IMPACT SOCKETS & SLUGGING WRENCHES

www.impactsocket.com
 IMPACT SOCKETS, ACCESSORIES AND SOCKET SETS
Standard, Deep and Thinwall Sockets
Up to 3.1/2" square drive Impact Sockets through to 235MM (9.1/8") across the flats
# 5 spline drive to 80mm (4") across the flats
Wide variety of Accessories

Freecorner PROFILE
The Freecorner profile is provided on the square drives as well as on the hexagon end of Impact Sockets
1/2" square drive and above.

CONVENTIONAL PROFILE FREECORNER PROFILE

Corner point contact high Highlights show contact Distributed surface loads Highlights show contact
stress areas points on the corner of the relieves possible stress points away from the
fastener area corner of the fastener

The benefits of the Freecorner profile include are

Reduced risk of fastener rounding.
Increased chances of turning worn fasteners.
Elimination of high stress concentration points increasing the impact resistance and the torque
transmitting capability.

'POWERMASTER' IMPACT SOCKETS

‘POWERMASTER' Impact Sockets of 1/2" square drive and above feature freecorner for flats above 17 mm (5/8").
All Impact Sockets are made from high strength alloy steel.
All Impact Sockets are heat treated for the best combination of strength and impact resistance.
All Impact Sockets have an optimum wall thickness for strength and access on fasteners having restrictions.
The depth of the Hex openings is designed to accomodate the full standard fastener head.
All Impact Sockets have chamfered openings for ease in engagement with the drive tool and the fastener.
Concentric openings and large clearance holes to meet industrial specifications.
All Impact Sockets have a Ring-N-Pin arrangement for securing them to the drive.
Sockets are plated and black oxidized coated for increased protection from rusting.

SAFETY NOTICE
Sockets in this catalog are designed for impact use. Always use safety goggles when using impact
equipment.
 3/8” SQUARE DRIVE IMPACT SOCKETS PAGE 4

POWERMASTER
1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 6

3/4” SQUARE DRIVE IMPACT SOCKETS PAGE 9

1” SQUARE DRIVE IMPACT SOCKETS PAGE 13

1.1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 19

2.1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 22

3.1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 25

# 5 SPLINE DRIVE IMPACT SOCKETS PAGE 26

CASTELLATED SOCKETS PAGE 29

STRAIGHT SLUGGING WRENCHES METRIC & SAE PAGE 31

OFFSET SLUGGING WRENCHES METRIC & SAE PAGE 33

OPEN JAW SLUGGING WRENCHES PAGE 34

BOX BI-HEX SLUGGING WRENCHES PAGE 35

STRUCTURAL WRENCHES PAGE 36

INSERT SOCKETS PAGE 38

TURBINE TOOLS PAGE 39

POWERMASTER WARRANTY
The Powermaster warranty will replace free to the
original purchaser any qualifying socket found to be
defective in either material or workmanship, indicated
by premature wear or breakage. Determination of free
replacement will be done by your Powermaster
distributor. Impact Sockets, by nature of their
application are subject to extreme stresses, therefore
special application sockets such as thinwall, hex
driver, accessories and slugging wrenches are
specifically excluded from the replacement warranty.
 T
A/F A/F

IMPACT SOCKETS D1 D2

3 “
8 C
OAL
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
8 S-06M8 14.0 19.0 6.0 14.0 25.5 0.030 5/16 S-0605 0.550 0.747 0.236 0.530 1.002 0.067
9 S-06M9 15.0 19.0 7.0 14.0 25.5 0.031 3/8 S-0606 0.629 0.747 0.275 0.530 1.002 0.070
10 S-06M10 16.0 19.0 7.0 14.0 25.5 0.032 7/16 S-0607 0.668 0.747 0.314 0.530 1.002 0.072
11 S-06M11 17.0 19.0 8.0 14.0 25.5 0.033 1/2 S-0608 0.786 0.786 0.354 0.530 1.002 0.089
12 S-06M12 19.0 19.0 9.0 14.0 25.5 0.036 9/16 S-0609 0.864 0.864 0.393 0.707 1.179 0.130
13 S-06M13 20.0 20.0 9.0 14.0 25.5 0.041 5/8 S-0610 0.943 0.864 0.393 0.707 1.179 0.144
14 S-06M14 21.0 21.0 10.0 18.0 30.0 0.053
11/16 S-0611 1.022 0.864 0.472 0.707 1.179 0.168
15 S-06M15 22.0 22.0 10.0 18.0 30.0 0.059
3/4 S-0612 1.061 0.864 0.472 0.707 1.179 0.181
16 S-06M16 24.0 22.0 10.0 18.0 30.0 0.066
17 S-06M17 25.0 22.0 12.0 18.0 30.0 0.072
13/16 S-0613 1.179 0.864 0.472 0.707 1.179 0.218
18 S-06M18 26.0 22.0 12.0 18.0 30.0 0.077
7/8 S-0614 1.218 0.864 0.511 0.707 1.179 0.233
19 S-06M19 27.0 22.0 12.0 18.0 30.0 0.082
20 S-06M20 29.0 22.0 12.0 18.0 30.0 0.094
21 S-06M21 30.0 22.0 12.0 18.0 30.0 0.099
22 S-06M22 31.0 22.0 13.0 18.0 30.0 0.106

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
8 S-06M8L 14.0 19.0 6.0 42.0 54.0 0.055 5/16 S-0605L 0.550 0.747 0.236 1.650 2.122 0.122
9 S-06M9L 15.0 19.0 7.0 42.0 54.0 0.058 3/8 S-0606L 0.629 0.747 0.275 1.650 2.122 0.135
10 S-06M10L 16.0 19.0 7.0 42.0 54.0 0.062 7/16 S-0607L 0.668 0.747 0.314 1.650 2.122 0.141
11 S-06M11L 17.0 19.0 8.0 42.0 54.0 0.064 1/2 S-0608L 0.786 0.786 0.354 1.650 2.122 0.184
12 S-06M12L 19.0 19.0 9.0 42.0 54.0 0.076 9/16 S-0609L 0.864 0.864 0.393 1.886 2.358 0.243
13 S-06M13L 20.0 20.0 9.0 42.0 54.0 0.084 5/8 S-0610L 0.944 0.866 0.433 1.811 2.362 0.265
14 S-06M14L 21.0 21.0 10.0 48.0 60.0 0.101 11/16 S-0611L 1.179 0.866 0.472 2.047 2.598 0.365
15 S-06M15L 22.0 22.0 10.0 48.0 60.0 0.110 3/4 S-0612L 1.061 0.864 0.472 1.886 2.358 0.339
17 S-06M17L 25.0 22.0 12.0 48.0 60.0 0.139 13/16 S-0613L 1.179 0.864 0.472 2.122 2.593 0.334
19 S-06M19L 27.0 22.0 12.0 48.0 60.0 0.154 7/8 S-0614L 1.218 0.864 0.511 2.122 2.593 0.348

METRIC BIHEXAGON FRACTIONAL BIHEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
8 06M8DH 14.0 19.0 6.0 14.0 25.5 0.030 3/8 0606DH 0.629 0.747 0.275 0.530 1.002 0.070
9 06M9DH 15.0 19.0 7.0 14.0 25.5 0.031 7/16 0607DH 0.668 0.747 0.314 0.530 1.002 0.072
10 06M10DH 16.0 19.0 7.0 14.0 25.5 0.032 1/2 0608DH 0.786 0.786 0.354 0.530 1.002 0.089
11 06M11DH 17.0 19.0 8.0 14.0 25.5 0.033 9/16 0609DH 0.864 0.864 0.393 0.707 1.179 0.130
12 06M12DH 19.0 19.0 9.0 14.0 25.5 0.036 5/8 0610DH 0.943 0.864 0.393 0.707 1.179 0.144
13 06M13DH 20.0 20.0 9.0 14.0 25.5 0.041 11/16 0611DH 1.022 0.864 0.472 0.707 1.179 0.168
14 06M14DH 21.0 21.0 10.0 18.0 30.0 0.053 3/4 0612DH 1.061 0.864 0.472 0.707 1.179 0.181
15 06M15DH 22.0 22.0 10.0 18.0 30.0 0.059 13/16 0613DH 1.179 0.864 0.472 0.707 1.179 0.218
16 06M16DH 24.0 22.0 10.0 18.0 30.0 0.066 7/8 0614DH 1.218 0.864 0.511 0.707 1.179 0.233
17 06M17DH 25.0 22.0 12.0 18.0 30.0 0.072
18 06M18DH 26.0 22.0 12.0 18.0 30.0 0.077
19 06M19DH 27.0 22.0 12.0 18.0 30.0 0.082
20 06M20DH 29.0 22.0 12.0 18.0 30.0 0.094
21 06M21DH 30.0 22.0 12.0 18.0 30.0 0.099
22 06M22DH 31.0 22.0 13.0 18.0 30.0 0.106
 IMPACT SOCKETS THINWALL
3 “
8
METRIC HEXAGON FRACTIONAL HEXAGON
A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
8 S-06M8T 12.3 19.0 6.0 14.0 25.5 0.028 5/16 S-0605T 0.484 0.748 0.236 0.531 1.004 0.061
10 S-06M10T 14.8 19.0 7.0 14.0 25.5 0.030 3/8 S-0606T 0.551 0.748 0.236 0.531 1.004 0.065
11 S-06M11T 16.1 19.0 8.0 14.0 25.5 0.031 7/16 S-0607T 0.634 0.748 0.315 0.531 1.004 0.068
13 S-06M13T 18.6 19.0 9.0 14.0 25.5 0.035 1/2 S-0608T 0.732 0.748 0.354 0.531 1.004 0.077
17 S-06M17T 23.7 22.0 12.0 18.0 30.0 0.069 9/16 S-0609T 0.787 0.787 0.394 0.531 1.004 0.088
19 S-06M19T 26.3 22.0 12.0 18.0 30.0 0.081 5/8 S-0610T 0.866 0.866 0.394 0.709 1.181 0.138

Thinwall Deep Hexagon Sockets available on request.

IMPACT ACCESSORIES
METRIC HEX DRIVER SOCKETS FRACTIONAL HEX DRIVER SOCKETS
HEX A/F MODEL BIT OAL Wt. HEX A/F MODEL BIT OAL Wt.
MM NO. LENGTH mm Kg. SAE NO. LENGTH inch lbs.
4 06M04H 15.0 45.0 0.035 5/32 06005H 0.590 1.771 0.080
5 06M05H 15.0 45.0 0.035 3/16 0603H 0.590 1.771 0.080
6 06M06H 15.0 45.0 0.035 7/32 06007H 0.590 1.771 0.080
1/4 0604H 0.590 1.771 0.080
8 06M08H 15.0 45.0 0.045
5/16 0605H 0.590 1.771 0.090
10 06M10H 15.0 45.0 0.050
3/8 0606H 0.590 1.771 0.110

REGULAR EXTENSIONS
OAL MODEL SHANK DIA HEAD DIA Wt.
mm NO. mm (inch) mm (inch) Kg. (lbs.)
75 (3") E0603 0.09 (0.20)
150 (6") E0606 13.0 (0.511) 22.0 (0.866) 0.16 (0.35)
300 (12") E0612 0.35 (0.77)

SQUARE ADAPTORS
MODEL HEAD DIA OAL Wt.
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)

3/8" F X 1/2" M A0608 35.0 (1.377) 0.07 (0.15)

22.0 (0.866)
3/8" F X 1/4" M A0606 32.0 (1.259) 0.05 (0.11)

UNIVERSAL JOINT
SQUARE MODEL DIA OAL Wt.
DRIVE NO. mm (inch) mm (inch) Kg. (lbs.)

3/8" U0606 22.0 (0.866) 52.0 (2.047) 0.12 (0.27)

DOUBLE MALE EXTENSIONS

OAL MODEL SHANK DIA HEAD DIA Wt.
mm NO. mm (inch) mm (inch) Kg. (lbs.)
75 (3") S0603 0.06 (0.13)
125 (5") S0605 13.0 (0.511) 9.3 (0.366) 0.12 (0.26)
250 (10") S0610 0.30 (0.66)

DOUBLE FEMALE ADAPTORS

MODEL HEAD DIA OAL Wt.
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)

3/8" F X 1/2" F AN0608 38.0 (1.496) 0.09 (0.20)

22.0 (0.866)
3/8" F X 3/8" F AN0606 35.0 (1.377) 0.07 (0.15)
 T
A/F A/F

IMPACT SOCKETS D1 D2

1 “
2 C
OAL
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
8 S-08M8 15.0 25.0 6.0 15.0 32.0 0.060 3/8 S-0806 0.669 0.984 0.315 0.591 1.260 0.132
9 S-08M9 16.0 25.0 7.0 15.0 32.0 0.060 7/16 S-0807 0.748 0.984 0.354 0.669 1.339 0.148
10 S-08M10 17.0 25.0 8.0 15.0 32.0 0.060 1/2 S-0808 0.827 0.984 0.394 0.709 1.378 0.160
11 S-08M11 19.0 25.0 9.0 17.0 34.0 0.067 9/16 S-0809 0.945 0.984 0.433 0.709 1.378 0.181
12 S-08M12 20.0 25.0 9.0 17.0 34.0 0.069 5/8 S-0810 0.984 0.984 0.433 0.709 1.378 0.188
13 S-08M13 21.0 25.0 10.0 18.0 35.0 0.073 11/16 S-0811 1.063 1.063 0.512 0.787 1.457 0.240
14 S-08M14 22.0 25.0 10.0 18.0 35.0 0.076 3/4 S-0812 1.142 1.142 0.551 0.866 1.535 0.301
15 S-08M15 24.0 25.0 11.0 18.0 35.0 0.082 13/16 S-0813 1.220 1.181 0.551 0.866 1.535 0.341
16 S-08M16 25.0 25.0 11.0 18.0 35.0 0.085 7/8 S-0814 1.339 1.181 0.591 0.984 1.654 0.423
17 S-08M17 26.0 26.0 12.0 20.0 37.0 0.099 15/16 S-0815 1.378 1.181 0.591 0.984 1.654 0.440
18 S-08M18 27.0 27.0 13.0 20.0 37.0 0.109 1 S-0816 1.457 1.181 0.630 1.024 1.693 0.480
19 S-08M19 29.0 29.0 14.0 22.0 39.0 0.137 1.1/16 S-0817 1.535 1.181 0.630 1.024 1.693 0.519
21 S-08M21 31.0 30.0 14.0 22.0 39.0 0.155 1.1/8 S-0818 1.654 1.181 0.669 1.063 1.732 0.575
22 S-08M22 32.0 30.0 14.0 22.0 39.0 0.162 1.3/16 S-0819 1.672 1.732 0.709 1.102 1.772 0.813
23 S-08M23 34.0 30.0 15.0 25.0 42.0 0.192 1.1/4 S-0820 1.772 1.732 0.709 1.102 1.772 0.963
24 S-08M24 35.0 30.0 15.0 25.0 42.0 0.200
1.5/16 S-0821 1.862 1.732 0.709 1.102 1.772 1.083
25 S-08M25 36.0 30.0 16.0 26.0 43.0 0.211
1.3/8 S-0822 1.869 1.732 0.787 1.181 1.850 1.088
26 S-08M26 37.0 30.0 16.0 26.0 43.0 0.218
27 S-08M27 39.0 30.0 16.0 26.0 43.0 0.236
1.7/16 S-0823 1.968 1.732 0.866 1.220 1.889 1.210
28 S-08M28 40.0 30.0 17.0 27.0 44.0 0.250
1.1/2 S-0824 2.086 1.732 0.866 1.338 2.007 1.255
30 S-08M30 42.0 30.0 17.0 27.0 44.0 0.261
32 S-08M32 45.0 44.0 18.0 28.0 45.0 0.415
36 S-08M36 50.0 44.0 20.0 30.0 47.0 0.495

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
8 S-08M8L 15.0 25.0 6.0 63.0 80.0 0.112 3/8 S-0806L 0.669 0.984 0.315 2.480 3.150 0.270
9 S-08M9L 16.0 25.0 7.0 63.0 80.0 0.117 7/16 S-0807L 0.748 0.984 0.354 2.480 3.150 0.310
10 S-08M10L 17.0 25.0 8.0 63.0 80.0 0.122 1/2 S-0808L 0.827 0.984 0.394 2.480 3.150 0.340
11 S-08M11L 19.0 25.0 9.0 63.0 80.0 0.142 9/16 S-0809L 0.945 0.984 0.433 2.480 3.150 0.400
12 S-08M12L 20.0 25.0 9.0 63.0 80.0 0.149 5/8 S-0810L 0.984 0.984 0.433 2.480 3.150 0.420
13 S-08M13L 21.0 25.0 10.0 63.0 80.0 0.156 11/16 S-0811L 1.063 1.063 0.512 2.480 3.150 0.490
14 S-08M14L 22.0 25.0 10.0 63.0 80.0 0.160 3/4 S-0812L 1.142 1.142 0.551 2.480 3.150 0.580
15 S-08M15L 24.0 25.0 11.0 63.0 80.0 0.184 13/16 S-0813L 1.220 1.181 0.551 2.480 3.150 0.650
16 S-08M16L 25.0 25.0 11.0 63.0 80.0 0.192 7/8 S-0814L 1.339 1.181 0.591 2.677 3.346 0.830
17 S-08M17L 26.0 26.0 12.0 63.0 80.0 0.207 15/16 S-0815L 1.378 1.181 0.591 2.677 3.346 0.860
18 S-08M18L 27.0 27.0 13.0 63.0 80.0 0.222 1 S-0816L 1.457 1.181 0.630 2.677 3.346 0.910
19 S-08M19L 29.0 29.0 14.0 63.0 80.0 0.264 1.1/16 S-0817L 1.535 1.181 0.630 2.677 3.346 1.010
21 S-08M21L 31.0 30.0 14.0 63.0 80.0 0.297 1.1/8 S-0818L 1.654 1.181 0.669 2.677 3.346 1.100
22 S-08M22L 32.0 30.0 14.0 68.0 85.0 0.333 1.3/16 S-0819L 1.672 1.732 0.709 2.677 3.346 1.500
23 S-08M23L 34.0 30.0 15.0 68.0 85.0 0.375 1.1/4 S-0820L 1.772 1.732 0.709 2.677 3.346 1.500
24 S-08M24L 35.0 30.0 15.0 68.0 85.0 0.389
1.5/16 S-0821L 1.819 1.682 0.787 2.677 3.346 1.560
25 S-08M25L 36.0 30.0 16.0 68.0 85.0 0.403
1.3/8 S-0822L 1.869 1.732 0.787 2.677 3.346 1.760
26 S-08M26L 37.0 30.0 16.0 68.0 85.0 0.415
27 S-08M27L 39.0 30.0 16.0 68.0 85.0 0.459
1.7/16 S-0823L 1.968 1.732 0.866 2.676 3.346 1.870
28 S-08M28L 40.0 30.0 17.0 68.0 85.0 0.476
1.1/2 S-0824L 1.209 1.732 0.866 2.676 3.346 1.910
30 S-08M30L 42.0 30.0 17.0 68.0 85.0 0.501
32 S-08M32L 45.0 44.0 18.0 68.0 85.0 0.684
36 S-08M36L 50.0 44.0 20.0 68.0 85.0 0.799
 IMPACT SOCKET SETS
1 “
2

METRIC SIZE FRACTIONAL SIZE

MODEL MODEL
QTY. SOCKET A/F QTY. SOCKET A/F
NO. NO.
11 PIECES 1/2,9/16,5/8,3/4,13/16,7/8,15/16,1,
S-08M51 13 PIECES 8,9,10,11,12,13,14,15,16,17,18,19,21 S-0851
+ UJOINT 1.1/16,1.1/8,U-JOINT
10,11,12,13,14,15,16,17,18,19,20, 7/16,1/2,9/16,5/8,11/16,3/4,13/16,
S-08M52 16 PIECES S-0852 13 PIECES
21,22,23,24,27 7/8,15/16,1,1.1/16,1.1/8,1.3/4
S-08M53 6 PIECES 13,14,15,16,17,18 S-0853 7 PIECES 7/16,1/2,9/16,5/8,11/16,3/4,13/16
16 PIECES 10,11,12,13,14,15,16,17,18,19,20,21, 14 PIECES 3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16,
S-08LM51 S-08L51
DEEP 22,23,24,27 DEEP 7/8,15/16,1,1.1/16,1.1/8,1.1/4
12 PIECES 7 PIECES
S-08LM52 10,11,12,13,14,15,16,17,18,19,20,21 S-08L52 7/16,1/2,9/16,5/8,11/16,3/4,13/16
DEEP DEEP

IMPACT SOCKETS

METRIC BIHEXAGON FRACTIONAL BIHEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
8 08M8DH 15.0 25.0 6.0 15.0 32.0 0.060 7/16 0807DH 0.748 0.984 0.354 0.669 1.339 0.148
9 08M9DH 16.0 25.0 7.0 15.0 32.0 0.060 1/2 0808DH 0.827 0.984 0.394 0.709 1.378 0.160
10 08M10DH 17.0 25.0 8.0 15.0 32.0 0.060 9/16 0809DH 0.945 0.984 0.433 0.709 1.378 0.181
11 08M11DH 19.0 25.0 9.0 17.0 34.0 0.067 5/8 0810DH 0.984 0.984 0.433 0.709 1.378 0.188
12 08M12DH 20.0 25.0 9.0 17.0 34.0 0.069 11/16 0811DH 1.063 1.063 0.512 0.787 1.457 0.240
13 08M13DH 21.0 25.0 10.0 18.0 35.0 0.073 3/4 0812DH 1.142 1.142 0.551 0.866 1.535 0.301
14 08M14DH 22.0 25.0 10.0 18.0 35.0 0.076 13/16 0813DH 1.220 1.181 0.551 0.866 1.535 0.341
15 08M15DH 24.0 25.0 11.0 18.0 35.0 0.082 7/8 0814DH 1.339 1.181 0.591 0.984 1.654 0.423
16 08M16DH 25.0 25.0 11.0 18.0 35.0 0.085 15/16 0815DH 1.378 1.181 0.591 0.984 1.654 0.440
17 08M17DH 26.0 26.0 12.0 20.0 37.0 0.099 1 0816DH 1.457 1.181 0.630 1.024 1.693 0.480
18 08M18DH 27.0 27.0 13.0 20.0 37.0 0.109 1.1/16 0817DH 1.535 1.181 0.630 1.024 1.693 0.519
19 08M19DH 29.0 29.0 14.0 22.0 39.0 0.137 1.1/8 0818DH 1.654 1.181 0.669 1.063 1.732 0.575
21 08M21DH 31.0 30.0 14.0 22.0 39.0 0.155 1.3/16 0819DH 1.672 1.732 0.709 1.102 1.772 0.813
22 08M22DH 32.0 30.0 14.0 22.0 39.0 0.162 1.1/4 0820DH 1.772 1.732 0.709 1.102 1.772 0.963
23 08M23DH 34.0 30.0 15.0 25.0 42.0 0.192 1.5/16 0821DH 1.862 1.732 0.709 1.102 1.772 1.083
24 08M24DH 35.0 30.0 15.0 25.0 42.0 0.200 1.3/8 0822DH 1.869 1.732 0.787 1.181 1.850 1.088
25 08M25DH 36.0 30.0 16.0 26.0 43.0 0.211 1.7/16 0823DH 1.968 1.732 0.866 1.220 1.889 1.210
26 08M26DH 37.0 30.0 16.0 26.0 43.0 0.218 1.1/2 0824DH 2.086 1.732 0.866 1.338 2.007 1.255
27 08M27DH 39.0 30.0 16.0 26.0 43.0 0.236
28 08M28DH 40.0 30.0 17.0 27.0 44.0 0.250
30 08M30DH 42.0 30.0 17.0 27.0 44.0 0.261
32 08M32DH 45.0 44.0 18.0 28.0 45.0 0.415
36 08M36DH 50.0 44.0 20.0 30.0 47.0 0.495
 IMPACT SOCKETS THINWALL
1 “
2
METRIC HEXAGON FRACTIONAL HEXAGON
A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
15 S-08M15T 22.0 25.0 11.0 18.0 35.0 0.073 9/16 S-0809T 0.864 0.984 0.433 0.709 1.378 0.160
16 S-08M16T 23.3 25.0 11.0 18.0 35.0 0.078 5/8 S-0810T 0.917 0.984 0.433 0.709 1.378 0.170
17 S-08M17T 25.0 25.0 12.0 19.0 36.0 0.086 11/16 S-0811T 0.984 0.984 0.472 0.748 1.417 0.190
18 S-08M18T 26.0 26.0 13.0 20.0 37.0 0.097 3/4 S-0812T 1.063 1.063 0.551 0.827 1.496 0.240
19 S-08M19T 27.0 27.0 14.0 21.0 38.0 0.109 13/16 S-0813T 1.161 1.161 0.551 0.866 1.535 0.300
21 S-08M21T 29.5 30.0 14.0 22.0 39.0 0.137 15/16 S-0815T 1.341 1.181 0.551 0.905 1.614 0.420

Thinwall Deep Hexagon Sockets available on request.

IMPACT ACCESSORIES
METRIC HEX DRIVER SOCKETS FRACTIONAL HEX DRIVE SOCKETS
HEX A/F MODEL BIT OAL Wt. HEX A/F MODEL BIT OAL Wt.
mm NO. LENGTH mm Kg. inch NO. LENGTH inch lbs.
6 08M6H 15.0 50.0 0.080 1/4 0804H 0.590 1.968 0.160
8 08M8H 15.0 50.0 0.080 5/16 0805H 0.590 1.968 0.175
10 08M10H 18.0 55.0 0.090 3/8 0806H 0.708 2.165 0.190
12 08M12H 18.0 60.0 0.110 7/16 0807H 0.708 2.362 0.200
14 08M14H 25.0 60.0 0.125 1/2 0808H 0.708 2.362 0.255
17 08M17H 25.0 60.0 0.145 9/16 0809H 0.984 2.362 0.255

REGULAR EXTENSIONS
OAL MODEL SHANK DIA HEAD DIA Wt.
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)
75 (3") E0803 0.20 (0.44)
125 (5") E0805 20.0 (0.787) 30.0 (1.181) 0.27 (0.59)
200 (8") E0810 0.38 (0.83)

SQUARE ADAPTORS
MODEL HEAD DIA OAL Wt.
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)
1/2" F X 3/8" M A0806 25.0 (0.984) 40.0 (1.574) 0.07 (0.15)
1/2" F X 3/4" M A0812 30.0 (1.181) 50.0 (1.968) 0.12 (0.26)

UNIVERSAL JOINT
SQUARE MODEL DIA OAL Wt.
DRIVE NO. mm (inch) mm (inch) Kg. (lbs.)

1/2" U0808 30.0 (1.181) 72.0 (2.834) 0.25 (0.55)

DOUBLE MALE EXTENSIONS

OAL MODEL SHANK DIA HEAD DIA Wt.
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)
50 (2") S0802 0.12 (0.26)
17.0 (0.669) 12.7 (0.500)
127 (5") S0805 0.23 (0.50)

DOUBLE FEMALE ADAPTORS

MODEL HEAD DIA OAL Wt.
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)
1/2" F X 1/2" F AN0808 39.0 (1.534) 0.16 (0.35)
30.0 (1.181)
1/2" F X 3/4" F AN0812 47.0 (1.850) 0.20 (0.44)
 T
A/F A/F

D1 D2
IMPACT SOCKETS
3 “
C
OAL
4
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch Ibs.
17 S-12M17 30.0 42.0 12.0 21.0 45.0 0.303 9/16 S-1209 1.131 1.654 0.472 0.827 1.772 0.620
19 S-12M19 32.0 42.0 12.0 21.0 45.0 0.306 5/8 S-1210 1.181 1.654 0.472 0.827 1.772 0.670
21 S-12M21 36.0 42.0 13.0 24.0 48.0 0.336 11/16 S-1211 1.211 1.654 0.472 0.827 1.772 0.690
22 S-12M22 37.0 42.0 13.0 24.0 48.0 0.338 3/4 S-1212 1.260 1.654 0.472 0.827 1.772 0.670
23 S-12M23 39.0 42.0 13.0 24.0 48.0 0.348 13/16 S-1213 1.417 1.654 0.512 0.945 1.890 0.740
24 S-12M24 39.0 42.0 15.0 24.0 48.0 0.342 7/8 S-1214 1.535 1.654 0.512 0.945 1.890 0.770
26 S-12M26 41.0 44.0 15.0 24.0 48.0 0.376 15/16 S-1215 1.535 1.654 0.591 0.945 1.890 0.750
27 S-12M27 44.0 44.0 16.0 24.0 48.0 0.396 1 S-1216 1.614 1.732 0.591 0.945 1.890 0.830
28 S-12M28 44.0 44.0 16.0 24.0 48.0 0.388 1.1/16 S-1217 1.732 1.732 0.630 0.945 1.890 0.870
30 S-12M30 47.0 44.0 18.0 27.0 51.0 0.443 1.1/8 S-1218 1.850 1.732 0.709 1.063 2.008 0.970
32 S-12M32 49.0 44.0 18.0 27.0 51.0 0.453 1.3/16 S-1219 1.880 1.732 0.709 1.063 2.008 0.970
33 S-12M33 50.0 44.0 18.0 27.0 51.0 0.459 1.1/4 S-1220 1.929 1.732 0.709 1.063 2.008 1.000
34 S-12M34 52.0 44.0 20.0 30.0 54.0 0.509 1.5/16 S-1221 2.047 1.732 0.787 1.181 2.126 1.120
36 S-12M36 54.0 54.0 20.0 30.0 54.0 0.647 1.3/8 S-1222 2.076 2.126 0.787 1.181 2.126 1.400
38 S-12M38 57.0 54.0 23.0 35.0 59.0 0.754 1.7/16 S-1223 2.106 2.126 0.787 1.181 2.126 1.400
41 S-12M41 61.0 54.0 23.0 35.0 59.0 0.811 1.1/2 S-1224 2.344 2.126 0.906 1.378 2.323 1.660
42 S-12M42 62.0 54.0 25.0 35.0 59.0 0.814 1.9/16 S-1225 2.352 2.126 0.906 1.378 2.323 1.760
43 S-12M43 63.0 54.0 25.0 38.0 62.0 0.862 1.5/8 S-1226 2.441 2.126 0.984 1.378 2.323 1.790
1.11/16 S-1227 2.480 2.126 0.984 1.496 2.441 1.900
46 S-12M46 67.0 54.0 25.0 38.0 62.0 0.941
1.3/4 S-1228 2.688 2.126 0.984 1.496 2.441 2.070
50 S-12M50 70.0 54.0 28.0 41.0 65.0 0.968
1.13/16 S-1229 2.688 2.126 0.984 1.496 2.441 2.070
1.7/8 S-1230 2.706 2.126 1.102 1.614 2.559 2.130
2 S-1232 2.981 2.441 1.181 1.732 2.677 2.780

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch Ibs.
17 S-12M17L 30.0 42.0 12.0 61.0 85.0 0.463 9/16 S-1209L 1.131 1.654 0.472 2.402 3.346 0.970
19 S-12M19L 32.0 42.0 12.0 61.0 85.0 0.479 5/8 S-1210L 1.181 1.654 0.472 2.402 3.346 1.020
21 S-12M21L 36.0 42.0 13.0 61.0 85.0 0.542 11/16 S-12011L 1.211 1.654 0.472 2.402 3.346 1.040
22 S-12M22L 37.0 42.0 13.0 61.0 85.0 0.551 3/4 S-1212L 1.260 1.654 0.472 2.402 3.346 1.050
23 S-12M23L 39.0 42.0 13.0 61.0 85.0 0.586 13/16 S-1213L 1.417 1.654 0.512 2.402 3.346 1.190
24 S-12M24L 40.0 42.0 15.0 61.0 85.0 0.595 7/8 S-1214L 1.535 1.654 0.512 2.402 3.346 1.290
26 S-12M26L 41.0 42.0 15.0 66.0 90.0 0.618 15/16 S-1215L 1.575 1.654 0.591 2.402 3.346 1.310
27 S-12M27L 43.0 43.0 16.0 66.0 90.0 0.674 1 S-1216L 1.614 1.654 0.591 2.598 3.543 1.360
28 S-12M28L 44.0 44.0 16.0 66.0 90.0 0.699 1.1/16 S-1217L 1.693 1.693 0.630 2.598 3.543 1.480
30 S-12M30L 47.0 44.0 18.0 66.0 90.0 0.769 1.1/8 S-1218L 1.850 1.732 0.709 2.598 3.543 1.690
32 S-12M32L 49.0 44.0 18.0 66.0 90.0 0.798 1.3/16 S-1219L 1.880 1.732 0.709 2.598 3.543 1.710
33 S-12M33L 50.0 44.0 18.0 66.0 90.0 0.812 1.1/4 S-1220L 1.929 1.732 0.709 2.598 3.543 1.760
34 S-12M34L 52.0 44.0 20.0 66.0 90.0 0.869 1.5/16 S-1221L 2.047 1.732 0.787 2.598 3.543 1.910
36 S-12M36L 54.0 54.0 20.0 66.0 90.0 1.034 1.3/8 S-1222L 2.126 2.126 0.787 2.598 3.543 2.280
38 S-12M38L 57.0 54.0 23.0 66.0 90.0 1.125 1.7/16 S-1223L 2.156 2.126 0.787 2.598 3.543 2.300
41 S-12M41L 61.0 54.0 23.0 66.0 90.0 1.229 1.1/2 S-1224L 2.244 2.126 0.906 2.598 3.543 2.470
42 S-12M42L 62.0 54.0 25.0 66.0 90.0 1.241 1.9/16 S-1225L 2.402 2.126 0.906 2.598 3.543 2.700
43 S-12M43L 63.0 54.0 25.0 66.0 90.0 1.255 1.5/8 S-1226L 2.441 2.126 0.984 2.598 3.543 2.730
1.11/16 S-1227L 2.480 2.126 0.984 2.598 3.543 2.760
46 S-12M46L 67.0 54.0 25.0 76.0 100.0 1.563
1.3/4 S-1228L 2.638 2.126 0.984 2.992 3.937 3.440
50 S-12M50L 70.0 54.0 28.0 76.0 100.0 1.573
1.13/16 S-1229L 2.456 2.126 1.102 2.992 3.937 3.410
1.7/8 S-1230L 2.456 2.126 1.102 2.992 3.937 3.410
2 S-1232L 2.731 2.441 1.181 2.992 3.937 4.180
 IMPACT SOCKETS
3 “
4

METRIC BIHEXAGON FRACTIONAL BIHEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
17 12M17DH 32.0 44.0 12.0 20.0 45.0 0.370 9/16 1209DH 1.023 1.732 0.472 0.771 1.771 0.700
19 12M19DH 33.0 44.0 12.0 20.0 45.0 0.370 5/8 1210DH 1.181 1.732 0.472 0.771 1.771 0.815
21 12M21DH 36.0 44.0 13.0 23.0 48.0 0.380 11/16 1211DH 1.259 1.732 0.472 0.771 1.771 0.815
22 12M22DH 37.0 44.0 13.0 23.0 48.0 0.380 3/4 1212DH 1.299 1.732 0.472 0.771 1.771 0.815
23 12M23DH 41.0 44.0 13.0 23.0 48.0 0.390 13/16 1213DH 1.417 1.732 0.511 0.889 1.889 0.835
24 12M24DH 41.0 44.0 16.0 23.0 48.0 0.400 7/8 1214DH 1.456 1.732 0.511 0.889 1.889 0.835
26 12M26DH 41.0 44.0 16.0 23.0 48.0 0.400 15/16 1215DH 1.614 1.732 0.629 0.889 1.889 0.880
27 12M27DH 43.0 44.0 16.0 23.0 48.0 0.400 1 1216DH 1.614 1.732 0.629 0.889 1.889 0.880
28 12M28DH 45.0 44.0 18.0 23.0 48.0 0.410 1.1/16 1217DH 1.629 1.732 0.629 0.889 1.889 0.880
30 12M30DH 47.0 44.0 18.0 27.0 52.0 0.425 1.1/8 1218DH 1.771 1.732 0.708 0.889 1.889 0.900
32 12M32DH 50.0 44.0 19.0 27.0 52.0 0.460 1.3/16 1219DH 1.850 1.732 0.708 1.047 2.047 0.935
33 12M33DH 50.0 44.0 19.0 30.0 55.0 0.480 1.1/4 1220DH 1.968 1.732 0.748 1.047 2.047 1.055
34 12M34DH 52.0 44.0 20.0 30.0 55.0 0.500 1.5/16 1221DH 2.047 1.732 0.748 1.165 2.165 1.100
36 12M36DH 54.0 44.0 20.0 31.0 56.0 0.575 1.3/8 1222DH 2.125 1.732 0.787 1.165 2.165 1.265
38 12M38DH 57.0 44.0 20.0 34.0 59.0 0.600 1.7/16 1223DH 2.125 1.732 0.787 1.204 2.204 1.265
41 12M41DH 61.0 44.0 22.0 34.0 59.0 0.625 1.1/2 1224DH 2.244 1.732 0.787 1.322 2.322 1.320
42 12M42DH 64.0 44.0 22.0 34.0 59.0 0.625 1.9/16 1225DH 2.401 1.732 0.787 1.322 2.322 1.375
43 12M43DH 64.0 44.0 22.0 39.0 64.0 0.625 1.5/8 1226DH 2.401 1.732 0.866 1.322 2.322 1.375
1.11/16 1227DH 2.519 1.732 0.866 1.519 2.519 1.375
46 12M46DH 67.0 54.0 23.0 39.0 64.0 0.825
1.3/4 1228DH 2.519 1.732 0.866 1.519 2.519 1.540
50 12M50DH 73.0 54.0 25.0 42.0 67.0 1.300
1.13/16 1229DH 2.637 1.732 0.905 1.519 2.519 1.815
55 12M55DH 78.0 54.0 28.0 46.0 71.0 1.850 1.7/8 1230DH 2.755 2.125 0.905 1.519 2.519 1.815
60 12M60DH 84.0 54.0 30.0 50.0 75.0 2.050 2 1232DH 2.874 2.125 0.984 1.637 2.637 3.080

METRIC BISQUARE FRACTIONAL BISQUARE

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
32 12M32DS 62.0 44.0 19.0 27.0 52.0 0.510 1.1/4 1220DS 2.440 1.732 0.748 1.047 2.047 1.120
33 12M33DS 65.0 44.0 19.0 27.0 52.0 0.540 1.5/16 1221DS 2.559 1.732 0.748 1.047 2.047 1.210
34 12M34DS 65.0 44.0 20.0 30.0 55.0 0.550 1.3/8 1222DS 2.677 1.732 0.787 1.165 2.165 1.340
36 12M36DS 68.0 44.0 20.0 30.0 55.0 0.610 1.7/16 1223DS 2.755 2.125 0.787 1.165 2.165 1.495
38 12M38DS 70.0 54.0 20.0 30.0 55.0 0.700 1.1/2 1224DS 2.755 2.125 0.787 1.165 2.165 1.540
39 12M39DS 73.0 54.0 20.0 30.0 55.0 0.725 1.9/16 1225DS 2.874 2.125 0.787 1.166 2.165 1.595
40 12M40DS 73.0 54.0 20.0 30.0 55.0 0.725 1.5/8 1226DS 2.952 2.125 0.787 1.283 2.283 1.650
41 12M41DS 75.0 54.0 22.0 33.0 58.0 0.750 1.11/16 1227DS 3.070 2.125 0.866 1.283 2.283 1.650
42 12M42DS 78.0 54.0 22.0 33.0 58.0 0.750 1.3/4 1228DS 3.149 2.125 0.866 1.283 2.283 1.760
43 12M43DS 78.0 54.0 22.0 33.0 58.0 0.750 1.13/16 1229DS 3.267 2.125 0.905 1.362 2.362 2.070
46 12M46DS 83.0 54.0 23.0 35.0 60.0 0.940 1.7/8 1230DS 3.346 2.125 0.905 1.362 2.362 2.110

METRIC DEEP BISQUARE FRACTIONAL DEEP BISQUARE

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
32 12M32LDS 62.0 44.0 19.0 65.0 90.0 0.910 1.1/4 1220LDS 2.440 1.732 0.748 2.543 3.543 2.000
33 12M33LDS 65.0 44.0 19.0 65.0 90.0 0.940 1.5/16 1221LDS 2.559 1.732 0.748 2.543 3.543 2.090
34 12M34LDS 65.0 44.0 20.0 65.0 90.0 0.950 1.3/8 1222LDS 2.677 1.732 0.787 2.543 3.543 2.220
36 12M36LDS 68.0 44.0 20.0 65.0 90.0 1.010 1.7/16 1223LDS 2.755 2.125 0.787 2.543 3.543 2.375
38 12M38LDS 70.0 54.0 20.0 65.0 90.0 1.100 1.1/2 1224LDS 2.755 2.125 0.787 2.543 3.543 2.420
39 12M39LDS 73.0 54.0 20.0 65.0 90.0 1.125 1.9/16 1225LDS 2.874 2.125 0.787 2.543 3.543 2.475
40 12M40LDS 73.0 54.0 20.0 65.0 90.0 1.125 1.5/8 1226LDS 2.952 2.125 0.787 2.543 3.543 2.530
41 12M41LDS 75.0 54.0 22.0 65.0 90.0 1.150 1.11/16 1227LDS 3.070 2.125 0.866 2.740 3.740 2.530
42 12M42LDS 78.0 54.0 22.0 70.0 95.0 1.150 1.3/4 1228LDS 3.149 2.125 0.866 2.740 3.740 2.685
43 12M43LDS 78.0 54.0 22.0 70.0 95.0 1.150 1.13/16 1229LDS 3.267 2.125 0.905 2.937 3.937 2.950
46 12M46LDS 83.0 54.0 23.0 75.0 100.0 1.340 1.7/8 1230LDS 3.346 2.125 0.905 2.937 3.937 3.050
 T
A/F A/F

D1 D2
IMPACT SOCKETS THINWALL
3 “
C
OAL
4
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
17 S-12M17T 27.9 42.0 12.0 21.0 45.0 0.292 11/16 S-1211T 1.078 1.654 0.472 0.827 1.772 0.640
19 S-12M19T 30.4 42.0 12.0 21.0 45.0 0.296 3/4 S-1212T 1.197 1.654 0.472 0.827 1.772 0.650
21 S-12M21T 32.9 42.0 13.0 24.0 48.0 0.312 13/16 S-1213T 1.295 1.654 0.512 0.945 1.890 0.690
22 S-12M22T 34.3 42.0 13.0 24.0 48.0 0.317 7/8 S-1214T 1.390 1.654 0.512 0.945 1.890 0.700
23 S-12M23T 35.3 42.0 13.0 24.0 48.0 0.318 15/16 S-1215T 1.449 1.654 0.591 0.945 1.890 0.710
24 S-12M24T 36.8 42.0 15.0 24.0 48.0 0.322 1 S-1216T 1.516 1.654 0.591 0.945 1.890 0.710
26 S-12M26T 38.5 42.0 15.0 24.0 48.0 0.320 1.1/16 S-1217T 1.594 1.654 0.630 0.945 1.890 0.720
27 S-12M27T 40.5 42.0 16.0 24.0 48.0 0.329 1.1/8 S-1218T 1.748 1.732 0.709 1.063 2.008 0.860
28 S-12M28T 42.0 42.0 16.0 24.0 48.0 0.334 1.3/16 S-1219T 1.778 1.732 0.709 1.063 2.008 0.880
30 S-12M30T 44.4 44.0 18.0 27.0 51.0 0.391 1.1/4 S-1220T 1.843 1.732 0.709 1.063 2.008 0.900
32 S-12M32T 46.8 44.0 18.0 27.0 51.0 0.410 1.5/16 S-1221T 1.941 1.732 0.787 1.181 2.126 0.990
33 S-12M33T 48.0 44.0 18.0 27.0 51.0 0.416 1.3/8 S-1222T 2.043 1.732 0.787 1.181 2.126 1.050
34 S-12M34T 49.3 44.0 20.0 30.0 54.0 0.449 1.7/16 S-1223T 2.073 1.732 0.787 1.181 2.126 1.080
36 S-12M36T 51.9 44.0 20.0 30.0 54.0 0.477 1.1/2 S-1224T 2.142 2.126 0.906 1.378 2.323 1.500
38 S-12M38T 54.4 54.0 23.0 35.0 59.0 0.684 1.9/16 S-1225T 2.299 2.126 0.906 1.378 2.323 1.620
41 S-12M41T 58.4 54.0 23.0 35.0 59.0 0.736 1.5/8 S-1226T 2.378 2.126 0.984 1.496 2.441 1.710
42 S-12M42T 59.4 54.0 25.0 35.0 59.0 0.737 1.11/16 S-1227T 2.378 2.126 0.984 1.496 2.441 1.710
43 S-12M43T 60.4 54.0 25.0 38.0 62.0 0.778 1.3/4 S-1228T 2.500 2.126 0.984 1.496 2.441 1.810
46 S-12M46T 64.0 54.0 25.0 38.0 62.0 0.833 1.13/16 S-1229T 2.530 2.126 0.984 1.496 2.441 1.840

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
17 S-12M17LT 27.9 42.0 12.0 61.0 85.0 0.421 11/16 S-1211LT 1.128 1.654 0.472 2.402 3.346 0.950
19 S-12M19LT 30.4 42.0 12.0 61.0 85.0 0.445 3/4 S-1212LT 1.197 1.654 0.472 2.402 3.346 0.980
21 S-12M21LT 32.9 42.0 13.0 61.0 85.0 0.470 13/16 S-1213LT 1.295 1.654 0.512 2.402 3.346 1.030
22 S-12M22LT 34.3 42.0 13.0 61.0 85.0 0.486 7/8 S-1214LT 1.390 1.654 0.512 2.402 3.346 1.090
23 S-12M23LT 35.3 42.0 13.0 61.0 85.0 0.494 15/16 S-1215LT 1.449 1.654 0.591 2.402 3.346 1.130
24 S-12M24LT 36.8 42.0 15.0 61.0 85.0 0.512 1 S-1216LT 1.516 1.654 0.591 2.598 3.543 1.200
26 S-12M26LT 38.5 42.0 15.0 66.0 90.0 0.545 1.1/16 S-1217LT 1.594 1.654 0.630 2.598 3.543 1.410
27 S-12M27LT 40.5 42.0 16.0 66.0 90.0 0.643 1.1/8 S-1218LT 1.748 1.732 0.709 2.598 3.543 1.500
28 S-12M28LT 42.0 42.0 16.0 66.0 90.0 0.621 1.3/16 S-1219LT 1.778 1.732 0.709 2.598 3.543 1.530
30 S-12M30LT 44.4 44.0 18.0 66.0 90.0 0.682 1.1/4 S-1220LT 1.843 1.732 0.709 2.598 3.543 1.600
32 S-12M32LT 46.8 44.0 18.0 66.0 90.0 0.726 1.5/16 S-1221LT 1.941 1.732 0.787 2.598 3.543 1.690
33 S-12M33LT 48.0 44.0 18.0 66.0 90.0 0.744 1.3/8 S-1222LT 2.043 1.732 0.787 2.598 3.543 1.810
34 S-12M34LT 49.3 44.0 20.0 66.0 90.0 0.767 1.7/16 S-1223LT 2.073 1.732 0.787 2.598 3.543 1.830
36 S-12M36LT 51.9 44.0 20.0 66.0 90.0 0.822 1.1/2 S-1224LT 2.142 2.126 0.906 2.598 3.543 2.240
38 S-12M38LT 54.4 54.0 23.0 66.0 90.0 1.020 1.9/16 S-1225LT 2.299 2.126 0.906 2.598 3.543 2.430
41 S-12M41LT 58.4 54.0 23.0 66.0 90.0 1.103 1.5/8 S-1226LT 2.378 2.126 0.984 2.598 3.543 2.410
42 S-12M42LT 59.4 54.0 25.0 66.0 90.0 1.092 1.11/16 S-1227LT 2.378 2.126 0.984 2.598 3.543 2.410
43 S-12M43LT 60.4 54.0 25.0 66.0 90.0 1.095 1.3/4 S-1228LT 2.520 2.126 0.984 2.598 3.543 2.570
46 S-12M46LT 64.0 54.0 25.0 66.0 90.0 1.169 1.13/16 S-1229LT 2.550 2.126 0.984 2.598 3.543 2.600
 IMPACT ACCESSORIES
3 “
4

METRIC HEX DRIVER SOCKETS FRACTIONAL HEX DRIVE SOCKETS

HEX A/F MODEL BIT OAL Wt HEX A/F MODEL BIT OAL Wt
mm NO. LENGTH mm Kg. inch NO. LENGTH inch lbs.
8 12M08H 12.0 62.0 0.240 3/8 1206H 0.708 2.559 0.550
10 12M10H 18.0 65.0 0.250 7/16 1207H 0.708 2.559 0.550
12 12M12H 25.0 75.0 0.300 1/2 1208H 0.984 2.952 0.660
14 12M14H 25.0 75.0 0.300 9/16 1209H 0.984 2.952 0.660
17 12M17H 35.0 88.0 0.450 5/8 1210H 1.377 3.464 0.715
19 12M19H 35.0 88.0 0.450 3/4 1212H 1.377 3.464 0.990
22 12M22H 40.0 93.0 0.500 13/16 1213H 1.574 3.661 1.100
24 12M24H 45.0 93.0 0.550 7/8 1214H 1.574 3.661 1.210
27 12M27H 45.0 100.0 0.700 1 1216H 1.771 3.937 1.210

REGULAR EXTENSIONS
OAL MODEL SHANK DIA HEAD DIA Wt
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)
75 (3") E1203 0.60 (1.32)
125 (5") E1205 0.80 (1.76)
175 (7") E1207 25.0 (0.984) 44.0 (1.732) 1.00 (2.20)
250 (10") E1210 1.20 (2.64)
330 (13") E1213 1.50 (3.30)

SQUARE ADAPTORS
MODEL HEAD DIA OAL Wt
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)

3/4" F X 1/2" M A1208 56.0 (2.204) 0.33 (0.72)

44.0 (1.732)
3/4" F X 1" M A1216 65.0 (2.559) 0.45 (0.99)

UNIVERSAL JOINT
SQUARE MODEL DIA OAL Wt
DRIVE NO. mm (inch) mm (inch) Kg. (lbs.)

3/4" U1212 44.0 (1.732) 94.0 (3.700) 0.60 (1.32)

DOUBLE MALE EXTENSIONS

OAL MODEL SHANK DIA HEAD DIA Wt
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)
75 (3") S1203 0.40 (0.88)
125 (5") S1205 0.55 (1.21)
175 (7") S1207 0.75 (1.65)
25.0 (0.984) 19.0 (0.750)
250 (10") S1210 0.95 (2.09)
330 (13") S1213 1.05 (2.31)
410 (16") S1216 1.60 (3.50)

DOUBLE FEMALE ADAPTORS

MODEL HEAD DIA OAL Wt
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)

3/4" F X 1/2" F AN1208 55.0 (2.165) 0.45 (0.99)

44.0 (1.732)
3/4" F X 1" F AN1212 63.0 (2.480) 0.57 (1.25)
 T
A/F A/F

D1 D2
IMPACT SOCKETS
C
OAL
1“
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
19 S-16M19 36.0 51.0 14.0 25.0 55.0 0.51 3/4 S-1612 1.417 2.008 0.551 0.984 2.165 1.13
20 S-16M20 36.0 51.0 14.0 25.0 55.0 0.50 13/16 S-1613 1.496 2.008 0.551 0.984 2.165 1.13
21 S-16M21 38.0 51.0 14.0 25.0 55.0 0.52 7/8 S-1614 1.575 2.008 0.551 0.984 2.165 1.14
22 S-16M22 40.0 51.0 14.0 25.0 55.0 0.53 15/16 S-1615 1.654 2.008 0.630 1.063 2.244 1.20
23 S-16M23 40.0 51.0 14.0 25.0 55.0 0.52 1 S-1616 1.772 2.008 0.630 1.063 2.244 1.24
24 S-16M24 42.0 51.0 16.0 27.0 57.0 0.55 1.1/16 S-1617 1.811 2.008 0.630 1.063 2.244 1.25
25 S-16M25 43.0 51.0 16.0 27.0 57.0 0.55 1.1/8 S-1618 1.890 2.008 0.709 1.142 2.323 1.29
26 S-16M26 45.0 51.0 16.0 27.0 57.0 0.56 1.3/16 S-1619 1.969 2.126 0.709 1.142 2.323 1.45
27 S-16M27 46.0 51.0 16..0 27.0 57.0 0.57 1.1/4 S-1620 2.047 2.126 0.709 1.142 2.323 1.49
28 S-16M28 47.0 51.0 16.0 27.0 57.0 0.57 1.5/16 S-1621 2.126 2.126 0.787 1.220 2.402 1.54
29 S-16M29 48.0 51.0 18.0 29.0 59.0 0.59 1.3/8 S-1622 2.126 2.126 0.787 1.220 2.402 1.51
30 S-16M30 49.0 54.0 18.0 29.0 59.0 0.66 1.7/16 S-1623 2.244 2.126 0.787 1.220 2.402 1.68
31 S-16M31 50.0 54.0 18.0 29.0 59.0 0.66 1.1/2 S-1624 2.323 2.126 0.866 1.339 2.520 1.86
32 S-16M32 52.0 54.0 18.0 29.0 59.0 0.68 1.9/16 S-1625 2.362 2.126 0.866 1.339 2.520 1.88
33 S-16M33 54.0 54.0 18.0 29.0 59.0 0.69 1.5/8 S-1626 2.520 2.126 0.945 1.417 2.598 2.13
34 S-16M34 54.0 54.0 20.0 31.0 61.0 0.70 1.11/16 S-1627 2.559 2.126 0.945 1.417 2.598 2.15
35 S-16M35 54.0 54.0 20.0 31.0 61.0 0.69 1.3/4 S-1628 2.677 2.126 0.945 1.417 2.598 2.27
36 S-16M36 57.0 54.0 20.0 31.0 61.0 0.78 1.13/16 S-1629 2.677 2.126 1.024 1.496 2.677 2.25
37 S-16M37 57.0 54.0 20.0 31.0 61.0 0.76 1.7/8 S-1630 2.795 2.126 1.024 1.496 2.677 2.37
38 S-16M38 59.0 54.0 22.0 34.0 64.0 0.84 1.15/16 S-1631 2.795 2.126 1.024 1.496 2.677 2.37
39 S-16M39 60.0 54.0 22.0 34.0 64.0 0.88 2 S-1632 2.963 2.126 1.102 1.575 2.756 2.67
40 S-16M40 60.0 54.0 22.0 34.0 64.0 0.85 2.1/16 S-1633 2.963 2.126 1.102 1.575 2.756 2.67
41 S-16M41 62.0 54.0 22.0 34.0 64.0 0.90 2.1/8 S-1634 3.110 2.441 1.102 1.575 2.756 3.13
42 S-16M42 64.0 54.0 24.0 36.0 66.0 0.97 2.3/16 S-1635 3.150 2.441 1.181 1.732 2.913 3.21
43 S-16M43 65.0 54.0 24.0 36.0 66.0 0.98 2.1/4 S-1636 3.307 2.441 1.181 1.732 2.913 3.50
44 S-16M44 66.0 54.0 24.0 36.0 66.0 0.98 2.5/16 S-1637 3.307 2.441 1.181 1.732 2.913 3.50
45 S-16M45 68.0 54.0 24.0 36.0 66.0 1.03 2.3/8 S-1638 3.405 2.441 1.260 1.850 3.031 3.77
46 S-16M46 68.0 54.0 26.0 38.0 68.0 1.02 2.7/16 S-1639 3.543 2.441 1.339 1.929 3.110 4.17
47 S-16M47 71.0 54.0 26.0 38.0 68.0 1.12 2.1/2 S-1640 3.543 2.441 1.339 1.929 3.110 4.17
48 S-16M48 71.0 54.0 26.0 38.0 68.0 1.08 2.9/16 S-1641 3.711 2.441 1.417 2.008 3.189 4.38
49 S-16M49 74.0 54.0 28.0 40.0 70.0 1.17 2.5/8 S-1642 3.711 2.441 1.417 2.008 3.189 4.38
50 S-16M50 74.0 54.0 28.0 40.0 70.0 1.17 2.11/16 S-1643 3.898 3.386 1.496 2.126 3.307 6.19
51 S-16M51 77.0 62.0 28.0 40.0 70.0 1.40 2.3/4 S-1644 3.898 3.386 1.496 2.126 3.307 6.19
52 S-16M52 77.0 62.0 28.0 40.0 70.0 1.40 2.13/16 S-1645 3.898 3.386 1.496 2.126 3.307 6.19
54 S-16M54 79.0 62.0 28.0 40.0 70.0 1.42 2.7/8 S-1646 4.094 3.386 1.575 2.205 3.504 6.77
55 S-16M55 79.0 62.0 30.0 44.0 74.0 1.45 2.15/16 S-1647 4.094 3.386 1.575 2.205 3.504 6.77
56 S-16M56 80.0 62.0 30.0 44.0 74.0 1.46 3 S-1648 4.094 3.386 1.575 2.205 3.504 6.77
57 S-16M57 84.0 62.0 30.0 44.0 74.0 1.59 3.1/16 S-1649 4.425 3.386 1.654 2.283 3.583 7.80
58 S-16M58 84.0 62.0 30.0 44.0 74.0 1.59 3.1/8 S-1650 4.425 3.386 1.654 2.283 3.583 7.80
59 S-16M59 87.0 62.0 32.0 47.0 77.0 1.75 3.3/16 S-1651 4.425 3.386 1.654 2.283 3.583 7.80
60 S-16M60 87.0 62.0 32.0 47.0 77.0 1.75 3.1/4 S-1652 4.651 3.386 1.732 2.362 3.661 8.13
62 S-16M62 90.0 62.0 34.0 49.0 79.0 1.89 3.5/16 S-1653 4.742 3.386 1.732 2.362 3.661 8.48
65 S-16M65 93.0 62.0 36.0 51.0 81.0 1.99 3.3/8 S-1654 4.742 3.386 1.732 2.362 3.661 8.48
70 S-16M70 99.0 86.0 38.0 54.0 84.0 2.81 3.7/16 S-1655 4.803 3.386 1.811 2.441 3.740 8.44
75 S-16M75 104.0 86.0 40.0 56.0 89.0 3.08 3.1/2 S-1656 4.803 3.386 1.811 2.441 3.740 8.44
80 S-16M80 112.0 86.0 42.0 58.0 91.0 3.54 3.5/8 S-1658 5.118 4.173 1.890 2.520 3.819 11.29
85 S-16M85 119.0 86.0 44.0 60.0 93.0 3.85 3.3/4 S-1660 5.118 4.173 1.890 2.520 3.819 11.29
90 S-16M90 122.0 86.0 46.0 62.0 95.0 3.84 3.7/8 S-1662 5.276 4.173 1.969 2.598 3.898 11.44
95 S-16M95 130.0 106.0 48.0 64.0 97.0 5.13 4 S-1664 5.591 4.173 2.047 2.677 3.976 12.82
100 S-16M100 134.0 106.0 50.0 66.0 99.0 5.20 4.1/8 S-1666 5.591 4.173 2.047 2.677 3.976 12.82
105 S-16M105 142.0 106.0 52.0 68.0 101.0 5.83 4.1/4 S-1668 5.727 4.173 2.126 2.835 4.134 13.05
110 S-16M110 147.0 106.0 54.0 72.0 105.0 6.00 4.3/8 S-1670 6.024 5.000 2.205 2.835 4.134 16.20
115 S-16M115 153.0 127.0 56.0 72.0 105.0 7.36 4.1/2 S-1672 6.024 5.000 2.205 2.835 4.134 16.20
 T
A/F A/F

IMPACT SOCKETS D1 D2

1“ C
OAL
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
19 S-16M19L 36.0 51.0 14.0 72.0 102.0 0.79 3/4 S-1612L 1.417 2.008 0.551 2.835 4.016 1.73
20 S-16M20L 36.0 51.0 14.0 72.0 102.0 0.76 13/16 S-1613L 1.496 2.008 0.551 2.835 4.016 1.78
21 S-16M21L 38.0 51.0 14.0 72.0 102.0 0.81 7/8 S-1614L 1.575 2.008 0.551 2.835 4.016 1.85
22 S-16M22L 40.0 51.0 14.0 72.0 102.0 0.86 15/16 S-1615L 1.654 2.008 0.630 2.835 4.016 1.95
23 S-16M23L 40.0 51.0 14.0 72.0 102.0 0.84 1 S-1616L 1.772 2.008 0.630 2.835 4.016 2.10
24 S-16M24L 42.0 51.0 16.0 72.0 102.0 0.89 1.1/16 S-1617L 1.811 2.008 0.630 2.835 4.016 2.13
25 S-16M25L 43.0 51.0 16.0 72.0 102.0 0.90 1.1/8 S-1618L 1.890 2.008 0.709 2.835 4.016 2.18
26 S-16M26L 45.0 51.0 16.0 72.0 102.0 0.95 1.3/16 S-1619L 1.969 2.126 0.709 2.835 4.016 2.39
27 S-16M27L 46.0 51.0 16.0 72.0 102.0 0.97 1.1/4 S-1620L 2.047 2.126 0.709 2.835 4.016 2.51
28 S-16M28L 47.0 51.0 16.0 72.0 102.0 0.98 1.5/16 S-1621L 2.126 2.126 0.787 2.835 4.016 2.56
29 S-16M29L 48.0 51.0 18.0 72.0 102.0 0.99 1.3/8 S-1622L 2.126 2.126 0.787 2.835 4.016 2.49
30 S-16M30L 49.0 54.0 18.0 72.0 102.0 1.07 1.7/16 S-1623L 2.244 2.126 0.787 2.717 4.016 2.82
31 S-16M31L 50.0 54.0 18.0 72.0 102.0 1.09 1.1/2 S-1624L 2.323 2.126 0.866 2.717 4.016 3.03
32 S-16M32L 52.0 54.0 18.0 72.0 102.0 1.14 1.9/16 S-1625L 2.362 2.126 0.866 2.717 4.016 3.02
33 S-16M33L 54.0 54.0 18.0 72.0 102.0 1.19 1.5/8 S-1626L 2.520 2.126 0.945 2.717 4.016 3.36
34 S-16M34L 54.0 54.0 20.0 72.0 102.0 1.16 1.11/16 S-1627L 2.596 2.126 0.945 2.717 4.016 3.53
35 S-16M35L 54.0 54.0 20.0 72.0 102.0 1.13 1.3/4 S-1628L 2.677 2.126 0.945 2.717 4.016 3.62
36 S-16M36L 57.0 54.0 20.0 69.0 102.0 1.31 1.13/16 S-1629L 2.677 2.126 1.024 2.717 4.016 3.49
37 S-16M37L 57.0 54.0 20.0 69.0 102.0 1.28 1.7/8 S-1630L 2.795 2.126 1.024 2.638 4.016 3.69
38 S-16M38L 59.0 54.0 22.0 69.0 102.0 1.38 1.15/16 S-1631L 2.795 2.126 1.024 2.638 4.016 3.69
39 S-16M39L 60.0 54.0 22.0 69.0 102.0 1.41 2 S-1632L 2.963 2.126 1.102 3.150 4.331 4.41
40 S-16M40L 60.0 54.0 22.0 69.0 102.0 1.37 2.1/16 S-1633L 2.923 2.126 1.102 3.150 4.331 4.41
41 S-16M41L 62.0 54.0 22.0 69.0 102.0 1.45 2.1/8 S-1634L 3.110 2.441 1.181 2.953 4.331 4.81
42 S-16M42L 64.0 54.0 24.0 69.0 102.0 1.53 2.3/16 S-1635L 3.150 2.441 1.181 2.953 4.331 4.85
43 S-16M43L 66.0 54.0 24.0 69.0 102.0 1.61 2.1/4 S-1636L 3.307 2.441 1.181 2.953 4.331 5.32
44 S-16M44L 66.0 54.0 24.0 69.0 102.0 1.56 2.5/16 S-1637L 2.598 2.126 0.945 2.717 4.016 3.44
45 S-16M45L 68.0 54.0 24.0 69.0 102.0 1.65 2.3/8 S-1638L 3.405 2.441 1.260 3.150 4.528 6.04
46 S-16M46L 68.0 54.0 26.0 69.0 102.0 1.59 2.7/16 S-1639L 3.543 2.441 1.260 3.150 4.528 6.30
47 S-16M47L 71.0 54.0 26.0 67.0 102.0 1.73 2.1/2 S-1640L 2.796 2.126 1.024 2.638 4.016 3.81
48 S-16M48L 71.0 54.0 26.0 67.0 102.0 1.68 2.9/16 S-1641L 3.741 2.441 1.339 3.150 4.528 6.38
49 S-16M49L 74.0 54.0 28.0 80.0 110.0 1.96 2.5/8 S-1642L 3.741 2.441 1.339 3.150 4.528 6.38
50 S-16M50L 74.0 54.0 28.0 80.0 110.0 1.96 2.11/16 S-1643L 3.031 2.441 1.102 2.953 4.331 4.90
51 S-16M51L 77.0 62.0 28.0 75.0 110.0 2.23 2.3/4 S-1644L 3.898 2.441 1.417 3.346 4.724 7.22
52 S-16M52L 77.0 62.0 28.0 75.0 110.0 2.23 2.13/16 S-1645L 3.898 2.441 1.417 3.346 4.724 7.22
54 S-16M54L 79.0 62.0 28.0 75.0 110.0 2.26 2.7/8 S-1646L 4.094 3.386 1.496 3.346 4.724 9.18
55 S-16M55L 79.0 62.0 30.0 75.0 110.0 2.19 2.15/16 S-1647L 4.094 3.386 4.496 3.346 4.724 9.18
56 S-16M56L 80.0 62.0 30.0 75.0 110.0 2.21 3 S-1648L 4.094 3.386 1.496 3.346 4.724 9.18
57 S-16M57L 84.0 62.0 30.0 75.0 110.0 2.42 3.1/16 S-1649L 4.425 3.386 1.575 3.346 4.724 10.40
58 S-16M58L 84.0 62.0 30.0 75.0 110.0 2.42 3.1/8 S-1650L 4.425 3.386 1.575 3.346 4.724 10.40
59 S-16M59L 87.0 62.0 32.0 80.0 115.0 2.71 3.3/16 S-1651L 4.425 3.386 1.575 3.346 4.724 10.40
60 S-16M60L 87.0 62.0 32.0 80.0 115.0 2.71 3.1/4 S-1652L 4.651 3.386 1.654 3.543 4.921 10.84
62 S-16M62L 90.0 62.0 32.0 80.0 115.0 2.86 3.5/16 S-1653L 4.751 3.386 1.654 3.543 4.921 11.60
65 S-16M65L 93.0 62.0 34.0 80.0 115.0 2.90 3.3/8 S-1654L 4.751 3.386 1.654 3.543 4.921 11.60
70 S-16M70L 99.0 62.0 36.0 85.0 120.0 3.28 3.7/16 S-1655L 4.803 3.386 1.732 3.543 4.921 11.45
75 S-16M75L 104.0 86.0 38.0 85.0 120.0 4.17 3.1/2 S-1656L 4.803 3.386 1.732 3.543 4.921 11.45
80 S-16M80L 112.0 86.0 40.0 85.0 120.0 4.73 3.5/8 S-1658L 5.118 4.173 1.811 3.740 5.118 15.20
85 S-16M85L 119.0 86.0 42.0 90.0 125.0 5.27 3.3/4 S-1660L 5.118 4.173 1.811 3.740 5.118 15.20
90 S-16M90L 122.0 86.0 44.0 90.0 125.0 5.15 3.7/8 S-1662L 5.276 4.173 1.890 3.740 5.118 15.14
95 S-16M95L 130.0 106.0 46.0 95.0 130.0 6.91 4 S-1664L 5.591 4.173 1.969 3.740 5.118 16.68
100 S-16M100L 134.0 106.0 48.0 95.0 130.0 6.88 4.1/8 S-1666L 5.591 4.173 1.969 3.740 5.118 16.68
105 S-16M105L 142.0 106.0 50.0 95.0 130.0 7.58 4.1/4 S-1668L 5.787 4.173 2.047 4.134 5.512 18.58
110 S-16M110L 147.0 106.0 52.0 105.0 140.0 8.38 4.3/8 S-1670L 6.024 5.000 2.126 4.134 5.512 21.59
115 S-16M115L 153.0 127.0 54.0 105.0 140.0 9.81 4.1/2 S-1672L 6.024 5.000 2.126 4.134 5.512 21.59
 IMPACT SOCKETS
1“

METRIC BIHEXAGON FRACTIONAL BIHEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
19 16M19DH 36.0 51.0 14.0 25.0 55.0 0.51 3/4 1612DH 1.417 2.008 0.551 0.984 2.165 1.13
20 16M20DH 36.0 51.0 14.0 25.0 55.0 0.50 13/16 1613DH 1.496 2.008 0.551 0.984 2.165 1.13
21 16M21DH 38.0 51.0 14.0 25.0 55.0 0.52 7/8 1614DH 1.575 2.008 0.551 0.984 2.165 1.14
22 16M22DH 40.0 51.0 14.0 25.0 55.0 0.53 15/16 1615DH 1.654 2.008 0.630 1.063 2.244 1.20
23 16M23DH 40.0 51.0 14.0 25.0 55.0 0.52 1 1616DH 1.772 2.008 0.630 1.063 2.244 1.24
24 16M24DH 42.0 51.0 16.0 27.0 57.0 0.55 1.1/16 1617DH 1.811 2.008 0.630 1.063 2.244 1.25
25 16M25DH 43.0 51.0 16.0 27.0 57.0 0.55 1.1/8 1618DH 1.890 2.008 0.709 1.142 2.323 1.29
26 16M26DH 45.0 51.0 16.0 27.0 57.0 0.56 1.3/16 1619DH 1.969 2.126 0.709 1.142 2.323 1.45
27 16M27DH 46.0 51.0 16..0 27.0 57.0 0.57 1.1/4 1620DH 2.047 2.126 0.709 1.142 2.323 1.49
28 16M28DH 47.0 51.0 16.0 27.0 57.0 0.57 1.5/16 1621DH 2.126 2.126 0.787 1.220 2.402 1.54
29 16M29DH 48.0 51.0 18.0 29.0 59.0 0.59 1.3/8 1622DH 2.126 2.126 0.787 1.220 2.402 1.51
30 16M30DH 49.0 54.0 18.0 29.0 59.0 0.66 1.7/16 1623DH 2.244 2.126 0.787 1.220 2.402 1.68
31 16M31DH 50.0 54.0 18.0 29.0 59.0 0.66 1.1/2 1624DH 2.323 2.126 0.866 1.339 2.520 1.86
32 16M32DH 52.0 54.0 18.0 29.0 59.0 0.68 1.9/16 1625DH 2.362 2.126 0.866 1.339 2.520 1.88
33 16M33DH 54.0 54.0 18.0 29.0 59.0 0.69 1.5/8 1626DH 2.520 2.126 0.945 1.417 2.598 2.13
34 16M34DH 54.0 54.0 20.0 31.0 61.0 0.70 1.11/16 1627DH 2.559 2.126 0.945 1.417 2.598 2.15
35 16M35DH 54.0 54.0 20.0 31.0 61.0 0.69 1.3/4 1628DH 2.677 2.126 0.945 1.417 2.598 2.27
36 16M36DH 57.0 54.0 20.0 31.0 61.0 0.78 1.13/16 1629DH 2.677 2.126 1.024 1.496 2.677 2.25
37 16M37DH 57.0 54.0 20.0 31.0 61.0 0.76 1.7/8 1630DH 2.795 2.126 1.024 1.496 2.677 2.37
38 16M38DH 59.0 54.0 22.0 34.0 64.0 0.84 1.15/16 1631DH 2.795 2.126 1.024 1.496 2.677 2.37
39 16M39DH 60.0 54.0 22.0 34.0 64.0 0.88 2 1632DH 2.963 2.126 1.102 1.575 2.756 2.67
40 16M40DH 60.0 54.0 22.0 34.0 64.0 0.85 2.1/16 1633DH 2.963 2.126 1.102 1.575 2.756 2.67
41 16M41DH 62.0 54.0 22.0 34.0 64.0 0.90 2.1/8 1634DH 3.110 2.441 1.102 1.575 2.756 3.13
42 16M42DH 64.0 54.0 24.0 36.0 66.0 0.97 2.3/16 1635DH 3.150 2.441 1.181 1.732 2.913 3.21
43 16M43DH 65.0 54.0 24.0 36.0 66.0 0.98 2.1/4 1636DH 3.307 2.441 1.181 1.732 2.913 3.50
44 16M44DH 66.0 54.0 24.0 36.0 66.0 0.98 2.5/16 1637DH 3.307 2.441 1.181 1.732 2.913 3.50
45 16M45DH 68.0 54.0 24.0 36.0 66.0 1.03 2.3/8 1638DH 3.405 2.441 1.260 1.850 3.031 3.77
46 16M46DH 68.0 54.0 26.0 38.0 68.0 1.02 2.7/16 1639DH 3.543 2.441 1.339 1.929 3.110 4.17
47 16M47DH 71.0 54.0 26.0 38.0 68.0 1.12 2.1/2 1640DH 3.543 2.441 1.339 1.929 3.110 4.17
48 16M48DH 71.0 54.0 26.0 38.0 68.0 1.08 2.9/16 1641DH 3.711 2.441 1.417 2.008 3.189 4.38
49 16M49DH 74.0 54.0 28.0 40.0 70.0 1.17 2.5/8 1642DH 3.711 2.441 1.417 2.008 3.189 4.38
50 16M50DH 74.0 54.0 28.0 40.0 70.0 1.17 2.11/16 1643DH 3.898 3.386 1.496 2.126 3.307 6.19
51 16M51DH 77.0 62.0 28.0 40.0 70.0 1.40 2.3/4 1644DH 3.898 3.386 1.496 2.126 3.307 6.19
52 16M52DH 77.0 62.0 28.0 40.0 70.0 1.40 2.13/16 1645DH 3.898 3.386 1.496 2.126 3.307 6.19
54 16M54DH 79.0 62.0 28.0 40.0 70.0 1.42 2.7/8 1646DH 4.094 3.386 1.575 2.205 3.504 6.77
55 16M55DH 79.0 62.0 30.0 44.0 74.0 1.45 2.15/16 1647DH 4.094 3.386 1.575 2.205 3.504 6.77
56 16M56DH 80.0 62.0 30.0 44.0 74.0 1.46 3 1648DH 4.094 3.386 1.575 2.205 3.504 6.77
57 16M57DH 84.0 62.0 30.0 44.0 74.0 1.59 3.1/16 1649DH 4.425 3.386 1.654 2.283 3.583 7.80
58 16M58DH 84.0 62.0 30.0 44.0 74.0 1.59 3.1/8 1650DH 4.425 3.386 1.654 2.283 3.583 7.80
59 16M59DH 87.0 62.0 32.0 47.0 77.0 1.75 3.3/16 1651DH 4.425 3.386 1.654 2.283 3.583 7.80
60 16M60DH 87.0 62.0 32.0 47.0 77.0 1.75 3.1/4 1652DH 4.651 3.386 1.732 2.362 3.661 8.13
62 16M62DH 90.0 62.0 34.0 49.0 79.0 1.89 3.5/16 1653DH 4.742 3.386 1.732 2.362 3.661 8.48
65 16M65DH 93.0 62.0 36.0 51.0 81.0 1.99 3.3/8 1654DH 4.742 3.386 1.732 2.362 3.661 8.48
70 16M70DH 99.0 86.0 38.0 54.0 84.0 2.81 3.7/16 1655DH 4.803 3.386 1.811 2.441 3.740 8.44
75 16M75DH 104.0 86.0 40.0 56.0 89.0 3.08 3.1/2 1656DH 4.803 3.386 1.811 2.441 3.740 8.44
3.5/8 1658DH 5.118 4.173 1.890 2.520 3.819 11.29
80 16M80DH 112.0 86.0 42.0 58.0 91.0 3.54
3.3/4 1660DH 5.118 4.173 1.890 2.520 3.819 11.29
85 16M85DH 119.0 86.0 44.0 60.0 93.0 3.85
3.7/8 1662DH 5.276 4.173 1.969 2.598 3.898 11.44
90 16M90DH 122.0 86.0 46.0 62.0 95.0 3.84
95 16M95DH 130.0 106.0 48.0 64.0 97.0 5.13
 T
A/F A/F

IMPACT SOCKETS D1 D2

1“ C
OAL
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC BISQUARE FRACTIONAL BISQUARE

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
32 16M32DS 65.0 54.0 21.0 28.0 58.0 0.86 1.1/4 1620DS 2.559 2.125 0.826 1.141 2.283 1.89
33 16M33DS 65.0 54.0 21.0 28.0 58.0 0.86 1.5/16 1621DS 2.559 2.125 0.826 1.141 2.283 1.89
34 16M34DS 68.0 54.0 21.0 31.0 61.0 0.90 1.3/8 1622DS 2.677 2.125 0.826 1.220 2.401 1.98
35 16M35DS 68.0 54.0 21.0 31.0 61.0 0.90 1.7/16 1623DS 2.795 2.125 0.984 1.220 2.401 2.02
36 16M36DS 71.0 54.0 25.0 31.0 61.0 0.92 1.1/2 1624DS 2.913 2.125 0.984 1.377 2.559 2.53
38 16M38DS 74.0 54.0 25.0 35.0 65.0 1.15 1.9/16 1625DS 2.834 2.125 0.984 1.377 2.559 2.55
39 16M39DS 74.0 54.0 25.0 35.0 65.0 1.15 1.5/8 1626DS 3.031 2.125 1.102 1.377 2.559 2.55
40 16M40DS 77.0 54.0 25.0 35.0 65.0 1.16 1.11/16 1627DS 3.149 2.125 1.102 1.574 2.755 3.30
41 16M41DS 77.0 54.0 28.0 35.0 65.0 1.16 1.3/4 1628DS 3.267 2.125 1.102 1.574 2.755 3.30
42 16M42DS 80.0 54.0 28.0 35.0 65.0 1.36 1.13/16 1629DS 3.385 2.125 1.102 1.574 2.755 3.52
43 16M43DS 80.0 54.0 28.0 40.0 70.0 1.46 1.7/8 1630DS 3.503 2.125 1.102 1.574 2.755 3.52
46 16M46DS 86.0 54.0 28.0 40.0 70.0 1.50 2 1632DS 3.661 2.125 1.102 1.692 2.874 3.96
50 16M50DS 90.0 54.0 28.0 43.0 73.0 1.70 2.1/16 1633DS 3.779 2.125 1.102 1.692 2.874 4.95
51 16M51DS 93.0 54.0 28.0 43.0 73.0 1.80 2.1/8 1634DS 3.779 2.125 1.102 1.850 3.031 4.95
54 16M54DS 98.0 54.0 28.0 47.0 77.0 2.25 2.3/16 1635DS 3.937 2.125 1.181 1.850 3.031 6.49
55 16M55DS 98.0 54.0 30.0 47.0 77.0 2.25 2.1/4 1636DS 4.055 3.385 1.181 2.007 3.188 6.49
57 16M57DS 103.0 86.0 30.0 47.0 77.0 2.95 2.3/8 1638DS 4.173 3.385 1.259 2.086 3.267 7.04
60 16M60DS 106.0 86.0 32.0 53.0 83.0 3.20 2.1/2 1640DS 4.409 3.385 1.259 2.204 3.385 8.47
65 16M65DS 112.0 86.0 38.0 56.0 86.0 3.65

METRIC DEEP BISQUARE FRACTIONAL DEEP BISQUARE

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
32 16M32LDS 65.0 54.0 21.0 80.0 110.0 1.46 1.1/4 1620LDS 2.559 2.125 0.826 3.149 4.330 3.21
33 16M33LDS 65.0 54.0 21.0 80.0 110.0 1.46 1.5/16 1621LDS 2.559 2.125 0.826 3.149 4.330 3.21
34 16M34LDS 68.0 54.0 21.0 80.0 110.0 1.50 1.3/8 1622LDS 2.677 2.125 0.826 3.149 4.330 3.30
35 16M35LDS 68.0 54.0 21.0 80.0 110.0 1.50 1.7/16 1623LDS 2.795 2.125 0.984 3.149 4.330 3.34
36 16M36LDS 71.0 54.0 25.0 80.0 110.0 1.52 1.1/2 1624LDS 2.913 2.125 0.984 3.149 4.330 3.85
38 16M38LDS 74.0 54.0 25.0 80.0 110.0 1.75 1.9/16 1625LDS 2.834 2.125 0.984 3.149 4.330 3.87
39 16M39LDS 74.0 54.0 25.0 80.0 110.0 1.75 1.5/8 1626LDS 3.031 2.125 1.102 3.149 4.330 3.87
40 16M40LDS 77.0 54.0 25.0 80.0 110.0 1.76 1.11/16 1627LDS 3.149 2.125 1.102 3.149 4.330 4.75
41 16M41LDS 77.0 54.0 28.0 80.0 110.0 1.76 1.3/4 1628LDS 3.267 2.125 1.102 3.149 4.330 4.84
42 16M42LDS 80.0 54.0 28.0 80.0 110.0 1.96 1.13/16 1629LDS 3.385 2.125 1.102 3.149 4.330 5.06
43 16M43LDS 80.0 54.0 28.0 80.0 110.0 2.16 1.7/8 1630LDS 3.503 2.125 1.102 3.149 4.330 5.28
46 16M46LDS 86.0 54.0 28.0 80.0 110.0 2.30 2 1632LDS 3.661 2.125 1.102 3.149 4.330 5.72
50 16M50LDS 90.0 54.0 28.0 80.0 110.0 2.50 2.1/16 1633LDS 3.779 2.125 1.102 3.149 4.330 6.49
51 16M51LDS 93.0 54.0 28.0 80.0 110.0 2.60 2.1/8 1634LDS 3.779 2.125 1.102 3.149 4.330 6.49
54 16M54LDS 98.0 54.0 28.0 80.0 110.0 2.95 2.3/16 1635LDS 3.937 2.125 1.181 3.149 4.330 8.03
55 16M55LDS 98.0 54.0 30.0 80.0 110.0 2.95 2.1/4 1636LDS 4.055 3.385 1.181 3.149 4.330 8.03
57 16M57LDS 103.0 86.0 30.0 80.0 110.0 3.65 2.3/8 1638LDS 4.173 3.385 1.259 3.937 5.118 8.80
60 16M60LDS 106.0 86.0 32.0 100.0 130.0 4.00 2.1/2 1640LDS 4.409 3.385 1.259 3.937 5.118 10.01
65 16M65LDS 112.0 86.0 38.0 100.0 130.0 4.55
 IMPACT SOCKETS THINWALL
1“

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
22 S-16M22T 35.6 51.0 14.0 25.0 55.0 0.48 7/8 S-1614T 1.457 2.008 0.551 0.984 2.165 1.06
23 S-16M23T 37.0 51.0 14.0 25.0 55.0 0.48 15/16 S-1615T 1.508 2.008 0.630 1.063 2.244 1.10
24 S-16M24T 38.0 51.0 16.0 27.0 57.0 0.50 1 S-1616T 1.606 2.008 0.630 1.063 2.244 1.12
25 S-16M25T 39.5 51.0 16.0 27.0 57.0 0.50 1.1/16 S-1617T 1.654 2.008 0.630 1.063 2.244 1.13
26 S-16M26T 40.8 51.0 16.0 27.0 57.0 0.51 1.1/8 S-1618T 1.752 2.008 0.709 1.142 2.323 1.18
27 S-16M27T 42.0 51.0 16.0 27.0 57.0 0.52 1.3/16 S-1619T 1.850 2.008 0.709 1.142 2.323 1.21
28 S-16M28T 43.3 51.0 16.0 27.0 57.0 0.52 1.1/4 S-1620T 1.902 2.008 0.709 1.142 2.323 1.23
29 S-16M29T 44.5 51.0 18.0 29.0 59.0 0.54 1.5/16 S-1621T 2.008 2.008 0.787 1.220 2.402 1.29
30 S-16M30T 45.9 51.0 18.0 29.0 59.0 0.55 1.3/8 S-1622T 2.047 2.126 0.787 1.220 2.402 1.44
31 S-16M31T 47.0 51.0 18.0 29.0 59.0 0.55 1.7/16 S-1623T 2.126 2.126 0.787 1.220 2.402 1.51
32 S-16M32T 48.3 51.0 18.0 29.0 59.0 0.56 1.1/2 S-1624T 2.201 2.126 0.866 1.339 2.520 1.65
33 S-16M33T 49.5 51.0 18.0 29.0 59.0 0.56 1.9/16 S-1625T 2.287 2.126 0.866 1.339 2.520 1.73
34 S-16M34T 51.0 51.0 20.0 31.0 61.0 0.59
1.5/8 S-1626T 2.398 2.126 0.945 1.417 2.598 1.87
35 S-16M35T 52.0 54.0 20.0 31.0 61.0 0.65
1.11/16 S-1627T 2.437 2.126 0.945 1.417 2.598 1.89
36 S-16M36T 53.4 54.0 20.0 31.0 61.0 0.69
37 S-16M37T 54.0 54.0 20.0 31.0 61.0 0.69
1.3/4 S-1628T 2.543 2.126 0.945 1.417 2.598 1.97
38 S-16M38T 55.9 54.0 22.0 34.0 64.0 0.75
1.13/16 S-1629T 2.594 2.126 1.024 1.496 2.677 2.05
39 S-16M39T 57.1 54.0 22.0 34.0 64.0 0.78
40 S-16M40T 58.1 54.0 22.0 34.0 64.0 0.79
41 S-16M41T 59.9 54.0 22.0 34.0 64.0 0.82
42 S-16M42T 60.9 54.0 24.0 36.0 66.0 0.85
43 S-16M43T 62.0 54.0 24.0 36.0 66.0 0.86
44 S-16M44T 63.4 54.0 24.0 36.0 66.0 0.88
45 S-16M45T 64.6 54.0 24.0 36.0 66.0 0.89
46 S-16M46T 65.9 54.0 26.0 38.0 68.0 0.93

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
22 S-16M22LT 35.6 54.0 14.0 80.0 110.0 1.05 7/8 S-1614LT 1.417 2.125 0.629 3.149 4.330 2.21
23 S-16M23LT 37.0 54.0 14.0 80.0 110.0 1.05 15/16 S-1615LT 1.507 2.125 0.629 3.149 4.330 2.21
24 S-16M24LT 38.3 54.0 16.0 80.0 110.0 1.05 1 S-1616LT 1.574 2.125 0.629 3.149 4.330 2.42
25 S-16M25LT 39.5 54.0 16.0 80.0 110.0 1.10 1.1/16 S-1617LT 1.653 2.125 0.629 3.149 4.330 2.53
26 S-16M26LT 40.8 54.0 16.0 80.0 110.0 1.10 1.1/8 S-1618LT 1.728 2.125 0.629 3.149 4.330 2.53
27 S-16M27LT 42.0 54.0 16.0 80.0 110.0 1.10 1.3/16 S-1619LT 1.807 2.125 0.826 3.149 4.330 2.70
28 S-16M28LT 43.3 54.0 16.0 80.0 110.0 1.15 1.1/4 S-1620LT 1.889 2.125 0.826 3.149 4.330 2.75
29 S-16M29LT 44.5 54.0 16.0 80.0 110.0 1.15 1.5/16 S-1621LT 1.968 2.125 0.826 3.149 4.330 2.95
30 S-16M30LT 45.9 54.0 21.0 80.0 110.0 1.22 1.3/8 S-1622LT 2.047 2.125 0.826 3.149 4.330 2.86
31 S-16M31LT 47.0 54.0 21.0 80.0 110.0 1.21 1.7/16 S-1623LT 2.125 2.125 0.984 3.149 4.330 3.22
32 S-16M32LT 48.3 54.0 21.0 80.0 110.0 1.25 1.1/2 S-1624LT 2.200 2.125 0.984 3.149 4.330 3.30
33 S-16M33LT 49.5 54.0 21.0 80.0 110.0 1.27 1.9/16 S-1625LT 2.283 2.125 0.984 3.149 4.330 3.52
34 S-16M34LT 50.8 54.0 21.0 80.0 110.0 1.30
1.5/8 S-1626LT 2.358 2.125 1.102 3.149 4.330 3.52
35 S-16M35LT 52.0 54.0 21.0 80.0 110.0 1.30
1.11/16 S-1627LT 2.437 2.125 1.102 3.149 4.330 3.52
36 S-16M36LT 53.4 54.0 25.0 80.0 110.0 1.30
37 S-16M37LT 54.0 54.0 25.0 80.0 110.0 1.45
1.3/4 S-1628LT 2.519 2.125 1.102 3.149 4.330 3.74
38 S-16M38LT 55.9 54.0 25.0 80.0 110.0 1.50
1.13/16 S-1629LT 2.594 2.125 1.102 3.149 4.330 3.74
39 S-16M39LT 57.1 54.0 25.0 80.0 110.0 1.60
40 S-16M40LT 58.1 54.0 25.0 80.0 110.0 1.60
41 S-16M41LT 59.9 54.0 28.0 80.0 110.0 1.60
42 S-16M42LT 60.9 54.0 28.0 80.0 110.0 1.65
43 S-16M43LT 61.9 54.0 28.0 80.0 110.0 1.70
44 S-16M44LT 63.4 54.0 28.0 80.0 110.0 1.70
45 S-16M45LT 64.6 54.0 28.0 80.0 110.0 1.70
46 S-16M46LT 65.9 54.0 28.0 80.0 110.0 2.15
 IMPACT ACCESSORIES
1“
METRIC HEX DRIVER SOCKETS FRACTIONAL HEX DRIVE SOCKETS
HEX A/F MODEL BIT OAL Wt HEX A/F MODEL BIT OAL Wt
mm NO. LENGTH mm Kg. inch NO LENGTH inch lbs.
10 16M10H 20.0 85.0 0.60 1/2 1608H 0.984 3.543 1.43
12 16M12H 25.0 90.0 0.65 9/16 1609H 0.984 3.543 1.65
14 16M14H 25.0 90.0 0.75 5/8 1610H 1.181 3.740 1.65
17 16M17H 30.0 95.0 0.80 3/4 1612H 1.181 3.740 1.76
19 16M19H 30.0 95.0 0.80 13/16 1613H 1.771 4.527 1.87
22 16M22H 45.0 115.0 0.90 7/8 1614H 1.771 4.527 1.98
24 16M24H 45.0 115.0 0.95 1 1616H 1.968 4.724 2.20
27 16M27H 50.0 120.0 1.15 1.1/16 1617H 1.968 4.724 2.20
30 16M30H 50.0 120.0 1.20 1.1/8 1618H 1.968 4.724 2.42
32 16M32H 50.0 120.0 1.30 1.3/16 1619H 1.968 4.724 2.64
36 16M36H 50.0 120.0 1.30 1.1/4 1620H 1.968 4.724 2.86

REGULAR EXTENSIONS
OAL MODEL SHANK DIA HEAD DIA Wt
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)
100 (4") E1604 1.10 (2.42)
125 (5") E1605 1.30 (2.86)
150 (6") E1606 1.50 (3.30)
36.0 (1.417) 54.0 (2.125)
180 (7") E1607 1.75 (3.85)
250 (10") E1610 2.00 (4.40)
330 (13") E1613 2.45 (5.39)

SQUARE ADAPTORS
MODEL HEAD DIA OAL Wt
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)
1" F X 3/4" M A1612 70.0 (2.755) 0.64 (1.40)
1" F X 1.1/2" M A1624 54.0 (2.125) 90.0 (3.543) 0.90 (1.98)
1" F X #5 M A1695 110.0 (4.330) 1.20 (2.64)

UNIVERSAL JOINT
SQUARE MODEL DIA OAL Wt
DRIVE NO. mm (inch) mm (inch) Kg. (lbs.)

1" U1616 54.0 (2.125) 117.0 (4.606) 1.20 (2.64)

DOUBLE MALE EXTENSIONS

OAL MODEL SHANK DIA HEAD DIA Wt
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)
75 (3") S1603 0.70 (1.54)
125 (5") S1605 1.00 (2.20)
180 (7") S1607 1.45 (3.19)
250 (10") S1610 35.0 (1.377) 25.0 (1.000) 1.70 (3.74)
330 (13") S1613 2.20 (4.84)
380 (15") S1615 2.50 (5.50)
430 (17") S1617 3.00 (6.60)

DOUBLE FEMALE ADAPTORS

MODEL HEAD DIA OAL Wt
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)
1" F X 3/4" F AN1612 65.0 (2.559) 0.75 (1.65)
1" F X 1" F AN1616 54.0 (2.125) 70.0 (2.755) 0.95 (2.09)
1" F X 1.1/2" F AN1624 80.0 (3.149) 1.10 (2.42)
 T
A/F A/F

D1 D2
IMPACT SOCKETS

A/F
C
OAL
Nominal size across flats
1 1 “
2
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
32 S-24M32 58.0 82.0 19.0 33.0 75.0 1.91 1.3/8 S-2422 2.441 3.228 0.827 1.378 3.031 4.30
33 S-24M33 59.0 82.0 19.0 33.0 75.0 1.91 1.7/16 S-2423 2.520 3.228 0.827 1.378 3.031 4.30
34 S-24M34 60.0 82.0 20.0 33.0 75.0 1.91 1.1/2 S-2424 2.559 3.307 0.827 1.378 3.031 4.60
35 S-24M35 62.0 82.0 21.0 35.0 77.0 1.97 1.9/16 S-2425 2.677 3.307 0.866 1.417 3.071 4.70
36 S-24M36 63.0 82.0 21.0 35.0 77.0 1.97 1.5/8 S-2426 2.717 3.307 0.906 1.457 3.110 4.70
37 S-24M37 64.0 82.0 21.0 35.0 77.0 1.97 1.11/16 S-2427 2.795 3.307 0.945 1.496 3.150 4.80
38 S-24M38 65.0 84.0 21.0 35.0 77.0 2.07 1.3/4 S-2428 2.913 3.307 0.984 1.535 3.189 4.90
39 S-24M39 67.0 84.0 22.0 36.0 78.0 2.12 1.13/16 S-2429 2.953 3.386 1.024 1.575 3.228 5.20
40 S-24M40 68.0 84.0 22.0 36.0 78.0 2.13 1.7/8 S-2430 3.071 3.386 1.024 1.575 3.228 5.30
41 S-24M41 69.0 84.0 23.0 37.0 79.0 2.14 1.15/16 S-2431 3.110 3.386 1.063 1.614 3.268 5.30
42 S-24M42 70.0 84.0 23.0 37.0 79.0 2.15 2 S-2432 3.189 3.386 1.063 1.614 3.268 5.30
43 S-24M43 71.0 84.0 24.0 38.0 80.0 2.17 2.1/16 S-2433 3.228 3.386 1.102 1.654 3.307 5.40
44 S-24M44 73.0 84.0 24.0 38.0 80.0 2.20 2.1/8 S-2434 3.307 3.386 1.102 1.654 3.307 5.40
45 S-24M45 74.0 84.0 25.0 39.0 81.0 2.22 2.3/16 S-2435 3.465 3.386 1.142 1.693 3.346 6.00
46 S-24M46 75.0 86.0 26.0 40.0 82.0 2.35 2.1/4 S-2436 3.465 3.386 1.142 1.693 3.346 5.90
47 S-24M47 77.0 86.0 26.0 40.0 82.0 2.38 2.5/16 S-2437 3.543 3.386 1.181 1.732 3.386 6.10
48 S-24M48 78.0 86.0 26.0 40.0 82.0 2.39 2.3/8 S-2438 3.543 3.386 1.260 1.811 3.465 6.10
49 S-24M49 79.0 86.0 27.0 41.0 83.0 2.41 2.7/16 S-2439 3.701 3.386 1.260 1.811 3.465 6.40
50 S-24M50 80.0 86.0 27.0 41.0 83.0 2.42 2.1/2 S-2440 3.751 3.386 1.260 1.811 3.465 7.30
51 S-24M51 81.0 86.0 27.0 41.0 83.0 2.42 2.9/16 S-2441 3.858 3.386 1.339 1.890 3.543 6.80
52 S-24M52 82.0 86.0 28.0 42.0 84.0 2.45 2.5/8 S-2442 3.976 3.386 1.417 1.969 3.622 7.20
54 S-24M54 84.0 86.0 28.0 42.0 84.0 2.47 2.11/16 S-2443 4.026 3.386 1.417 1.969 3.622 7.40
55 S-24M55 86.0 86.0 29.0 43.0 85.0 2.52 2.3/4 S-2444 4.094 3.386 1.496 2.087 3.740 7.50
56 S-24M56 88.0 86.0 29.0 43.0 85.0 2.71 2.13/16 S-2445 4.144 3.386 1.496 2.087 3.740 8.30
57 S-24M57 88.0 86.0 29.0 43.0 85.0 2.67 2.7/8 S-2446 4.252 3.386 1.575 2.165 3.819 8.20
58 S-24M58 90.0 86.0 30.0 44.0 86.0 2.78 2.15/16 S-2447 4.372 3.386 1.654 2.323 3.976 8.90
59 S-24M59 90.0 86.0 32.0 46.0 88.0 2.75 3 S-2448 4.420 3.386 1.654 2.323 3.976 9.80
60 S-24M60 90.0 86.0 32.0 46.0 88.0 2.75 3.1/16 S-2449 4.646 3.386 1.732 2.402 4.055 9.70
61 S-24M61 94.0 86.0 32.0 46.0 88.0 2.92 3.1/8 S-2450 4.646 3.386 1.732 2.402 4.055 9.70
62 S-24M62 94.0 86.0 32.0 46.0 88.0 2.92 3.3/16 S-2451 4.716 3.386 1.732 2.402 4.055 10.70
65 S-24M65 98.0 86.0 34.0 48.0 90.0 3.09 3.1/4 S-2452 4.716 3.386 1.732 2.402 4.055 10.70
67 S-24M67 101.0 86.0 36.0 50.0 92.0 3.26 3.5/16 S-2453 4.882 3.386 1.969 2.677 4.331 10.60
70 S-24M70 104.0 86.0 38.0 53.0 95.0 3.40 3.3/8 S-2454 4.882 3.386 1.969 2.677 4.331 10.60
73 S-24M73 108.0 86.0 40.0 55.0 97.0 3.71 3.7/16 S-2455 5.118 4.173 2.087 2.795 4.449 13.70
75 S-24M75 111.0 86.0 42.0 59.0 101.0 4.04 3.1/2 S-2456 5.118 4.173 2.087 2.795 4.449 13.70
76 S-24M76 118.0 86.0 44.0 61.0 103.0 4.41 3.9/16 S-2457 5.193 4.173 2.087 2.795 4.449 13.80
80 S-24M80 118.0 86.0 44.0 61.0 103.0 4.41 3.5/8 S-2458 5.193 4.173 2.087 2.795 4.449 13.80
85 S-24M85 124.0 86.0 48.0 66.0 108.0 4.88 3.11/16 S-2459 5.315 4.173 2.205 2.913 4.567 17.00
86 S-24M86 124.0 86.0 50.0 68.0 110.0 4.82 3.3/4 S-2460 5.315 4.173 2.205 2.913 4.567 17.00
90 S-24M90 130.0 106.0 53.0 71.0 113.0 6.24 3.13/16 S-2461 5.670 4.173 2.323 3.031 4.685 17.00
95 S-24M95 135.0 106.0 56.0 74.0 116.0 6.56 3.7/8 S-2462 5.670 4.173 2.323 3.031 4.685 17.00
100 S-24M100 143.0 106.0 59.0 77.0 119.0 7.48 3.15/16 S-2463 5.745 4.173 2.323 3.031 4.685 17.90
105 S-24M105 148.0 106.0 62.0 82.0 124.0 7.93 4 S-2464 5.745 4.173 2.323 3.031 4.685 17.90
110 S-24M110 154.0 106.0 65.0 85.0 127.0 8.51 4.1/16 S-2465 5.827 4.173 2.441 3.228 4.882 17.40
115 S-24M115 161.0 127.0 68.0 88.0 130.0 10.48 4.1/8 S-2466 5.827 4.173 2.441 3.228 4.882 17.40
120 S-24M120 168.0 127.0 71.0 91.0 133.0 11.38 4.3/16 S-2467 6.103 4.173 2.559 3.346 5.000 18.70
125 S-24M125 174.0 127.0 74.0 96.0 138.0 12.31 4.1/4 S-2468 6.103 4.173 2.559 3.346 5.000 18.70
130 S-24M130 180.0 127.0 77.0 99.0 141.0 13.09 4.3/8 S-2470 6.193 4.173 2.559 3.346 5.000 19.70
4.1/2 S-2472 6.339 5.000 2.677 3.465 5.118 23.00
4.5/8 S-2474 6.419 5.000 2.677 3.465 5.118 24.20
4.3/4 S-2476 6.614 5.000 2.795 3.583 5.236 25.00
5 S-2480 6.930 5.000 2.913 3.780 5.433 28.30
5.1/8 S-2482 7.087 5.000 3.031 3.898 5.551 28.80
 T
A/F A/F

IMPACT SOCKETS D1 D2

1 1 “
2
A/F
C
OAL
Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch lbs.
32 S-24M32L 58.0 82.0 19.0 78.0 120.0 2.55 1.3/8 S-2422L 2.441 3.228 0.827 3.071 4.724 5.80
33 S-24M33L 59.0 82.0 19.0 78.0 120.0 2.57 1.7/16 S-2423L 2.520 3.228 0.827 3.071 4.724 5.90
34 S-24M34L 60.0 82.0 20.0 78.0 120.0 2.58 1.1/2 S-2424L 2.559 3.228 0.827 3.071 4.724 5.90
35 S-24M35L 62.0 82.0 21.0 78.0 120.0 2.65 1.9/16 S-2425L 2.677 3.307 0.866 3.071 4.724 6.40
36 S-24M36L 63.0 82.0 21.0 78.0 120.0 2.67 1.5/8 S-2426L 2.717 3.307 0.906 3.268 4.921 6.70
37 S-24M37L 64.0 82.0 21.0 78.0 120.0 2.69 1.11/16 S-2427L 2.795 3.307 0.945 3.268 4.921 6.80
38 S-24M38L 65.0 82.0 21.0 78.0 120.0 2.70 1.3/4 S-2428L 2.913 3.307 0.984 3.268 4.921 7.00
39 S-24M39L 67.0 84.0 22.0 78.0 120.0 2.91 1.13/16 S-2429L 2.953 3.386 1.024 3.268 4.921 7.30
40 S-24M40L 68.0 84.0 22.0 78.0 120.0 2.92 1.7/8 S-2430L 3.071 3.386 1.024 3.268 4.921 7.50
41 S-24M41L 69.0 84.0 23.0 83.0 125.0 3.03 1.15/16 S-2431L 3.110 3.386 1.063 3.268 4.921 7.50
42 S-24M42L 70.0 84.0 23.0 83.0 125.0 3.05 2 S-2432L 3.189 3.386 1.063 3.268 4.921 7.60
43 S-24M43L 71.0 84.0 24.0 83.0 125.0 3.07 2.1/16 S-2433L 3.228 3.386 1.102 3.465 5.118 8.00
44 S-24M44L 73.0 84.0 24.0 83.0 125.0 3.16 2.1/8 S-2434L 3.307 3.386 1.102 3.465 5.118 8.10
45 S-24M45L 74.0 84.0 25.0 83.0 125.0 3.17 2.3/16 S-2435L 3.465 3.386 1.142 3.465 5.118 9.10
46 S-24M46L 75.0 86.0 26.0 83.0 125.0 3.30 2.1/4 S-2436L 3.465 3.386 1.142 3.465 5.118 8.90
47 S-24M47L 77.0 86.0 26.0 83.0 125.0 3.39 2.5/16 S-2437L 3.543 3.386 1.181 3.465 5.118 9.20
48 S-24M48L 78.0 86.0 26.0 83.0 125.0 3.41 2.3/8 S-2438L 3.543 3.386 1.260 3.465 5.118 8.90
49 S-24M49L 79.0 86.0 27.0 83.0 125.0 3.42 2.7/16 S-2439L 3.701 3.386 1.260 3.465 5.118 9.60
50 S-24M50L 80.0 86.0 27.0 83.0 125.0 3.44 2.1/2 S-2440L 3.751 3.386 1.260 3.465 5.118 10.50
51 S-24M51L 81.0 86.0 27.0 83.0 125.0 3.46 2.9/16 S-2441L 3.898 3.386 1.339 3.858 5.512 11.10
52 S-24M52L 82.0 86.0 28.0 88.0 130.0 3.64 2.5/8 S-2442L 3.976 3.386 1.417 3.858 5.512 11.20
54 S-24M54L 84.0 86.0 28.0 88.0 130.0 3.67 2.11/16 S-2443L 4.026 3.386 1.417 3.858 5.512 11.40
55 S-24M55L 86.0 86.0 29.0 88.0 130.0 3.80 2.3/4 S-2444L 4.094 3.386 1.496 3.858 5.512 11.50
56 S-24M56L 88.0 86.0 29.0 88.0 130.0 4.12 2.13/16 S-2445L 4.144 3.386 1.496 3.858 5.512 12.30
57 S-24M57L 88.0 86.0 29.0 88.0 130.0 4.05 2.7/8 S-2446L 4.291 3.386 1.575 3.858 5.512 12.60
58 S-24M58L 90.0 86.0 30.0 88.0 130.0 4.20 2.15/16 S-2447L 4.370 3.386 1.654 4.252 5.906 13.80
59 S-24M59L 90.0 86.0 32.0 88.0 130.0 4.04 3 S-2448L 4.420 3.386 1.654 4.252 5.906 14.70
60 S-24M60L 90.0 86.0 32.0 88.0 130.0 4.04 3.1/16 S-2449L 4.646 3.386 1.732 4.252 5.906 15.00
61 S-24M61L 94.0 86.0 32.0 88.0 130.0 4.35 3.1/8 S-2450L 4.646 3.386 1.732 4.252 5.906 15.00
62 S-24M62L 94.0 86.0 32.0 88.0 130.0 4.35 3.3/16 S-2451L 4.716 3.386 1.732 4.252 5.906 16.00
65 S-24M65L 99.0 86.0 34.0 98.0 140.0 5.05 3.1/4 S-2452L 4.716 3.386 1.732 4.252 5.906 16.00
67 S-24M67L 101.0 86.0 36.0 98.0 140.0 5.11 3.5/16 S-2453L 4.882 3.386 1.969 4.646 6.299 16.70
70 S-24M70L 104.0 86.0 38.0 98.0 140.0 5.23 3.3/8 S-2454L 4.882 3.386 1.969 4.646 6.299 16.70
73 S-24M73L 109.0 86.0 40.0 98.0 140.0 5.73 3.7/16 S-2455L 5.118 4.173 2.087 5.039 6.693 21.30
75 S-24M75L 111.0 86.0 42.0 108.0 150.0 6.27 3.1/2 S-2456L 5.118 4.173 2.087 5.039 6.693 21.30
76 S-24M76L 118.0 86.0 44.0 108.0 150.0 6.82 3.9/16 S-2457L 5.193 4.173 2.087 5.039 6.693 21.40
80 S-24M80L 118.0 86.0 44.0 108.0 150.0 6.82 3.5/8 S-2458L 5.193 4.173 2.087 5.039 6.693 21.40
85 S-24M85L 124.0 86.0 48.0 118.0 160.0 7.79 3.11/16 S-2459L 5.315 4.173 2.205 5.039 6.693 21.90
86 S-24M86L 124.0 86.0 50.0 118.0 160.0 7.57 3.3/4 S-2460L 5.315 4.173 2.205 5.039 6.693 21.90
90 S-24M90L 130.0 106.0 53.0 128.0 170.0 9.68 3.13/16 S-2461L 5.670 4.173 2.323 5.039 6.693 24.90
95 S-24M95L 135.0 106.0 56.0 128.0 170.0 9.97 3.7/8 S-2462L 5.670 4.173 2.323 5.039 6.693 24.90
100 S-24M100L 143.0 106.0 59.0 128.0 170.0 11.03 3.15/16 S-2463L 5.745 4.173 2.323 5.039 6.693 25.80
105 S-24M105L 148.0 106.0 62.0 138.0 180.0 11.99 4 S-2464L 5.745 4.173 2.323 5.039 6.693 25.80
110 S-24M110L 154.0 106.0 65.0 138.0 180.0 12.61 4.1/16 S-2465L 5.827 4.173 2.441 5.433 7.087 26.40
115 S-24M115L 161.0 127.0 68.0 138.0 180.0 14.69 4.1/8 S-2466L 5.827 4.173 2.441 5.433 7.087 26.40
120 S-24M120L 167.0 127.0 71.0 148.0 190.0 16.25 4.3/16 S-2467L 6.103 4.173 2.559 5.433 7.087 27.70
125 S-24M125L 174.0 127.0 74.0 148.0 190.0 17.35 4.1/4 S-2468L 6.103 4.173 2.559 5.433 7.087 27.70
130 S-24M130L 180.0 127.0 77.0 148.0 190.0 18.11 4.3/8 S-2470L 6.193 4.173 2.559 5.433 7.087 28.70
4.1/2 S-2472L 6.339 5.000 2.677 5.433 7.087 32.30
4.5/8 S-2474L 6.575 5.000 2.795 5.827 7.480 35.70
4.3/4 S-2476L 6.575 5.000 2.795 5.827 7.480 35.70
5 S-2480L 6.930 5.000 2.913 5.827 7.480 39.40
5.1/8 S-2482L 7.087 5.000 3.031 5.827 7.480 39.90
 IMPACT ACCESSORIES
1
1 “
2

REGULAR EXTENSIONS
OAL MODEL SHANK DIA HEAD DIA Wt
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)

150 (6") E2406 3.90 (8.58)

52.0 (2.047) 86.0 (3.386)
304 (12") E2412 6.30 (13.86)

DOUBLE MALE EXTENSIONS

OAL MODEL SHANK DIA HEAD DIA Wt
mm (inch) NO. mm (inch) mm (inch) Kg. (lbs.)
100 (4") S2404 2.50 (5.50)
125 (5") S2405 2.80 (6.16)
52.0 (2.047) 38.1 (1.500)
250 (10") S2410 3.60 (7.92)
510 (20") S2420 5.10 (11.20)

SQUARE ADAPTORS
MODEL HEAD DIA OAL Wt
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)
1.1/2" F X 1" M A2416 100.0 (3.937) 1.98 (4.37)
1.1/2" F X 2.1/2" M A2440 86.0 (3.386) 113.0 (4.448) 3.92 (8.65)
1.1/2" F X #5 M A2495 115.0 (4.527) 4.20 (9.25)

DOUBLE FEMALE ADAPTORS

MODEL HEAD DIA OAL Wt
SIZE
NO. mm (inch) mm (inch) Kg. (lbs.)
1.1/2" F X 1" F AN2416 80.0 (3.149) 2.30 (5.06)
1.1/2" F X 1.1/2" F AN2424 86.0 (3.386) 95.0 (3.740) 3.60 (7.92)
1.1/2" F X 2.1/2" F AN2440 110.0 (4.330) 4.50 (9.90)

UNIVERSAL JOINT
SQUARE MODEL DIA OAL Wt
DRIVE NO. mm (inch) mm (inch) Kg. (lbs.)

1.1/2" U2424 86.0 (3.386) 158 (6.220) 3.85 (8.47)

TORQTOOL Impact Sockets ideal for use with

Hydraulic Torque Wrenches.
 T
A/F A/F

IMPACT SOCKETS D1 D2

2 1 “
2
A/F
C
OAL
Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC HEXAGON FRACTIONAL HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch Ibs.
43 S-40M43 86.0 116.0 28.0 46.0 104.0 5.24 1.5/8 S-4026 3.386 4.567 1.102 1.811 4.094 11.30
44 S-40M44 86.0 116.0 28.0 46.0 104.0 5.20 1.3/4 S-4028 3.386 4.567 1.102 1.811 4.094 11.30
45 S-40M45 86.0 116.0 28.0 46.0 104.0 5.15 1.7/8 S-4030 3.386 4.567 1.102 1.811 4.094 11.30
46 S-40M46 86.0 116.0 28.0 46.0 104.0 5.11 2 S-4032 3.543 4.567 1.142 1.811 4.094 11.10
47 S-40M47 86.0 116.0 28.0 46.0 104.0 5.06 2.1/8 S-4034 3.642 4.882 1.181 1.811 4.094 12.90
48 S-40M48 86.0 116.0 28.0 46.0 104.0 5.01 2.1/4 S-4036 3.789 4.882 1.260 2.047 4.331 13.50
49 S-40M49 86.0 116.0 28.0 46.0 104.0 4.97 2.3/8 S-4038 3.937 5.000 1.417 2.205 4.488 14.60
50 S-40M50 86.1 116.0 28.0 46.0 104.0 4.92 2.1/2 S-4040 4.133 5.000 1.496 2.283 4.567 15.00
51 S-40M51 90.0 116.0 29.0 46.0 104.0 5.07 2.5/8 S-4042 4.281 5.000 1.496 2.283 4.567 15.20
52 S-40M52 90.0 116.0 29.0 46.0 104.0 5.02 2.3/4 S-4044 4.429 5.000 1.575 2.362 4.646 15.50
54 S-40M54 92.5 124.0 30.0 46.0 104.0 5.87 2.7/8 S-4046 4.577 5.000 1.575 2.362 4.646 15.70
55 S-40M55 93.8 124.0 32.0 52.0 110.0 6.08 2.15/16 S-4047 4.675 5.000 1.654 2.520 4.803 16.20
56 S-40M56 95.0 124.0 32.0 52.0 110.0 6.10 3 S-4048 4.774 5.000 1.732 2.520 4.803 16.40
57 S-40M57 96.3 124.0 32.0 52.0 110.0 6.12 3.1/8 S-4050 4.921 5.000 1.732 2.520 4.803 16.50
58 S-40M58 97.5 124.0 32.0 52.0 110.0 6.14 3.1/4 S-4052 4.999 5.000 1.890 2.677 4.961 16.70
59 S-40M59 98.8 127.0 34.0 54.0 112.0 6.55 3.3/8 S-4054 5.197 5.000 1.969 2.677 5.079 18.90
60 S-40M60 100.0 127.0 36.0 56.0 114.0 6.64 3.1/2 S-4056 5.354 5.000 2.047 2.756 5.118 19.50
62 S-40M62 103.0 127.0 36.0 56.0 114.0 6.69 3.5/8 S-4058 5.394 5.000 2.047 2.756 5.118 20.40
65 S-40M65 106.0 127.0 38.0 58.0 116.0 6.83 3.3/4 S-4060 5.591 5.000 2.126 2.835 5.197 20.60
67 S-40M67 109.0 127.0 38.0 58.0 116.0 6.89 3.7/8 S-4062 5.787 5.000 2.205 3.071 5.433 21.60
70 S-40M70 113.0 127.0 40.0 60.0 118.0 7.05 4 S-4064 5.827 5.000 2.205 3.071 5.433 22.40
73 S-40M73 116.0 127.0 40.0 60.0 118.0 7.13 4.1/8 S-4066 6.063 5.000 2.362 3.228 5.591 24.20
75 S-40M75 119.0 127.0 42.0 64.0 122.0 7.38 4.1/4 S-4068 6.299 5.000 2.520 3.386 5.748 25.50
76 S-40M76 120.0 127.0 44.0 64.0 122.0 7.39 4.3/8 S-4070 6.379 5.000 2.520 3.386 5.748 26.40
80 S-40M80 125.0 127.0 44.0 64.0 122.0 7.50 4.1/2 S-4072 6.496 5.000 2.638 3.504 5.866 26.80
85 S-40M85 129.0 127.0 48.0 68.0 126.0 8.06 4.5/8 S-4074 6.536 5.000 2.638 3.504 5.866 28.00
86 S-40M86 132.0 127.0 50.0 68.0 129.0 8.59 4.7/8 S-4078 7.047 5.000 2.874 3.740 6.024 30.10
90 S-40M90 136.0 127.0 52.0 70.0 130.0 8.87 5 S-4080 7.163 5.000 2.992 3.858 6.142 31.00
95 S-40M95 142.0 127.0 54.0 72.0 132.0 9.37 5.1/8 S-4082 7.203 5.000 2.992 3.858 6.142 32.10
100 S-40M100 148.0 127.0 56.0 78.0 138.0 10.20 5.1/4 S-4084 7.203 5.000 2.992 3.858 6.142 32.10
105 S-40M105 154.0 127.0 60.0 82.0 142.0 10.99 5.3/8 S-4086 7.609 5.984 3.110 4.055 6.339 41.10
110 S-40M110 161.0 127.0 64.0 86.0 146.0 11.89 5.1/2 S-4088 7.717 5.984 3.228 4.173 6.457 40.90
115 S-40M115 165.0 127.0 67.0 89.0 149.0 12.19 5.5/8 S-4090 7.757 5.984 3.228 4.173 6.457 41.70
120 S-40M120 173.0 127.0 70.0 92.0 152.0 13.30 5.3/4 S-4092 8.081 5.984 3.346 4.291 6.575 45.20
125 S-40M125 179.0 127.0 73.0 95.0 153.0 13.68 6.1/8 S-4098 9.016 6.890 3.780 4.803 7.087 59.80
130 S-40M130 185.0 127.0 76.0 98.0 156.0 14.52 6.1/2 S-40104 9.016 6.890 3.780 4.803 7.087 59.80
135 S-40M135 192.0 152.0 79.0 103.0 161.0 18.37 6.7/8 S-40110 9.528 6.890 3.937 5.039 7.323 66.40
140 S-40M140 196.0 152.0 82.0 106.0 164.0 18.58 7 S-40112 9.685 6.890 4.055 5.157 7.441 66.60
145 S-40M145 204.0 152.0. 85.0 109.0 167.0 20.22 7.1/4 S-40116 10.000 6.890 4.173 5.276 7.559 71.60
150 S-40M150 211.0 152.0 88.0 112.0 170.0 21.37 7.1/2 S-40120 10.276 6.890 4.291 5.394 7.677 74.90
155 S-40M155 215.0 152.0 91.0 117.0 175.0 22.04 7.5/8 S-40122 10.433 6.890 4.409 5.591 7.874 76.60
160 S-40M160 223.0 152.0 94.0 120.0 178.0 23.92 7.3/4 S-40124 10.433 6.890 4.409 5.591 7.874 76.60
165 S-40M165 229.0 175.0 96.0 122.0 180.0 27.19 7.7/8 S-40126 10.748 6.890 4.528 5.709 7.992 82.50
170 S-40M170 235.0 175.0 98.0 126.0 184.0 28.93 8 S-40128 10.748 6.890 4.528 5.709 7.992 83.60
175 S-40M175 242.0 175.0 100.0 128.0 186.0 30.20 8.1/8 S-40130 11.220 6.890 4.724 5.906 8.189 87.80
180 S-40M180 246.0 175.0 103.0 131.0 189.0 30.28 8.1/4 S-40132 11.220 6.890 4.724 5.906 8.189 87.80
185 S-40M185 254.0 175.0 106.0 134.0 192.0 32.54 8.3/8 S-40134 11.225 6.890 4.724 5.906 8.189 88.70
190 S-40M190 261.0 175.0 109.0 137.0 195.0 34.04 8.1/2 S-40136 11.496 6.890 4.843 6.024 8.307 92.30
195 S-40M195 265.0 175.0 112.0 142.0 200.0 34.80
9 S-40144 12.029 6.890 5.118 6.299 8.583 101.80
200 S-40M200 273.0 175.0 115.0 145.0 203.0 37.49
9.1/4 S-40148 12.029 6.890 5.118 6.299 8.583 101.80
210 S-40M210 285.0 175.0 120.0 150.0 208.0 39.91
215 S-40M215 292.0 175.0 123.0 153.0 211.0 41.94
225 S-40M225 304.0 175.0 130.0 160.0 218.0 45.71
 IMPACT SOCKETS
2 1 “
2

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL Wt. A/F MODEL D1 D2 T C OAL Wt.
mm NO. mm mm mm mm mm Kg. inch NO. inch inch inch inch inch Ibs.
43 S-40M43L 86.0 106.0 26.0 110.0 168.0 6.43 1.5/8 S-4026L 3.386 4.173 1.024 4.331 6.614 13.80
44 S-40M44L 86.0 106.0 26.0 110.0 168.0 6.36 1.3/4 S-4028L 3.386 4.173 1.024 4.331 6.614 13.80
45 S-40M45L 86.0 106.0 26.0 110.0 168.0 6.29 1.7/8 S-4030L 3.386 4.567 1.102 4.331 6.614 13.80
46 S-40M46L 86.0 106.0 27.0 110.0 168.0 6.22 2 S-4032L 3.543 4.567 1.142 4.331 6.614 15.90
47 S-40M47L 86.0 106.0 28.0 110.0 168.0 6.14 2.1/8 S-4034L 3.642 4.882 1.181 4.331 6.614 17.80
48 S-40M48L 86.0 116.0 28.0 110.0 168.0 7.03 2.1/4 S-4036L 3.789 4.882 1.260 4.606 6.890 18.90
49 S-40M49L 86.0 116.0 28.0 110.0 168.0 6.95 2.3/8 S-4038L 3.937 5.000 1.417 4.606 6.890 20.00
50 S-40M50L 86.0 116.0 29.0 110.0 168.0 6.86 2.1/2 S-4040L 4.133 5.000 1.496 5.000 7.283 21.80
51 S-40M51L 90.0 116.0 29.0 110.0 168.0 7.24 2.5/8 S-4042L 4.281 5.000 1.496 5.000 7.283 22.30
52 S-40M52L 90.0 116.0 29.0 110.0 168.0 7.16 2.3/4 S-4044L 4.429 5.000 1.575 5.000 7.283 22.80
54 S-40M54L 92.5 124.0 30.0 110.0 168.0 8.11 2.7/8 S-4046L 4.577 5.000 1.575 5.000 7.283 23.40
55 S-40M55L 93.8 124.0 32.0 110.0 168.0 8.18 2.15/16 S-4047L 4.675 5.000 1.654 5.000 7.283 23.70
56 S-40M56L 95.0 124.0 32.0 117.0 175.0 8.51 3 S-4048L 4.774 5.000 1.732 5.000 7.283 24.10
57 S-40M57L 96.3 124.0 32.0 117.0 175.0 8.58 3.1/8 S-4050L 4.921 5.000 1.732 5.000 7.283 24.60
58 S-40M58L 97.5 124.0 32.0 117.0 175.0 8.65 3.1/4 S-4052L 4.999 5.000 1.890 5.394 7.677 26.30
59 S-40M59L 98.8 127.0 34.0 117.0 175.0 9.04 3.3/8 S-4054L 5.197 5.000 1.969 5.276 7.677 28.70
60 S-40M60L 100.0 127.0 36.0 117.0 175.0 9.10 3.1/2 S-4056L 5.354 5.000 2.047 5.315 7.677 29.50
62 S-40M62L 103.0 127.0 36.0 127.0 185.0 9.66 3.5/8 S-4058L 5.394 5.000 2.047 5.315 7.677 30.40
65 S-40M65L 106.0 127.0 38.0 127.0 185.0 9.90 3.3/4 S-4060L 5.591 5.000 2.126 5.472 7.835 31.80
67 S-40M67L 109.0 127.0 38.0 127.0 185.0 10.13 3.7/8 S-4062L 5.787 5.000 2.205 5.315 7.677 32.40
70 S-40M70L 113.0 127.0 40.0 127.0 185.0 10.37 4 S-4064L 5.827 5.000 2.205 5.315 7.677 33.20
73 S-40M73L 116.0 127.0 40.0 127.0 185.0 10.62 4.1/8 S-4066L 6.063 5.000 2.362 5.709 8.071 35.90
75 S-40M75L 119.0 127.0 42.0 127.0 185.0 10.78 4.1/4 S-4068L 6.299 5.000 2.520 5.866 8.228 38.20
76 S-40M76L 120.0 127.0 44.0 127.0 185.0 10.85 4.3/8 S-4070L 6.379 5.000 2.520 5.866 8.228 39.10
80 S-40M80L 125.0 127.0 44.0 127.0 185.0 11.20 4.1/2 S-4072L 6.496 5.000 2.638 5.906 8.268 39.00
85 S-40M85L 129.0 127.0 48.0 137.0 195.0 12.42 4.5/8 S-4074L 6.536 5.000 2.638 5.906 8.268 40.20
86 S-40M86L 132.0 127.0 50.0 134.0 195.0 13.03 4.7/8 S-4078L 7.047 5.000 2.874 6.181 8.465 45.30
90 S-40M90L 136.0 127.0 52.0 135.0 195.0 13.40 5 S-4080L 7.163 5.000 2.992 6.181 8.465 47.20
95 S-40M95L 142.0 127.0 54.0 139.0 199.0 14.47 5.1/8 S-4082L 7.203 5.000 2.992 6.181 8.465 48.30
100 S-40M100L 148.0 127.0 56.0 135.0 195.0 15.07 5.1/4 S-4084L 7.203 5.000 2.992 6.181 8.465 48.30
105 S-40M105L 154.0 127.0 60.0 145.0 205.0 16.33 5.3/8 S-4086L 7.609 5.984 3.110 6.378 8.661 57.20
110 S-40M110L 161.0 127.0 64.0 149.0 109.0 17.67 5.1/2 S-4088L 7.717 5.984 3.228 6.575 8.858 57.70
115 S-40M115L 165.0 127.0 67.0 150.0 210.0 17.72 5.5/8 S-4090L 7.757 5.984 3.228 6.575 8.858 58.50
120 S-40M120L 173.0 127.0 70.0 150.0 210.0 19.23 5.3/4 S-4092L 8.081 5.984 3.346 6.772 9.055 64.10
125 S-40M125L 179.0 127.0 73.0 157.0 215.0 20.57 6.1/8 S-4098L 9.016 6.890 3.780 7.165 9.449 82.60
130 S-40M130L 185.0 127.0 76.0 157.0 215.0 21.44 6.1/2 S-40104L 9.016 6.890 3.780 7.165 9.449 82.60
135 S-40M135L 192.0 152.0 79.0 162.0 220.0 25.67 6.7/8 S-40110L 9.528 6.890 3.397 7.165 9.449 89.90
140 S-40M140L 196.0 152.0 82.0 167.0 225.0 26.22 7 S-40112L 9.685 6.890 4.055 7.362 9.646 91.60
145 S-40M145L 204.0 152.0 85.0 172.0 230.0 28.82 7.1/4 S-40116L 10.000 6.890 4.173 7.559 9.843 100.30
150 S-40M150L 211.0 152.0 88.0 172.0 230.0 30.38 7.1/2 S-40120L 10.276 6.890 4.291 7.559 9.843 103.20
155 S-40M155L 215.0 152.0 91.0 177.0 235.0 30.97 7.5/8 S-40122L 10.433 6.890 4.409 7.835 10.118 106.20
160 S-40M160L 223.0 152.0 94.0 177.0 235.0 33.49 7.3/4 S-40124L 10.433 6.890 4.409 7.835 10.118 106.20
165 S-40M165L 229.0 175.0 96.0 182.0 240.0 37.53 7.7/8 S-40126L 10.748 6.890 4.528 7.953 10.236 114.20
170 S-40M170L 235.0 175.0 98.0 182.0 240.0 39.22 8 S-40128L 10.798 6.890 4.528 7.953 10.236 115.30
175 S-40M175L 242.0 175.0 100.0 182.0 240.0 40.86 8.1/8 S-40130L 11.220 6.890 4.724 7.953 10.236 120.40
180 S-40M180L 246.0 175.0 103.0 187.0 245.0 41.63 8.1/4 S-40132L 11.220 6.890 4.724 7.953 10.236 120.40
185 S-40M185L 254.0 175.0 106.0 192.0 250.0 45.61 8.3/8 S-40134L 11.225 6.890 4.724 7.953 10.236 121.30
190 S-40M190L 261.0 175.0 109.0 192.0 250.0 46.93 8.1/2 S-40136L 11.496 6.890 4.843 8.346 10.630 130.70
195 S-40M195L 265.0 175.0 112.0 199.0 257.0 48.28
9 S-40144L 12.029 6.890 5.118 8.661 10.630 138.50
200 S-40M200L 273.0 175.0 115.0 202.0 260.0 51.89
9.1/4 S-40148L 12.029 6.890 5.118 8.661 10.630 138.50
210 S-40M210L 285.0 175.0 120.0 202.0 260.0 54.71
215 S-40M215L 292.0 175.0 123.0 212.0 270.0 59.42
225 S-40M225L 304.0 175.0 130.0 220.0 270.0 62.42
 IMPACT ACCESSORIES
2 1 “
2

DOUBLE MALE EXTENSIONS

OAL MODEL SHANK DIA HEAD DIA
mmc (inch) NO. mm (inch) mm (inch)
125 (5") S4005
150 (6") S4006
200 (8") S4008
85.0 (3.346) 63.5 (2.500)
250 (10") S4010
380 (15") S4015
510 (20") S4020

SQUARE ADAPTORS
MODEL HEAD DIA OAL
SIZE
NO. mm (inch) mm (inch)

2.1/2" F X 1.1/2" M A4024 140.0 (5.511)

127.0 (5.000)
2.1/2" F X 3.1/2" M A4056 185.0 (7.283)

DOUBLE FEMALE ADAPTORS

MODEL HEAD DIA OAL
SIZE
NO. mm (inch) mm (inch)
2.1/2" F X 1.1/2" F AN4024 115.0 (4.527)
2.1/2" F X 2.1/2" F AN4040 127.0 (5.000) 120.0 (4.724)
2.1/2" F X 3.1/2" F AN4056 162.0 (6.377)

UNIVERSAL JOINT
SQUARE MODEL DIA OAL
DRIVE NO. mm (inch) mm (inch)

2.1/2" U4040 127.0 (5.000) 232.0 (9.133)

TORQTOOL Impact Socket used along with a TORQPLUS Torque Multiplier

 IMPACT SOCKETS
3 1 “
2
METRIC HEXAGON FRACTIONAL HEXAGON
A/F MODEL D1 D2 T C OAL A/F MODEL D1 D2 T C OAL
mm NO. mm mm mm mm mm inch NO. inch inch inch inch inch
120 S-56M120 180.0 175.0 72.0 102.0 182.0 4.5/8 S-5674 6.889 6.889 2.834 4.015 7.165
130 S-56M130 193.0 175.0 80.0 110.0 190.0 4.7/8 S-5678 7.283 6.889 2.834 4.330 7.480
135 S-56M135 197.0 175.0 83.0 118.0 198.0 5.1/4 S-5684 7.755 6.889 3.149 4.645 7.795
145 S-56M145 213.0 175.0 86.0 134.0 214.0 5.3/8 S-5686 7.874 6.889 3.267 4.645 7.795
150 S-56M150 218.0 175.0 90.0 134.0 214.0 5.5/8 S-5690 8.267 6.889 3.385 5.275 8.425
155 S-56M155 225.0 175.0 92.0 134.0 214.0 5.3/4 S-5692 8.385 6.889 3.385 5.275 8.425
165 S-56M165 237.0 175.0 98.0 151.0 231.0 6 S-5696 8.700 6.889 3.543 5.275 8.425
170 S-56M170 243.0 175.0 100.0 151.0 231.0 6.1/8 S-5698 8.858 6.889 3.622 5.275 8.425
175 S-56M175 249.0 175.0 102.0 151.0 231.0 6.1/2 S-56104 9.330 6.889 3.858 5.944 9.094
180 S-56M180 255.0 175.0 108.0 157.0 237.0 6.7/8 S-56110 9.803 6.889 4.015 5.944 9.094
195 S-56M195 275.0 175.0 118.0 165.0 245.0 7.1/4 S-56116 10275 6.889 4.409 6.181 9.330
200 S-56M200 280.0 175.0 120.0 170.0 250.0 7.5/8 S-56122 10.826 6.889 4.645 6.496 9.645
215 S-56M215 298.0 175.0 125.0 183.0 263.0 8 S-56128 11.220 6.889 4.724 7.204 10.354
230 S-56M230 317.0 175.0 132.0 199.0 279.0 8.3/8 S-56134 11.653 6.889 4.803 7.204 10.354
235 S-56M235 325.0 175.0 136.0 199.0 279.0 9.1/8 S-56146 12.598 6.889 5.196 7.834 10.984

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

A/F MODEL D1 D2 T C OAL A/F MODEL D1 D2 T C OAL
mm NO. mm mm mm mm mm inch NO. inch inch inch inch inch
120 S-56M120L 180.0 175.0 72.0 197.0 277.0 4.5/8 S-5674L 6.889 6.889 2.834 7.756 10.906
130 S-56M130L 193.0 175.0 80.0 200.0 280.0 4.7/8 S-5678L 7.283 6.889 2.834 7.756 10.906
135 S-56M135L 197.0 175.0 83.0 200.0 280.0 5.1/4 S-5684L 7.755 6.889 3.149 7.874 11.024
145 S-56M145L 213.0 175.0 86.0 215.0 295.0 5.3/8 S-5686L 7.874 6.889 3.267 7.874 11.024
150 S-56M150L 218.0 175.0 90.0 215.0 295.0 5.5/8 S-5690L 8.267 6.889 3.385 8.543 11.693
155 S-56M155L 225.0 175.0 92.0 217.0 297.0 5.3/4 S-5692L 8.385 6.889 3.385 8.543 11.693
165 S-56M165L 237.0 175.0 98.0 233.0 313.0 6 S-5696L 8.700 6.889 3.543 8.543 11.693
170 S-56M170L 243.0 175.0 100.0 233.0 313.0 6.1/8 S-5698L 9.055 6.889 3.622 8.543 11.693
175 S-56M175L 249.0 175.0 102.0 233.0 313.0 6.1/2 S-56104L 9.330 6.889 3.858 9.173 12.323
180 S-56M180L 255.0 175.0 108.0 240.0 320.0 6.7/8 S-56110L 9.803 6.889 4.015 9.173 12.323
195 S-56M195L 275.0 175.0 118.0 248.0 328.0 7.1/4 S-56116L 10.275 6.889 4.409 9.448 12.598
200 S-56M200L 280.0 175.0 120.0 252.0 332.0 7.5/8 S-56122L 10.826 6.889 4.645 9.763 12.913
215 S-56M215L 298.0 175.0 125.0 266.0 346.0 8 S-56128L 11.220 6.889 4.724 10.472 13.322
230 S-56M230L 317.0 175.0 132.0 279.0 359.0 8.3/8 S-56134L 11.653 6.889 4.803 10.472 13.622
235 S-56M235L 325.0 175.0 136.0 282.0 362.0 9.1/8 S-56146L 12.598 6.889 5.196 11.102 14.252

IMPACT ACCESSORIES
DOUBLE MALE EXTENSIONS
OAL MODEL SHANK DIA HEAD DIA
mm (inch) NO. mm (inch) mm (inch)

250 (10") S5610

120.0 (4.724) 175.0 (6.889)
510 (20") S5620

SQUARE ADAPTORS
MODEL HEAD DIA OAL
SIZE
NO. mm (inch) mm (inch)

3.1/2" F X 2.1/2" M A5640 175.0 (6.889) 185.0 (7.283)

DOUBLE FEMALE ADAPTORS

MODEL HEAD DIA OAL
SIZE
NO. mm (inch) mm (inch)

3.1/2" F X 2.1/2" F AN5640 175.0 (6.889) 165.0 (6.496)

 T
A/F A/F
#5
SPLINE
DRIVE IMPACT SOCKETS D1 D2

C
OAL
A/F Nominal size across flats
D1 Max. outside dia. socket end
D2 Max. outside dia. sq.drive end
OAL Nominal overall length
T Min. depth of socket form
C Bolt clearence depth

METRIC # 5 SPLINE FRACTIONAL # 5 SPLINE

A/F MODEL D1 D2 T C OAL A/F MODEL D1 D2 T C OAL
mm NO. mm mm mm mm mm inch NO. inch inch inch inch inch
19 S-95M19 48.0 56.0 16.0 35.0 68.0 3/4 S-9512 2.200 0.911 0.629 1.375 2.672
20 S-95M20 48.0 56.0 16.0 35.0 68.0 13/16 S-9513 2.200 0.979 0.629 1.375 2.672
21 S-95M21 48.0 56.0 16.0 35.0 68.0 7/8 S-9514 2.200 1.051 0.629 1.375 2.672
22 S-95M22 48.0 56.0 16.0 35.0 68.0 15/16 S-9515 2.200 1.123 0.629 1.375 2.672
23 S-95M23 48.0 56.0 16.0 35.0 68.0 1 S-9516 2.200 1.196 0.707 1.454 2.750
24 S-95M24 48.0 56.0 16.0 35.0 68.0 1.1/16 S-9517 2.200 1.268 0.707 1.454 2.750
25 S-95M25 50.0 56.0 18.0 37.0 70.0 1.1/8 S-9518 2.200 1.340 0.786 1.532 2.289
26 S-95M26 50.0 56.0 18.0 37.0 70.0 1.3/16 S-9519 2.200 1.413 0.864 1.611 2.908
27 S-95M27 52.0 56.0 20.0 39.0 72.0 1.1/4 S-9520 2.200 1.485 0.864 1.611 2.908
28 S-95M28 52.0 56.0 20.0 39.0 72.0 1.5/16 S-9521 2.200 1.557 0.864 1.611 2.908
29 S-95M29 53.0 56.0 22.0 41.0 74.0 1.3/8 S-9522 2.200 1.625 0.982 1.729 3.026
30 S-95M30 53.5 56.0 22.0 41.0 74.0 1.7/16 S-9523 2.200 1.697 0.982 1.729 3.026
31 S-95M31 54.0 56.0 22.0 41.0 74.0 1.1/2 S-9524 2.200 1.770 0.982 1.729 3.026
32 S-95M32 54.0 56.0 22.0 41.0 74.0 1.9/16 S-9525 2.200 1.842 0.982 1.729 3.026
33 S-95M33 58.0 56.0 22.0. 41.0 74.0 1.5/8 S-9526 2.200 1.914 1.100 1.847 3.143
34 S-95M34 58.0 56.0 22.0 41.0 74.0 1.11/16 S-9527 2.200 1.986 1.100 1.847 3.143
35 S-95M35 59.8 56.0 25.0 44.0 77.0 1.3/4 S-9528 2.200 2.059 1.100 1.925 3.222
36 S-95M36 64.0 56.0 25.0 44.0 77.0 1.13/16 S-9529 2.200 2.131 1.100 1.925 3.222
37 S-95M37 63.0 56.0 25.0 44.0 77.0 1.7/8 S-9530 2.200 2.199 1.100 1.925 3.222
38 S-95M38 63.5 56.0 25.0 44.0 77.0 1.15/16 S-9531 2.200 2.276 1.100 2.004 3.301
39 S-95M39 64.0 56.0 25.0 44.0 77.0 2 S-9532 2.200 2.352 1.179 2.083 3.379
40 S-95M40 64.0 56.0 25.0 44.0 77.0 2.1/16 S-9533 2.200 2.420 1.179 2.083 3.379
41 S-95M41 68.0 56.0 28.0 47.0 80.0 2.1/8 S-9534 2.200 2.506 1.179 2.083 3.379
42 S-95M42 68.0 56.0 28.0 47.0 80.0 2.3/16 S-9535 2.200 2.560 1.336 2.318 3.615
43 S-95M43 68.0 56.0 28.0 47.0 80.0 2.1/4 S-9536 3.379 2.633 1.336 2.318 3.615
44 S-95M44 73.0 56.0 28.0 49.0 82.0 2.5/16 S-9537 3.379 2.705 1.336 2.318 3.615
45 S-95M45 73.0 56.0 28.0 49.0 82.0 2.3/8 S-9538 3.379 2.777 1.415 2.397 3.694
46 S-95M46 73.0 56.0 28.0 49.0 82.0 2.7/16 S-9539 3.379 2.850 1.415 2.397 3.694
47 S-95M47 73.0 56.0 28.0 49.0 82.0 2.1/2 S-9540 3.379 2.922 1.493 2.475 3.772
48 S-95M48 77.0 56.0 28.0 49.0 82.0 2.9/16 S-9541 3.379 2.994 1.493 2.475 3.772
49 S-95M49 77.3 56.0 28.0 51.0 84.0 2.5/8 S-9542 3.379 3.066 1.493 2.475 3.772
50 S-95M50 78.0 56.0 28.0 51.0 84.0 2.11/16 S-9543 3.379 3.134 1.572 2.554 3.851
51 S-95M51 78.0 56.0 30.0 53.0 86.0 2.3/4 S-9544 3.379 3.211 1.572 2.554 3.851
52 S-95M52 82.0 56.0 30.0 53.0 86.0 2.13/16 S-9545 3.379 3.279 1.572 2.554 3.851
54 S-95M54 82.0 56.0 30.0 53.0 86.0 2.7/8 S-9546 3.379 3.356 1.572 2.663 3.929
55 S-95M55 86.0 56.0 34.0 59.0 92.0 2.15/16 S-9547 3.379 3.423 1.650 2.711 4.008
56 S-95M56 86.0 56.0 34.0 59.0 92.0 3 S-9548 3.379 3.496 1.650 2.711 4.008
57 S-95M57 88.0 86.0 34.0 59.0 92.0 3.1/16 S-9549 3.379 3.572 1.650 2.711 4.008
58 S-95M58 88.0 86.0 34.0 59.0 92.0 3.1/8 S-9550 3.379 3.640 1.650 2.711 4.008
59 S-95M59 88.0 86.0 34.0 59.0 92.0 3.1/4 S-9552 3.379 3.785 1.729 2.947 4.244
60 S-95M60 88.0 86.0 36.0 61.0 94.0 3.5/16 S-9553 4.912 3.862 1.807 3.026 4.322
61 S-95M61 92.3 86.0 36.0 61.0 94.0 3.3/8 S-9554 5.039 3.385 1.850 3.149 4.921
62 S-95M62 93.5 86.0 34.0 59.0 92.0 3.1/2 S-9556 5.118 3.385 1.850 3.149 4.921
65 S-95M65 97.3 86.0 38.0 63.0 96.0 3.5/8 S-9558 5.275 3.385 1.968 3.149 4.921
67 S-95M67 99.8 86.0 38.0 63.0 96.0 3.3/4 S-9560 5.354 3.385 2.125 3.149 4.921
70 S-95M70 104.0 86.0 40.0 65.0 98.0
3.7/8 S-9562 5.433 3.385 2.125 3.149 4.921
73 S-95M73 107.0 86.0 40.0 67.0 100.0
4 S-9564 5.511 3.385 2.125 3.149 4.921
75 S-95M75 107.0 86.0 42.0 69.0 102.0
76 S-95M76 111.0 86.0 42.0 69.0 102.0
80 S-95M80 116.0 86.0 42.0 69.0 102.0
 #5
IMPACT SOCKETS SPLINE
DRIVE

METRIC DEEP # 5 SPLINE FRACTIONAL DEEP # 5 SPLINE

A/F MODEL D1 D2 T C OAL A/F MODEL D1 D2 T C OAL
mm NO. mm mm mm mm mm inch NO. inch inch inch inch inch
21 S-95M21L 48.0 56.0 14.0 115.0 160.0 3/4 S-9512L 1.889 2.362 0.551 4.527 6.299
22 S-95M22L 48.0 56.0 14.0 115.0 160.0 13/16 S-9513L 1.889 2.362 0.551 4.527 6.299
23 S-95M23L 48.0 56.0 14.0 115.0 160.0 7/8 S-9514L 1.889 2.362 0.551 4.527 6.299
24 S-95M24L 50.0 56.0 16.0 115.0 160.0 15/16 S-9515L 1.968 2.362 0.629 4.527 6.299
25 S-95M25L 50.0 56.0 16.0 115.0 160.0 1 S-9516L 1.968 2.362 0.629 4.527 6.299
26 S-95M26L 52.0 56.0 16.0 115.0 160.0 1.1/16 S-9517L 2.047 2.362 0.629 4.527 6.299
27 S-95M27L 52.0 56.0 16.0 115.0 160.0 1.1/8 S-9518L 2.047 2.362 0.629 4.527 6.299
28 S-95M28L 52.0 56.0 16.0 115.0 160.0 1.3/16 S-9519L 2.125 2.362 0.826 4.527 6.299
29 S-95M29L 54.0 56.0 16.0 115.0 160.0 1.1/4 S-9520L 2.362 2.362 0.826 4.527 6.299
30 S-95M30L 54.0 56.0 21.0 115.0 160.0 1.5/16 S-9521L 2.362 2.362 0.826 4.527 6.299
31 S-95M31L 60.0 56.0 21.0 115.0 160.0 1.3/8 S-9522L 2.362 2.362 0.826 4.527 6.299
32 S-95M32L 60.0 56.0 21.0 115.0 160.0 1.7/16 S-9523L 2.480 2.362 0.984 4.527 6.299
33 S-95M33L 60.0 56.0 21.0 115.0 160.0 1.1/2 S-9524L 2.480 2.362 0.984 4.527 6.299
34 S-95M34L 60.0 56.0 21.0 115.0 160.0 1.9/16 S-9525L 2.637 2.362 0.984 4.527 6.299
35 S-95M35L 60.0 56.0 21.0 115.0 160.0 1.5/8 S-9526L 2.637 2.362 1.102 4.527 6.299
36 S-95M36L 63.0 56.0 25.0 115.0 160.0 1.11/16 S-9527L 2.637 2.362 1.102 4.527 6.299
37 S-95M37L 63.0 56.0 25.0 115.0 160.0 1.3/4 S-9528L 2.874 2.362 1.102 4.527 6.299
38 S-95M38L 63.0 56.0 25.0 115.0 160.0 1.13/16 S-9529L 2.874 2.362 1.102 4.527 6.299
39 S-95M39L 67.0 56.0 25.0 115.0 160.0 1.7/8 S-9530L 2.874 2.362 1.102 4.527 6.299
40 S-95M40L 67.0 56.0 25.0 115.0 160.0 1.15/16 S-9531L 2.874 2.362 1.102 4.527 6.299
41 S-95M41L 67.0 56.0 28.0 115.0 160.0 2 S-9532L 3.228 2.362 1.102 4.527 6.299
42 S-95M42L 67.0 56.0 28.0 115.0 160.0 2.1/16 S-9533L 3.228 2.362 1.102 4.527 6.299
43 S-95M43L 67.0 56.0 28.0 115.0 160.0 2.1/8 S-9534L 3.228 2.362 1.102 4.527 6.299
44 S-95M44L 73.0 56.0 28.0 115.0 160.0 2.3/16 S-9535L 3.228 2.362 1.181 4.527 6.299
45 S-95M45L 73.0 56.0 28.0 115.0 160.0 2.1/4 S-9536L 3.464 3.385 1.181 4.527 6.299
46 S-95M46L 73.0 56.0 28.0 115.0 160.0 2.5/16 S-9537L 3.464 3.385 1.181 4.527 6.299
47 S-95M47L 73.0 56.0 28.0 115.0 160.0 2.3/8 S-9538L 3.464 3.385 1.259 4.527 6.299
48 S-95M48L 73.0 56.0 28.0 115.0 160.0 2.7/16 S-9539L 3.464 3.385 1.259 4.527 6.299
49 S-95M49L 73.0 56.0 28.0 115.0 160.0 2.1/2 S-9540L 3.937 3.385 1.259 4.527 6.299
50 S-95M50L 82.0 56.0 28.0 115.0 160.0 2.9/16 S-9541L 3.937 3.385 1.496 4.527 6.299
51 S-95M51L 82.0 56.0 28.0 115.0 160.0 2.5/8 S-9542L 3.937 3.385 1.496 4.527 6.299
52 S-95M52L 82.0 56.0 28.0 115.0 160.0 2.11/16 S-9543L 3.937 3.385 1.496 4.527 6.299

IMPACT ACCESSORIES
REGULAR EXTENSIONS
OAL MODEL SHANK DIA HEAD DIA
mm (inch) NO. mm (inch) mm (inch)

200 (8") E9508

42.0 (1.653) 60.0 (2.362)
381 (15") E9515

SQUARE ADAPTORS
MODEL HEAD DIA OAL
SIZE
NO. mm (inch) mm (inch)

# 5 F X 1" M A9516 90.0 (3.543)

60.0 (2.362)
# 5 F X 1.1/2" M A9524 100.0 (3.937)

UNIVERSAL JOINT
SPLINE MODEL DIA OAL
DRIVE NO. mm (inch) mm (inch)

#5 # 5 SPLINE 60.0 (2.362) 152.0 (6.000)

 SOCKET ACCESSORIES

REVERSIBLE RATCHETS
SQUARE MODEL APP. Wt.
DRIVE NO. OAL Kg.

3/8 PRH38 220 0.58

1/2 PRH50 290 0.65
3/4 PRH75 500 2.80
1 PRH100 610 4.30

RATCHET ADAPTORS
SQUARE MODEL APP. Wt.
DRIVE NO. OAL Kg.
1/2 PRA50 75 0.20
3/4 PRA75 100 0.45
1 PRA100 117 0.95

INDUSTRIAL T-HANDLE
SQUARE MODEL APP. Wt.
DRIVE NO. OAL Kg.
3/8 PTH38 250 0.35
1/2 PTH50 300 0.62
3/4 PTH75 500 2.40
1 PTH100 750 4.95
1.1/2 PTH150 920 15.80

SWIVEL HANDLE
SQUARE MODEL APP. Wt.
DRIVE NO. OAL Kg.

3/8 PSH38 270 0.30

1/2 PSH50 380 0.60
3/4 PSH75 530 2.60
1 PSH100 800 4.55

BALL TYPE UNIVERSAL JOINT

SQUARE MODEL APP. Wt.
DIA
DRIVE NO. OAL Kg.
1/2 UJ08B 30 68 0.25
3/4 UJ12B 44 85 0.55
1 UJ16B 62 110 1.15

SQUARE COUPLERS
SQUARE MODEL APP. Wt.
DRIVE NO. OAL Kg.

3/8 PSC38 35 0.02

1/2 PSC50 45 0.05
3/4 PSC75 50 0.13
1 PSC100 80 0.40
 B

B
CASTELLATED SOCKETS
OD

OD Max. outside dia. socket end

W/O S Without skirt
S Skirted
B Bore dia.

FRACTIONAL 1” SQ. DRIVE FRACTIONAL 1.1/2” SQ. DRIVE

NOMINAL MODEL OD OAL (W/O S) OAL (S) B NOMINAL MODEL OD OAL (W/O S) OAL (S) B
SIZE NO. inch inch inch inch SIZE NO. inch inch inch inch
1.1/4 CS1620 2.1/4 2 3.1/2 1.1/8 2.1/4 CS2436 3.1/2 2.3/8 4.1/8 2.1/8
1.3/8 CS1622 2.3/4 2 3.3/4 1.1/4 2.1/2 CS2440 3.7/8 2.3/8 4.1/8 2.3/8
1.1/2 CS1624 2.3/4 2 4 1.3/8 2.3/4 CS2444 4.1/4 2.5/8 5.1/2 2.5/8
1.3/4 CS1628 3 2.1/8 4.1/8 1.5/8 3 CS2448 4.5/8 2.5/8 5.1/2 2.7/8
2 CS1632 3.1/8 2.1/8 4.1/8 1.7/8 3.1/2 CS2456 5.3/8 2.7/8 6.1/2 3.3/8
2.1/4 CS1636 3.1/2 2.1/4 4.3/4 2.1/8 4 CS2464 6.1/8 2.7/8 7 3.7/8
2.1/2 CS1640 3.7/8 2.1/4 4.3/4 2.3/8 4.1/2 CS2472 6.7/8 3.1/8 7.3/4 4.3/8
2.3/4 CS1644 4.1/4 2.1/2 5.3/8 2.5/8 5 CS2480 7.5/8 3.1/8 7.7/8 4.7/8
3 CS1648 4.5/8 2.1/2 5.3/8 2.7/8 5.1/2 CS2488 8.3/8 3.3/8 8.7/8 5.3/8
3.1/2 CS1656 5.3/8 2.3/4 6.3/8 3.3/8 6 CS2496 9.1/4 3.3/8 9.3/8 5.7/8
4 CS1664 6.1/8 2.3/4 6.7/8 3.7/8 6.1/2 CS24104 10 3.1/2 9.1/2 6.3/8
4.1/2 CS1672 6.7/8 3 7.5/8 4.3/8 7 CS24112 10.5/8 3.1/2 10.3/8 6.7/8

FRACTIONAL 2.1/2” SQ. DRIVE FRACTIONAL 3.1/2” SQ. DRIVE

NOMINAL MODEL OD OAL (W/O S) OAL (S) B NOMINAL MODEL OD OAL (W/O S) OAL (S) B
inch NO. inch inch inch inch inch NO. inch inch inch inch
2.3/4 CS40044 4.1/4 3.1/4 6.1/8 2.5/8 4.1/2 CS56072 6.7/8 5 9.5/8 4.3/8
3 CS40048 4.5/8 3.1/4 6.1/8 2.7/8 5 CS56080 7.5/8 5 9.3/4 4.7/8
3.1/2 CS40056 5.3/8 3.1/2 7.1/8 3.3/8 5.1/2 CS56088 8.3/8 5.1/4 10.3/4 5.3/8
4 CS40064 6.1/8 3.1/2 7.5/8 3.7/8 6 CS56096 9.1/4 5.1/4 11 5.7/8
4.1/2 CS40072 6.7/8 3.3/4 8.3/8 4.3/8 6.1/2 CS26104 10 5.5/8 11.1/2 6.3/8
5 CS40080 7.5/8 3.3/4 8.1/2 4.7/8 7 CS56112 10.5/8 5.5/8 12 6.7/8
5.1/2 CS40088 8.3/8 4 9.1/2 5.3/8
6 CS40096 9.1/4 4 10 5.7/8 Note: Skirted Sockets with long clearance for stud
6.1/2 CS40104 10 4.1/8 10.1/2 6.3/8
7 CS40112 10.5/8 4.1/8 11 6.7/8 can be made to specific length against order.
 POWERMASTER ENGINEERS PVT. LTD.
229, Pragati Industrial Estate, 316, N. M. Joshi Marg, Bombay - 400 011. INDIA.
Phone: +91.22.43453100 Fax: +91.22.2307 3761 email: [email protected]

tubeexpanders.com tubecleaners.com impactsocket.com springbalancers.com