Scribd
Upload
617 views

Flange Pad Calcs

This document provides calculations for studding outlet flanges as per pressure vessel design standards. It includes: 1) Design conditions such as design pressure, temperature, material properties and allowable stresses. 2) Details of the gasket and flange faces such as type, dimensions, and calculated loading values. 3) Moment calculations including individual moment components and the total moment value. 4) Calculations for required flange thickness for gasket seating and operating conditions. The minimum required thickness is determined to be 22.948mm which is less than the 42mm pad thickness.

Uploaded by

tom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
617 views

Flange Pad Calcs

This document provides calculations for studding outlet flanges as per pressure vessel design standards. It includes: 1) Design conditions such as design pressure, temperature, material properties and allowable stresses. 2) Details of the gasket and flange faces such as type, dimensions, and calculated loading values. 3) Moment calculations including individual moment components and the total moment value. 4) Calculations for required flange thickness for gasket seating and operating conditions. The minimum required thickness is determined to be 22.948mm which is less than the 42mm pad thickness.

Uploaded by

tom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Studding Outlet Calculations : As Per Pressure Vessel Design Manual, Dennis Moss P173.

Gasket Loads as per PD5500: 2018 + A2 2019 Section 3.8

Design Conditions
Design Pressure(N/mm^2), p 1.76 Allowable Stresses
Design Temperature 60 Flange
Flange Material ASTM A105N Design Temp Sfo 165
Bolting Material BS63693 - 8.8 Amb Temp Sfa 165

Gakset and Facing Details


Gasket type 3.2mm CNAF H = 0.785G^2p 86131.2
Gasket Contact face OD 270 Hg = 6.28bGmp 56068.5
Gasket contact face ID 205 Wm1 = Hg+H 142199.7
N =(o.d - i.d)/2 32.5 Wm2 = 3.14bGy 88459.7
bo = N/2 16.25 Am1 = Wm1/Sb 756.4
b = min,(bo, 2.52bo^0.5) 10.16 Am2 = Wm2/Sa 460.7
G = o.d - 2b 250 Am = Max(Am1; Am2) 756.4
m 2 Ab = Bolt no x root area 1801.6
y 11.1 W = (Ab+Am)Sa/2 245566.2

Moment Calculations
Hd = 3.14B^2P/4 58099 hd = 0.25(A-B) 34.5
Hg = Wm1 - H 56068 hg = 0.25 (C-G) 12.2042223814281
Ht = H-Hd 28033 ht = 0.5(hd+hg) 23.352111190714
Hr = T2Cos(a) 437 hr = T/2 -(t1/2) 17
a = arcsin 0.5(A/R) 13
T2 = 0.5PR( spherical ) 651 Mo = Md + Mg + Mt +/- Mr
T2 = PR (Cylindrical) Mr is (+) if above shell CL, (-) if below

Seating
Hg = W 245566.2 hg = 12.2042223814281

Flange thickness Calculation

Thickness Required; Gasket Seating

𝑇𝑔= √(𝑀𝑜′/𝑆𝑓𝑎𝐵 [𝐴+𝐵]/[𝐴−𝐵] 18.757337644


)

Thickness Requied : Operating

𝐹= (𝑃𝐵√(4𝑅^2−𝐵^2 ))/8𝑆𝑓𝑜(𝐴−𝐵)
2.9031438548

𝐽=𝑀𝑜/𝑆𝑓𝑜𝐵 (𝐴+𝐵)/(𝐴−𝐵) 393.37209095


𝑇𝑜=𝐹+ √(𝐹^2+𝐽) 22.948101704

Therefore 42mm thk pad OK


n Manual, Dennis Moss P173.
9 Section 3.8

lowable Stresses
Bolting
Design Temp Sb 188
Amb Temo, Sa 192

Flange OD, A 343


Flange ID, B 205
Flange PCD C 298.5
Shell Radius, R 740
Shell thickness, t1 8
Flange assumed thk, T 42
Gasket width check
Nmin = AbSa/6.28yG 19.9
OK

Md = Hd x hd 2004405.909
Mg = Hg x hg 684272.06299
Mt = Ht x ht 654618.27774
Mr = Hr x hr 7437.1713526

g + Mt +/- Mr
hell CL, (-) if below 3350733.4211

Mo' = Whg = 2996944.6721


a+b 548
a-b 138
4r2 -b2 2148375

You might also like