Scribd
Upload
56 views

Night Vision Web Cam: Drivers

This document provides information about a night vision web camera, including: - Supported operating systems for drivers are Windows 2000, XP, Vista and Mac OS X 10.4 or later. - The camera has 6 infrared LEDs, 1.3 megapixel video quality, and a built-in microphone. It easily mounts to a PC or notebook. - Features include night vision, video capture up to 640x480 pixels, USB 2.0 interface, and plug-and-play capability.

Uploaded by

Shadab Khan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
56 views

Night Vision Web Cam: Drivers

This document provides information about a night vision web camera, including: - Supported operating systems for drivers are Windows 2000, XP, Vista and Mac OS X 10.4 or later. - The camera has 6 infrared LEDs, 1.3 megapixel video quality, and a built-in microphone. It easily mounts to a PC or notebook. - Features include night vision, video capture up to 640x480 pixels, USB 2.0 interface, and plug-and-play capability.

Uploaded by

Shadab Khan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

NIGHT VISION WEB CAM

Drivers :  
Win 2000
Driver
Win XP 32/64
Win2K/XP/Vista
Win Vista 32/64
Mac OS X 10.4 or later
Driver MAC OS Mac G4 / G5
QuickTime 6.0 or later

Description :
Use this Webcam in low light environment or even total darkness! This unique
Night Vision web camera has the best features, including 6 infrared LED's, built-
in microphone and amazing 1.3Mps video quality at 640 x 480. You can take
snapshots, create video/audio or use it for video/audio conferencing! This unit
easily mounts to a PC monitor or a notebook. Installation is a snap with the USB
2.0 interface! PC Camera software comes with this camera for viewing images!

 Add video to your favorite instant messenger: Yahoo! Messenger, AOL


Instant MessengerSM (AIM), MSN Messenger Etc.....
 Conduct online video conferences and calls using Windows Messenger or
Microsoft NetMeeting
 Email video and photos easily
 Speak your mind with the built-in microphone

Features :

 6-LED Infrared Night-Vision


 1.3 Megapixels 640x480 video quality
 Video capture: Up to 640x480 pixels
 High speed USB 2.0 interface
 Built-in Microphone
 Metal Body
 Stylish Design
 Simplicity & Ergonomic
 Plug & Play

Specifications :
 1/3 Inch Sensor, 6mm lens, 60 visual angle
 Metal Body
 1.3 MegaPixels 640x480 resolution
 6-LED infrared LED for night vision
 Built-in Audio Microphone
 640 x 480 up to 30 frame / sec (VGA)
 Focus range:3CM-infinity
 Video Format:24-bit RGB
 S/n better than 48dB
 Interface: USB 2.0
 White balance: Auto
 VFW Interface: support dynamic and still image snap
 Dynamic Range better than 72dB
 Built-in image compression
 Automatic white balance
 Automatic color compensated
 Dynamic image E-Mail
 Manual Focus Ring
 Mountable on notebook and PC monitor
Requirements :

 Microsoft Windows 98SE/ME/2000/XP/Vista


 Available USB Port

Technical Details
 6-LED Webcam
 Night Vision Webcam
 Metal Body
 Automatic white balance

Product Description

6-LED Night-Vision USB Webcam COOL THIS IS VERY HIGH QUALITY


Best WebCam(Glass Lens) Focusing range 3mm to infinity Features: 1/3 Inch
Sensor, 6mm lens, 62 visual angle Glass Lens Metal Body 6-LED for night vision
Frame Rate: 320 x 240 up to 30 frame/sec (CIF) Focus range:3CM-infinity Video
Format:24-bit RGB VFW Interface: support dynamic and still image snap
Dynamic Range better than 42dB Built-in image compression Automatic white
balance Automatic color compensated Dynamic image E-Mail Manual Focus Ring
Mountable on notebook and PC monitor Interface: USB System Requirements:
Windows 98SE /ME /2000 /XP Pentium II 350MHz CPU or equivalent 64MB of
RAM, 200MB free hard disk space Available USB port

Trouble-Shooting Guide
System not Recognizing Camera:

Go to Programs->AMCap. If any errors pop-up, just hit okay to clear them.


Under the device menu, do you see “ViMicro Webcam” and “ViMicro
Webcam Audio”?
If both of these devices are present, then the system is recognizing the camera.
If one or none of these devices are present then try the following:

Make sure your webcam is plugged in.


Reboot you computer, go back to AM Cap and check the devices again.
Try plugging the camera into a different USB port. If the camera is plugged
into one of the ports in the front try one of the ports in the rear of the
computer.
Try to uninstall the driver and do a fresh install with any antivirus software
temporarily disabled.

Note: If during the installation you see a preview window with video from the
camera, then the installation was successful.
If you are still having problems when trying to use certain programs, please
contact the vendor of the software you are attempting to use the camera with.
 
Capture Quality:

Image Quality – the focus for the camera is adjustable by housing of the lens.
Turn the housing to the left or the right until the picture is clear.

Framerate:
Under low light situations the framerate of the capture will drop. To obtain the
highest possible framerate from a camera, optimal lighting should be used.
Under suboptimal conditions, quality may be improved by checking the Low
Light checkbox in the camera settings dialog box. 

Plugging in Camera Produce USB Error:


If plugging in the camera on your system produces a USB error

Code 39 for Device status:

If other cameras were installed on the computer at one point and you are
receiving a Code 39 error when you plug in the camera, do the following:
Start Menu -> Run and type in regedit
File -> Export and save a copy of your current registry. Whenever
altering the registry, always save a copy before editing.
Find the key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\
{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}
In the right hand pane find and delete the Upper Filters and Lower Filters
values. (If you cannot readily find them, RIGHT-CLICK on "6BDD1FC6-
810F-11D0-BEC7-08002BE2092F"; then FIND > upper; check the Right
Hand pane... delete upper filters.  Repeat FIND lower; check the Right Hand
pane... delete lower filters. Unplug and plug in the camera again. The error
should be gone. 
 

You might also like