves. The standard is a purchase specification for flanged steel pressure Meters
• Physiology relief valves. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated The Best Quality
• Piping Systems pressure relief valves as follows: orifice designation and area; valve size and pressure rating, inlet and outlet; and Customer
• Process Control materials; pressure-temperature limits; and center-to-face dimensions, inlet and outlet. Service in the
• Pumps API 527 World. Get a
• Standards Seat Tightness of Pressure Relief Valves R(2002). Describes methods of determining the seat tightness of Quote.
Organizations metal- and soft-seated pressure relief valves, including those of conventional, bellows, and pilot-operated SierraInstruments.co…

• Steam and designs.

Condensate ANSI/API STD 594
• Thermodynamics Check Valves: Flanged, Lug, Wafer and Butt-welding. API Standard 594 covers design, material, face-to-face Control Valves
• Water Systems dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for two types Providing
of check valves. productivity,
API 598 efficiency and
Ads by Google Valve Inspection and Testing. The standard covers inspection, supplementary examination, and pressure test accurate control!
API Tank requirements for both resilient-seated and metal-to-metal seated gate, globe, plug, ball, check, and butterfly www.armstrongintern…
API ASME Code
valves. Pertains to inspection by the purchaser and to any supplementary examinations the purchaser may
API Ball Valve
require at the valve manufacturer's plant.
API Inspection
API Flanges
ANSI/API 599 Non-Destructive
Metal Plug Valves - Flanged, Threaded and Welding Ends. A purchase specification that covers requirements Testing
ToolBox ShortList for metal plug valves with flanged or butt-welding ends, and ductile iron plug valves with flanged ends, in sizes Eddy Current,
• Add this Page! NPS 1 through NPS 24, which correspond to nominal pipe sizes in ASME B36.10M. Valve bodies conforming Ultrasonic, & Flux
to ASME B16.34 may have flanged end and one butt-welding end. It also covers both lubricated and Leakage
nonlubricated valves that have two-way coaxial ports, and includes requirements for valves fitted with internal Inspection
body, plug, or port linings or applied hard facings on the body, body ports, plug, or plug port. Systems
Search the ToolBox! ANSI/API 600 www.mac-ndt.com
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries - Modified National Adoption of
Translate this ISO 10434:1998.
Page!! API 602 Free Industry
Compact Steel Gate Valves - Flanged, Threaded, Welding, and Extended-Body Ends. The standard covers Magazines
About Us!
threaded-end, socket-welding-end, butt-welding-end, and flanged-end compact carbon steel gate valves in
sizes NPS4 and smaller. Power Engineering
Temperature
ANSI/API 603
0 Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt-Welding Ends. The standard covers
corrosion-resistant bolted bonnet gate valves with flanged or butt-weld ends in sizes NPS 1/2 through 24,
oC corresponding to nominal pipe sizes in ASME B36.10M, and Classes 150, 300, and, 600, as specified in
oF
ASME B16.34.
ANSI/API 607
Fire Test for Soft-Seated Quarter Turn Valves. The standard covers the requirements for testing and
Convert !
evaluating the performance of straightway, soft-seated quarter-turn valves when the valves are exposed to Broadcast
certain fire conditions defined in this standard. The procedures described in this standard apply to all classes Engineering World
Length and sizes of such valves that are made of materials listed in ASME B16.34. Edition
API 609
1 Butterfly Valves: Double Flanged, Lug- and Wafer-Type. The standard covers design, materials, face-to-face
dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for gray iron,
m ductile iron, bronze, steel, nickel-base alloy, or special alloy butterfly valves that provide tight shutoff in the
km closed position and are suitable for flow regulation.
in API 6FA
ft
Specification for Fire Test for Valves. The standard covers the requirements for testing and evaluating the
performance of API Spec 6A and Spec 6D valves when exposed to specifically defined fire conditions.
yards
API 6FC Industrial Laser
miles Fire Test for Valve with Automatic Backseats. The standard covers the requirements for testing and Solutions for
nautical evaluating the performance of API Spec 6A and Spec 6D valves with automatic backseats when exposed to Manufacturing
miles

engineeringtoolbox.com/api-valve-stan… 1/3
4/11/2011 API - Valve Standards
Convert ! specifically defined fire conditions.
API 6RS
Volume Referenced Standards for Committee 6, Standardization of Valves and Wellhead Equipment.
API 11V6
1 Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves. The standard sets
guidelines for continuous flow gas lift installation designs using injection pressure operated valves.
ANSI/API RP 11V7
m3
Recommended Practice for Repair, Testing, and Setting Gas Lift Valves. The standard applies to repair,
liters testing, and setting gas lift valves and reverse flow (check) valves.
in 3 API 520-1
ft3 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries: Part I - Sizing and Selection.
us gal The recommended practice applies to the sizing and selection of pressure relief devices used in refineries
and related industries for equipment that has a maximum allowable working pressure of 15 psig (1.03 bar g or
Convert ! 103 kPa g) or greater.
API 520-2
Velocity Recommended Practice 520: Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries-
Part II, Installation. The recommended practice covers methods of installation for pressure-relief devices for
1 equipment that has a maximum allowable working pressure of 15 psig (1.03 bar g or 103 kPa g) or greater. It
covers gas, vapor, steam, two-phase and incompressible fluid service.
ANSI/API 574
m/s
Inspection Practices for Piping System Components. The standard covers the inspection of piping, tubing,
km/h
valves (other than control valves) and fittings used in petroleum refineries.
ft/min ANSI/API 576
ft/s Inspection of Pressure Relieving Devices. The recommended practice describes the inspection and repair
mph practices for automatic pressure-relieving devices commonly used in the oil and petrochemical industries.
knots
ANSI/API 608
Metal Ball Valves - Flanged and Butt-Welding Ends. The standard covers Class 150 and Class 300 metal ball
Convert ! valves that have either butt-welding or flanged ends and are for use in on-off service.

Sponsored Links
Pressure
Download Direct from ASTM Latest ASTM Standards Available ASTM Standards Online www.astm.org
1
Industrial Strainers Strainer Experts - All Types Fast, Competitive Pricing www.PipingSpecialties.com
Pa (N/m2) High Quality Valves Forged/Cast, Gate, Check, BledSteam Globe, 3Way, Control, P.Slide gate, www.huddersfieldva…
bar
mm H2O
Related Topics
kg/cm2
psi Valve Standards - International standards for valves in piping systems
inches H2O
Sponsored Links
Convert !
Related Documents
Flow
API - American Petroleum Institute - The American Petroleum Institute - API
1 ASME - Valve Standards - An overview of the American Society of Mechanical Engineers - ASME - valve
standards
ASTM - Valve Standards - An overview of ASTM International - American Society for Testing and Materials -
m3/s
valve standards
m3/h
BSi - British Standard Valves - An overview of BSi - British Standard institute valve standards
US gpm Chinese and International Valve Standards - Chinese valve standards compared with the international ISO,
cfm ASTM , ASME, ANSI, MSS, API and JIS standards
DIN - Valve Standards - An overview of DIN - Deutsches Institut f r Normung - valve standards
Convert ! ISO Valve Standards - An overview of International Organization for Standardization - ISO - valve standards
JIS - Valve Standards - Japanese industrial valve standards and specifications from JAS - the Japanese
Unit Converter Standards Association
MSS - Valve Standards - Manufacturers Standardization Society - MSS - of the Valve and Fittings Industry -
Scientific valve standards
SAE Valve Standards - SAE - Society of Automotive Engineers - valve standards
Temperature Pressure ratings Valves - Temperature and pressure ratings of valves according API 6D

Calculator ToolBox Short List

Free Industry Difficult to find your favorite ToolBox page? Add links to your favorite pages in your own personal Short List!
Magazines
• Add this Page! • Delete the ShortList!
Power Engineering
Engineering ToolBox - SketchUp Edition - Online 3D modeling!

Broadcast
Engineering World
Edition Engineering ToolBox - SketchUp Edition - enabled for use with the amazing, fun and free Google SketchUp.

Search the ToolBox

Custom Search
engineeringtoolbox.com/api-valve-stan… 2/3
4/11/2011 API - Valve Standards
Custom Search
Search

Translate the ToolBox

Industrial Laser
Solutions for Arabic - Chinese (Simplified) - Chinese (Traditional) - Dutch - French - German - Italian - Japanese - Korean -
Manufacturing Portuguese - Russian - Spanish

About the ToolBox

We appreciate any comments and tips on how to make The Engineering ToolBox a better information source.
Please contact us by email

[email protected]

if You find any faults, inaccuracies, or otherwise unacceptable information.

The content in The Engineering ToolBox is copyrighted but can be used with NO WARRANTY or LIABILITY.
Important information should always be double checked with alternative sources. All applicable national and local
regulations and practices concerning this aspects must be strictly followed and adhered to.

Advertise in the ToolBox

If you want to promote your products or services in this site - please follow this link.

engineeringtoolbox.com/api-valve-stan… 3/3