Scribd
Upload
187 views3 pages

All Alçi Saten Perdah Alçisi

This document provides safety information for SATEN PERDAH ALÇISI, a gypsum-based finishing plaster produced by FERNAS ALÇI SAN. ve TİC. A.Ş. in Batman, Turkey. It is used as an undercoat for paints and has high adhesion. The product is a powder made of modified calcium sulfate hemihydrates, calcium carbonate, and water retention/retarder agents. Inhalation of the powder can irritate the respiratory tract. Contact with eyes or skin may also cause irritation. Personal protective equipment like dust masks, safety goggles and gloves should be worn when handling the product. When stored properly in a dry place, the plaster

Uploaded by

Agit Sipka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
187 views3 pages

All Alçi Saten Perdah Alçisi

This document provides safety information for SATEN PERDAH ALÇISI, a gypsum-based finishing plaster produced by FERNAS ALÇI SAN. ve TİC. A.Ş. in Batman, Turkey. It is used as an undercoat for paints and has high adhesion. The product is a powder made of modified calcium sulfate hemihydrates, calcium carbonate, and water retention/retarder agents. Inhalation of the powder can irritate the respiratory tract. Contact with eyes or skin may also cause irritation. Personal protective equipment like dust masks, safety goggles and gloves should be worn when handling the product. When stored properly in a dry place, the plaster

Uploaded by

Agit Sipka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MATERIAL SAFETY DATA SHEET

IDENTIFICATION OF THE PRODUCT

Trademark : SATEN PERDAH ALÇISI, Satin Finishing Plaster


Usage : SATEN PERDAH ALÇISI is a gypsum based finishing plaster that is used
as an undercoat of paints, with high adhesion

COMPANY IDENTIFICATION

Manufactured by : FERNAS ALÇI SAN. Ve TİC. A.Ş


Production Site : Siirt Yolu Üzeri 6. km. Organize Sanayi Bölgesi - BATMAN

Telephone : +90.488.213 13 47
Fax : +90.488.213 13 50
e-mail : [email protected]
web page : www.allalci.com

COMPOSITION / INFORMATION ON INGREDIENTS

Composition of ingredients : Modified Calcium Sulphate Hemihydrates


Declaration of ingredients : Calcium carbonate, water retention agents and retarders

PHYSICAL AND CHEMICAL PROPERTIES

Tested in accordance with Turkish Standards TSEN 13279-1 Gypsum Binders & Gypsum Plasters
Thin Coat Plaster - C6 / 20 / 2
Form : Powder
Colour : White to yellowish
Odour : Odourless
Bulk density : 650-850 kg/m3
Vapour pressure : not applicable
Solubility in water : Soluble
pH value : 8
Flash point : not applicable
Ignition temperature : not applicable
Explosive limits : not applicable

1
Siirt Yolu Üzeri 6. km. Organize Sanayi Bölgesi - BATMAN
+90.488.213 13 47 +90.488.213 13 50 [email protected] www.allalci.com
HAZARDS IDENTIFICATION

Inhalation : Inhalation of powder plasters for a long time may cause irritation in the
respiratory tract.
Ingestion : Avoid ingestion.
Eye contact : Powder plasters may irritate eyes. Avoid contact with eyes.
Skin contact : Powder plaster and mortar may cause dry skin and/or allergic dermatitis.
Avoid direct contact with skin.

FIRST AID MEASURES

After inhalation : Remove to fresh air.


After ingestion : Rinse mouth, drink plenty of water.
After eye contact : Immediately flush eyes with copious amounts of running water.
After skin contact : Rinse with running water and soap. Use proper skin care lotions.

Medical assistance must be taken if the problem continues despite actions listed above.

EXPOSURE CONTROLS / PERSONAL PROTECTION

Respiratory protection : There must be a sufficient circulation of air in the work area. Otherwise use
suitable dust mask (comply with TS EN 149).
Eye protection : Use safety goggles (comply with EN 166).
Hand protection : Use suitable safety gloves.
Body protection : Use sealed work clothes with long sleeves.

FIRE FIGHTING MEASURES

Fire Class : A1 - Non combustible Structural material (According to TS EN 13279-1)


Packaging : Laminated Polypropylene bag - Flammable
Extinguish the fire : Fire extinguishers and standard fire extinguishing methods are sufficient

2
Siirt Yolu Üzeri 6. km. Organize Sanayi Bölgesi - BATMAN
+90.488.213 13 47 +90.488.213 13 50 [email protected] www.allalci.com
ACCIDENTAL RELEASE MEASURES

• Powder plaster and mortar must be prevented from infiltrating into soil, rivers, lakes and waste water
drains.
• Collect up dry; becomes slippery on contact with water.

HANDLING AND STORAGE

• It is recommended to use the product within 6 months after the date of production.
• Bags should be stored on pallets in closed, dry and moisture-free places.
• Bags should not be stacked in more than 20 layers (to prevent collapse).
• Poor and over-long storage will spoil the properties of the product.
• Forklifts should be used for carrying heavy loads (products in bigbags, slingbags and on palettes etc.)
Forklifts must have sufficient capacity. Forklift operators must have license and experience.

STABILITY AND REACTIVITY

Thermal decomposition : > 800 0C


Hazardous decomposition products : Stable product. Gives an exothermic reaction with water and
will show basic (alkaline) behavior. Does not react with
common materials such as oxygen (in air) etc.
Hazardous reactions : Does not react to building materials which are used together.

TOXICOLOGICAL INFORMATION

Inhalation of powder plasters may cause short term irritation in the respiratory tract. Continuous contact
doesn’t show toxicological behaviour but may cause dry skin and/or allergic dermatitis.

ECOLOGICAL INFORMATION

No known side effect.

DISPOSAL CONSIDERATIONS

The user is responsible for disposing waste material. Disposal should be made in accordance with state and
local regulations. Users must keep abreast of and comply with current regulations.

The purpose of this Material Safety Data Sheet is to describe the products in terms of their safety
requirements. The data given here is based on current knowledge and experience of FERNAS ALÇI SAN. ve
TİC. A.Ş

3
Siirt Yolu Üzeri 6. km. Organize Sanayi Bölgesi - BATMAN
+90.488.213 13 47 +90.488.213 13 50 [email protected] www.allalci.com

You might also like