Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

TP1 DATACOM

Introduction: Huawei Certification System

Relying on its strong technical and professional training and certification system
and in accordance with customers of different ICT technology levels, Huawei
certification is committed to providing customers with authentic, professional
certification, and addresses the need for the development of quality engineers that
are capable of supporting Enterprise networks in the face of an ever changing ICT
industry. The Huawei certification portfolio for routing and switching (R&S) is
comprised of three levels to support and validate the growth and value of customer
skills and knowledge in routing and switching technologies.

The Huawei Certified Network Associate (HCIA) certification level validates the skills
and knowledge of IP network engineers to implement and support small to
medium-sized enterprise networks. The HCIA certification provides a rich
foundation of skills and knowledge for the establishment of such enterprise
networks, along with the capability to implement services and features within
existing enterprise networks, to effectively support true industry operations.

HCIA certification covers fundamentals skills for TCP/IP, routing, switching and
related IP network technologies, together with Huawei data communications
products, and skills for versatile routing platform (VRP) operation and management.

The Huawei Certified Network Professional (HCIP-R&S) certification is aimed at

enterprise network engineers involved in design and maintenance, as well as
professionals who wish to develop an in depth knowledge of routing, switching,
network efficiency and optimization technologies. HCIP-R&S consists of three units
including Implementing Enterprise Routing and Switching Network (IERS),
Improving Enterprise Network Performance (IENP), and Implementing Enterprise
Network Engineering Project (IEEP), which includes advanced IPv4 routing and
switching technology principles, network security, high availability and QoS, as well
as application of the covered technologies in Huawei products.

The Huawei Certified Internet Expert (HCIE-R&S) certification is designed to imbue

engineers with a variety of IP network technologies and proficiency in maintenance,
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

for the diagnosis and troubleshooting of Huawei products, to equip engineers with
in-depth competency in the planning, design and optimization of large-scale IP
networks.

Reference Icons
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

1. Module 1 Establishing Basic Networks with eNSP

Lab 1-1 Building Basic IP Networks

Learning Objectives

As a result of this lab section, you should achieve the following tasks:
• Set up and navigate the eNSP simulator application.
• Establish a simple peer-to-peer network in eNSP.
• Perform capture of IP packets using Wireshark within eNSP.

3
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

The fundamental network behavior can be understood through the application

of packet capture tools to the network. The use of Huawei’s simulator platform
eNSP is capable of supporting both the implementation of technologies and the
capture of packets within the network to provide a comprehensive knowledge
of IP networks.

Tasks

Step 1 Install eNSP

1. Login website of eNSP：

https://support.huawei.com/enterprise/en/tool/ensp-

TL1000000015/23917110

2. Download the latest version of eNSP

3. Please refer to the software installation guide below to install eNSP in local
PC.

Then engineer can practice lab with AR, Router, S57, S37, USG5500, AC, AP .

If the engineer want to practice lab with USG6000V, CE, NE40, NE5000E,
4
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

NE9000, CX, please follow Step4

4. Enable USG6000V, CE, NE40, NE5000E, NE9000, CX devices in eNSP:

1） For example, if you want to enable USG6000V in eNSP, you should
download the corresponding mirror file.

2） Select USG6000V into new project of eNSP, then right click “start”of
USG6000V :

3） The dialog box of “import package” will show up:

5
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

4） Click "Browse" - and import the downloaded mirror files, then engineer
can practice lab with USG6000V.

5） If the engineer want to practice CE, NE40, NE5000E, NE9000, CX, please
repeat step 4-1) --- 4).

Step 2 Initiate eNSP

This step introduces how to start and navigate the eNSP simulator application
for rapid development of TCP/IP knowledge and familiarity with network
operation. If eNSP is not available, please inform the course instructor
After launching eNSP, the following application user interface will be presented.
The left panel houses the icons that represent the various products and devices
that are supported within eNSP, while the central panel provides lab examples
for practice scenarios.

6
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

After launching eNSP, users should select the New operator in the top left
corner of the application window to begin a new lab session.
The user will be presented with a canvas on which to establish a network
topology for practice and analysis of network behavior. In this example a simple
peer-to-peer network using two end systems is to be established.

Step 3 Build a Topology

Select the End Devce icon in the top left panel to reveal a list of end devices that
can be applied. Select the Laptop icon and drag it to the canvas, release the icon
to place it on the canvas.

7
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

The same action should be taken to position a second laptop on the canvas for
establishing the peer-to-peer network topology.

8
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

The devices on the canvas represent simulated end systems that can be used to
emulate real world operations.

Step 4 Establish a physical medium

Select the connections icon from the upper left panel to reveal a list of media
that can be applied to the topology. Select the copper (Ethernet) medium from
the list. Once the icon has been clicked, the cursor will represent a connector to
show the current role of the cursor as a connector. Click on the client device to
reveal a list of port interfaces supported by the simulated device. For the client
click the option forGigabitEthernet 0/0/1 to apply the connection.

Once this has been achieved, click on the peering device to apply the opposite
end of the medium to the end system. Again select the interfaceGigabitEthernet
0/0/1 to establish the medium between the two devices and complete the
construction of a peer-to-peer topology.

9
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

The establishment of a point-to-point network reveals a connection with two

red dots on the medium that represent the current state of the interfaces to
which the medium connects as down.

Step 5 Access the end system settings

Select the end system and use the right click option to display a properties
menu. The settings option should be selected in order to display the current
system settings for the end system devices.

10
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

The settings option in the properties window reveals a set of four tabs for
establishment of basic configuration, the device command line interface,
multicast traffic generator configuration, and UDP packet generator
configuration.

Step 6 Configure the end system

Ensure the Basic Config tab is selected and enter a host name in the Host Name
field window. Ensure the IPv4 configuration is currently set to static and
configure an IP address in the IP address window. It is recommended that the
address (together with the subnet mask) be configured as shown in the below
example. Once this has been configured, click the Apply button in the bottom
left corner of the window before closing with the x in the top left corner of the
CLIENT 1 window.

The same process is required for CLIENT2. It is recommended that initially the
IP address 192.168.1.2 be configured, with a subnet mask of 255.255.255.0.
The basic configuration enables peer-to-peer communication to be supported
between the two end systems.
11
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

Step 7 Initiate the end system devices

The devices can be activated using one of two methods. The first involves using
the right click option to open the properties menu and select start for the
individual icons. The alternative involves dragging the cursor over the icons (as
shown) to highlight multiple devices and using the right click settings option
start multiple devices simultaneously.

Once the devices are online and active, it is common to notice a change in the
status of the connectors through a switch in the colour of the red dot on the
medium to green, highlighting that the status of the connectors is now up.

12
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

Once the devices within the network topology are operational, it is possible to
begin to monitor the flow of traffic that is carried over the medium and the
interfaces via which the devices have established a physical peering.

Step 8 Implement the capture of packets on an interface

Select the device to for whose interface is to be monitored and use the right
click option to display the settings menu. Highlight the capture data option to
reveal a list of interfaces that belong to the device and are available for
observation by the packet capture tool. Select the interface from the list that is
to be monitored.

The selection of an interface will result in the activation of the Wireshark packet
capture tool for the selected interface. If additional interfaces are to be
monitored, separate instances of the same packet capture tool will be activated.

13
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

Depending on the devices being monitored, the packet capture tool may or may
not begin to generate packet capture results for all traffic that passes through
the selected interface. In the case of the peer-to-peer relationship, it will be
necessary to generate some traffic.

Step 9 Generate traffic on the interface

Open the command window on the client by either double clicking the client
icon and selecting the Command tab, or alternatively use the right click option
to enter the properties menu and select settings from which point the
Command tab can be selected.
The most basic means for generating traffic is through the ping command. This
can be achieved by entering ping <ip address> where the IP address refers to
the address of the peer.

The generation of traffic will be confirmed by the resulting output in which case
the number of packets transmitted are shown to also be received.

14
Dr. Jihen Bokri
Preparation for DATACOM Huawei certification ISET Bizerte 2020/2021

Following the generation of traffic, the resulting traffic flow shall be captured
by the packet capture tool and can be used for observation of the behavior of
protocols within the IP network along with details of the various layers as
referenced in the OSI reference model.

Step 10 Observe the captured traffic flow

An instance of the Wireshark packet capture tool should currently be active

following the action to capture data on the client interface. Maximize the active
window to observe the results of the packet capture process.

The Wireshark application contains many functions for management of the

packet capture process. One of the more common functions includes the filter
function to isolate the packet capture display to a select group of packets or
protocols. This can be achieved using the filter field below the menu bar. The
simplest filter method involves entering the protocol name (in lower case) and
pressing Enter. In the given example packets for two protocols have been
captured, entering either icmp, or arp into the filter window will result in only
the protocol entered in the filter field being displayed in the output.
The packet capture tool consists of three panels, to show the list of packets, a
breakdown of the content of each packet and finally display the equivalent data
format of the packet. The breakdown is invaluable for understanding the format
of protocol packets and displays the details for protocols as referenced at each
layer of the OSI reference model.

15
Dr. Jihen Bokri