Scribd
Upload
162 views

VHF Vcs Network Diagram

This document proposes a VHF network configuration with the following key elements: 1. A main VCS system with a main VHF transmitter/receiver and main VCS rack. 2. A standby VCS system with a standby VHF transmitter/receiver and standby VCS rack. These would form separate physical/logical networks. 3. A separate physical/logical network for S4 controllers with dedicated local and remote VHF transmit/receive equipment.

Uploaded by

Sibashis Mondal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views

VHF Vcs Network Diagram

This document proposes a VHF network configuration with the following key elements: 1. A main VCS system with a main VHF transmitter/receiver and main VCS rack. 2. A standby VCS system with a standby VHF transmitter/receiver and standby VCS rack. These would form separate physical/logical networks. 3. A separate physical/logical network for S4 controllers with dedicated local and remote VHF transmit/receive equipment.

Uploaded by

Sibashis Mondal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REMOTE STATION MPLS CLOUD RAILTAIL PROPOSED VCS VHF NETWORK CONFIGURATION

MPLS ROUTER MPLS ROUTER MPLS CLOUD BSNL


RAILTAIL REMOTE BSNL REMOTE

ETHERNET SW ETHERNET SW MPLS ROUTER-1 MPLS ROUTER


(LAN-1) (LAN-2) BSNL LOCAL RAILTAIL LOCAL LOCAL TX/RX LOCAL TX/RX
DEDICATED DEDICATED
MAIN STANDBY
REMOTE REMOTE REMOTE REMOTE
TX/RX TX/RX
TX/RX TX/RX DEDICATED DEDICATED
MAIN STD BY MAIN STD BY

ETHERNET ETHERNET
ETHERNET SW SW
(LAN-5) (LAN-6)
ETHERNET VCS SW VHF
SW ETHERNET VCS (LAN-4) TX/RX
MAIN SW ETHERNET
S4 S4
(LAN-1) STDBY
RACK (LAN-2) SW STDBY VCS VCS
VCS MAIN VCS MAIN (LAN-3) RACK STDBY
VCS
STDBY

VHF
TX/RX
MAIN VCS CONTROLLER S4 CONTROLLER

VCS CONTROLLER WORKING POSITION(ACC/APP/TWR) KOLKATA

1. It is proposed here to have two VCS systems, Main and Std By. One for main VHF TX/RX and the other for STD BY VHF TX/RX. There will be two complete separate
physical/logical networks, one for main VHF TX/RX with MAIN VCS RACK (marked in red) and the other for STD BY VHF TX/RX with STD BY VCS RACK (marked in
green).
2. There will be a completely separate third physical/logical network for S4(Standalone) controllers with dedicated local and remote VHF TX/RX (marked in purple).

THE FALL BACK VCS MAY NOT BE REQUIRED

Prepared by Sibashis Mondal, JGM(CNS)

You might also like