Scribd
Upload
95 views2 pages

HSI Electric Brochure

This document provides information about HSI electric boilers manufactured by Vapor Power International. The boilers are designed to generate hot water and steam using electricity as fuel. They are available for heating or heating and process applications from 30 to 4320 kW, and operate at voltages from 208 to 600 volts. Key advantages of HSI electric boilers include being clean, automatic, safe, compact, and efficient at 99% regardless of output. They are constructed to ASME, NEC, and UL standards. Controls include a proportioning step control and optional features are also available. Heating elements use Incoloy sheathing around high grade resistance wire to ensure long life. A five year guarantee is provided on pressure vessels.

Uploaded by

MannyBaldonadoDeJesus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views2 pages

HSI Electric Brochure

This document provides information about HSI electric boilers manufactured by Vapor Power International. The boilers are designed to generate hot water and steam using electricity as fuel. They are available for heating or heating and process applications from 30 to 4320 kW, and operate at voltages from 208 to 600 volts. Key advantages of HSI electric boilers include being clean, automatic, safe, compact, and efficient at 99% regardless of output. They are constructed to ASME, NEC, and UL standards. Controls include a proportioning step control and optional features are also available. Heating elements use Incoloy sheathing around high grade resistance wire to ensure long life. A five year guarantee is provided on pressure vessels.

Uploaded by

MannyBaldonadoDeJesus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Bulletin 300

1/09

HSI
HS I Electric B o i l e rs –

Moderate Watt Density (70 WPSI)


R e s i s t a n c e E l e m e n t Ty p e

Designed and built to fully utilize the advantages of


generating hot water and steam using electricity as the fuel.

for Heating: for Heating & Process:


HOT WATER BOILERS STEAM BOILERS
30 to 4320 KW 30 to 4320 KW
30 – 415 psi 15 – 2500 psi
208 – 600 volts 208 – 600 volts
HSI
HSI Electric Boilers Offer
THESE ADVANTAGES... NO FLAME I NO SOOT I NO FLUES I NO STACKS I NO FUEL PUMPS
CLEAN – No air pollution
AUTOMATIC – Require little supervision or maintenance
SAFE – Completely insulated, no flame
FOR THESE APPLICATIONS...
Office Buildings • Hospitals and Schools
Apartments, Hotels and Motels • Industrial Plants
Restaurants and Food Processing • Laboratories
COMPACT – No boiler house required, take less space
EFFICIENT – 99% regardless of output Clothing and Textiles • Auxiliary Steam Supply

ALL HSI ‘RESISTO-FLO’ HOT WATER AND STEAM REFERENCE DATA


BOILERS ARE CONSTRUCTED TO THE LATEST 10KW = 1.02 BHP = 34 Lbs. Stm/Hr = 34,120 BTU/hr
ASME, NEC AND U/L STANDARDS, COMBINING 1 Gal Water at 62° F = 8.34 Lbs.
THE BETTER IDEAS FOUND IN COMPETITIVE 1 Cu Ft Water at 62° F = 62.4 Lbs.
1 Cu Ft = 7.48 Gal
MODELS WITH SEVERAL NEW AND UNIQUE 1 Ft Water = 0.435 psi
FEATURES AS DESCRIBED BELOW: KW = GPH x T (°F)/410 = LPH x T (°C)/862
Amps (3ph) = Watts/(Volts x 1.73)
CONTROLS: Enthalpy of water = Temp (°F) -32 BTU/LB
A proportioning step control is provided as standard on boilers of 3 or more
steps. A proportional temperature sensor (hot water) or pressure sensor Saturated Steam: Pressure vs Temperature
(steam) provides input to the modulating solid-state step control which, in 0 psig = 0 KPa = 212°F 125 psig = 862 KPa = 353°F
turn, energizes the required heating circuits via magnetic contactors. The 8 psig = 55 KPa = 235°F 150 psig = 1034 KPa = 366°F
step controls are field selectable between linear sequence and progressive 15 psig = 103 KPa = 250°F 200 psig = 1379 KPa = 388°F
sequence (first-on/first-off) and automatically recycle to zero output upon 30 psig = 207 KPa = 274°F 225 psig = 1551 KPa = 397°F
startup and restart. These state-of-the-art controls also include adjustable 50 psig = 345 KPa = 298°F 250 psig = 1724 KPa = 406°F
interstage time delays, as well as the capability to slave vernier SCR stages. 80 psig = 552 KPa = 324°F 300 psig = 2068 KPa = 422°F
100 psig = 690 KPa = 338°F 350 psig = 2413 KPa = 436°F
OPTIONAL FEATURES:
Auxiliary LWCO Auto Blowdown (Steam) NOTE: In pursuing our policy of continuous development, we reserve the right to vary
any detail shown in this bulletin without notice.
Load Limiter Conductivity Control
Outdoor Reset Alarm Circuit NOTE: Consult local representative or Factory for other Vapor/HSI products, including:
Electric (resistance element) steam and hot water boilers
Door Interlock Ammeter
Condensate return systems
Disconnect Switch Voltmeter Thermal fluid heaters
Circuit Breaker Flow Switch (Hot Water) Circulation heaters
Ground Fault Detection BAS/DCS Interface Superheaters

GUARANTEE
HEATING ELEMENTS:
Vapor/HSI guarantees all components, except pilot lights, fuses, gaskets
and mechanical seals, if found defective in workmanship or material while
under normal use and service within the first year of operation or until
18 months after shipment from the Factory, whichever occurs first, after
authorized return by purchaser to Vapor/HSI (at purchaser’s expense) and
after examination discloses to Vapor/HSI’s reasonable satisfaction to be
The Incoloy-sheathed immersion resistance-type heating elements used for defective. The repair or replacement of defective parts will be made by HSI
boilers in this bulletin have moderate watt densities (70 wpsi) to insure long without charge. The pressure vessel, however, is guaranteed for 5 years after
life. The elements are constructed of high grade resistance wire (80% nickel, shipment. Vapor/HSI shall not be held responsible for any field charges in
20% chromium) surrounded by compacted magnesium oxide in Incoloy 800 connection with the removal or replacement of allegedly defective parts, nor
(SS 332) sheathing. HSI hairpin elements have unique fold-back design with for incidental or consequential damages. This guarantee does not include
repressed bends. This configuration affords ideal spacing between sections failure resulting from unsuitable water.
of individual elements and between adjacent elements thus allowing
maximum water flow and heat dissipation. Special compression fittings
permit elements to be individually replaced with standard tools.
Manufactured by:

Vapor Power International, LLC


551 S. County Line Road
Franklin Park, IL 60131
www.vaporpower.com

You might also like