Scribd
Upload
32 views

PROBLEMS - Module 1 - Introduction

Uploaded by

Ake Tupesla
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

PROBLEMS - Module 1 - Introduction

Uploaded by

Ake Tupesla
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

MODULE 1

SOLVED NUMERICAL PROBLEMS


Problem 1: Find the TON when odor is just barely detected in a flask containing 40 ml of
sample water.
A B 200 ml 200
TON    5
Solution: A Sample volume (ml) 40

Problem 2: The BOD6 of a wastewater is determined to be 400 mg/L at 20oC. The k value at
20oC is known to be 0.23 per day. What would be BOD8 value if tests were run at 15oC?
Answer: Solved using MATHCAD, however, can be solved otherwise also.

BODt ,T  BODu 1  exp k T t 

k T  k 20    k 20 1.047
T  20  T  20 

mg 1
Given that: BOD6 20  400 k20  0.23 d
L
BOD6 20 mg
BODu   534.458
 1  exp  k20 6  L

1
k15  k20 1.047( 1520)  0.183 d

BOD8 15  BODu  1  exp  k15 8    410.643


mg
L
Problem 3: 6 ml of wastewater is diluted to 300 ml distilled water in standard BOD bottle. Initial
DO in the bottle is determined to be 8.5 mg/l. DO after 5 days at 20 C is found to be 5 mg/l.
Determine BOD5 of wastewater and compute the ultimate BOD.
Soln. We know,
(DO 0 - DO 5 ) (8.5-5)
BOD 5 = ×(Vw +Vd ) = ×(300)  175 mg/l
Vw 6
-kt
Since BODt = BODu (1- e ) at any particular temperature

-5k -5 0.23


BODu = BOD5 /(1- e ) = 175 / (1- e ) = 256 mg/l.
Problemm 4: A 50 ml
m sample of water has an a initial pH
H of 11.2. Determine thee species annd the
quantity of each species of alkaalinity if the 8.3 equivallence point iis reached aat 8 ml of 0..01 N
H2SO4 and
a 4.5 equiv valence poinnt is reached at 18 ml of 0.01 N H2S SO4.
Answer: Solved usinng MATHCA AD, howeveer, can be sollved otherwiise also.
UNSOLVED PROBLEMS
1. Write a review of India’s environmental legislations directly related to chemical process
industries (use other references also).
2. Write various standards which have to me met for discharge of various types of pollutants
from Pulp and Paper industry.
3. Write various standards which have to me met for discharge of various types of pollutants
from a thermal power plant of 440 MW.
4. Which are the major polluting chemical process industries? Write their major
environmental concerns and affect on the regional and global climate changes.
5. Write full forms of
a. CPCB o. AES
b. MoEF p. ICP
c. BIS q. NDIR
d. EIA r. TOEM
e. BOD s. XRF
f. COD t. ppm
g. TKN u. ppt
h. TDS v. JTU
i. VOC w. NTU
j. TOC x. TON
k. TOCl y. MPN
l. PAN z. PAH
m. HPLC aa. MINAS
n. AAS bb. NAAQS
6. Write short notes on the following:
a. Environmental ethics
b. EIA
c. BOD
d. COD
e. Water quality monitoring
f. TON
g. Alkalinity, its types and significance
h. Fecal indicator bacteria
i. MPN
j. Primary water quality criterion
7. Write in short importance of various physical constituents in wastewaters.
8. Differentiate between the followings:
a. Apparent and true color
b. BOD, COD and TOC
c. Total, dissolved, and suspended solids
d. SPM, RSPM, PM10 and PM2.5
9. Write in brief about various water quality parameters need to be determined to assess the
quality of water.
10. What is air pollution? What are the various sources of air pollution? Classify various
types of air pollutants.
11. Write about particulate matter and their types, sources and effects on environment.
12. Write about gaseous air pollutants, their properties and significance.
13. Fugitive emissions and their sources. What are the various methods for measuring and
controlling fugitive emissions?
14. Write about water use minimization in and out-side process industries. Write about
methods for minimizing boiler water.
15. Explain in detail water recycling and its quality. Write different motivational factors,
benefits and uses of recycled water.
16. The BOD5 of a wastewater is determined to be 150 mg/l at 20oC. The k value at 20oC is
known to be 0.23 per day. What would be BOD8 value if tests were run at 15oC
17. Answer all questions:
i. Forest Conservation Act was passed in the year__________________ .
ii. Ozone is a primary/secondary pollutant. Choose the correct one.
iii. Arsenic can be measured by FTIR/AAS/NMR/HPLC. Choose the correct
one.
iv. Annual ARSENIC maximum concentration in the new NAAQS is ___
ng/m3.
v. Annual PM2.5 maximum concentration in the new NAAQS is ___ µg/m3.
vi. Old notification of EIA was notified in the year
_____________________.
vii. Noise limits for motor-cycle (from at 7.5 metre in dB(A) at the
manufacturing stage) is 70/75/80/85 dB. Choose the correct one.

You might also like