SUMMARY OF CHANGES

The 2007 Edition of this Code contains revisions in addition to the 2004 Edition with 2005 and
2006 Addenda. The revisions are identified with the designation 07 in the margin and, as described
in the Foreword, become mandatory six months after the publication date of the 2007 Edition.
To invoke these revisions before their mandatory date, use the designation “2007 Edition” in
documentation required by this Code. If you choose not to invoke these revisions before their
mandatory date, use the designation “2004 Edition through the 2006 Addenda” in documentation
required by this Code.

The BC numbers listed below are explained in more detail in “List of Changes in BC Order”
following this Summary of Changes.

--``,,`,,`,``,`,`,,``,```,,,,,-`-`,,`,,`,`,,`---
Changes given below are identified on the pages by a margin note, 07, placed next to the
affected area.
Page Location Change (BC Number)
2 TG-130 (1) ADR 2003 and Code of Federal
Regulations references moved from
TG-130.2 to TG-130.1 (BC06-280)
(2) ASME PTC 25, ASME QAI-1, and
ANSI/NB-23 references updated
(BC06-280)
8 TG-410 Definitions of Certified Individual (CI) and
Qualified Inspector (QI) revised
(BC05-1549)
15 Table TM-130.2-1 Specification SA-562 deleted (BC06-978)
18 Table TM-130.2-2 “SA-336” revised to read “SA-965”
(BC00-433)
25 Table TM-130.2-3 SB-928 added (BC03-902, BC04-1010)
174 TS-200.5(f) First sentence revised (BC06-281)
179 TP-200(a) First sentence revised (BC06-1019)
185–215 Modal Appendix 1 Added (BC06-542)
243–248 Mandatory Appendix VIII Added (BC03-1393)
255 Mandatory Appendix XIII Added per reference in Modal
Appendix 1 (BC06-542)

xxix
Copyright ASME International
Provided by IHS under license with ASME Licensee=Fluor Corp no FPPPV per administrator /2110503106, User=Mendez, Fernan
No reproduction or networking permitted without license from IHS Not for Resale, 01/24/2008 11:40:30 MST
 LIST OF CHANGES IN BC ORDER

BC Number Change

BC00-433 Changed references from SA-336 to SA-965 for stainless steel forgings.
BC03-1393 Added new Appendix VIII to Section XII.
BC04-1010 Added SB-928 UNS A95083, A95086, and A95456 into Table TM-130.2-3.
BC05-1549 Identified that the requirements for Qualified Inspectors are located in Part 6, and the requirements
for Certified Individuals are located in Part 8 of the 2005 edition of QAI-1.
BC06-280 Revised TG-130 with regard to normative and informative references; updated reference dates.
BC06-281 Clarified TS-200.5(f) with regard to acceptance of changes in Quality Control System.
BC06-542 Added new Modal Appendix 1 to Section XII.
BC06-978 Deleted SA-562 from Table TM-130.2-1.
BC06-1019 Change “R” Certificate of Authorization to “TR” in TP-200.

--``,,`,,`,``,`,`,,``,```,,,,,-`-`,,`,,`,`,,`---

xxx
Copyright ASME International
Provided by IHS under license with ASME Licensee=Fluor Corp no FPPPV per administrator /2110503106, User=Mendez, Fernan
No reproduction or networking permitted without license from IHS Not for Resale, 01/24/2008 11:40:30 MST