Scribd
Upload
159 views9 pages

WINCC View SOLAR INVERTER

The software installation package contains setup.exe. Double clicking setup.exe installs the software by default to C:\Program Files\WINCC, selecting the terms and conditions and clicking Install. Once installed, an icon appears on the desktop. The running software has 3 areas - a settings area, shortcut area, and data display area. Based on the selection of Inverter or Charger in the data display area, the other areas handle the corresponding device functions and parameters.

Uploaded by

Khaled Bellegdy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views9 pages

WINCC View SOLAR INVERTER

The software installation package contains setup.exe. Double clicking setup.exe installs the software by default to C:\Program Files\WINCC, selecting the terms and conditions and clicking Install. Once installed, an icon appears on the desktop. The running software has 3 areas - a settings area, shortcut area, and data display area. Based on the selection of Inverter or Charger in the data display area, the other areas handle the corresponding device functions and parameters.

Uploaded by

Khaled Bellegdy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

本软件安装包有如下文件

The installation package of this software include the following documents:

双击 setup.exe 安装软件,
Double click the setup.exe to install this software

选择路径(默认为 C:\Program Files\WINCC)确认条款点击 Install,等待安装完


成,安装完成后出现如下画面
Choosing the path(default path is D:\Program Files\WINCC) click Install to
make sure the clause, waiting for the installation. The finished picture is as
below.
点击 Run 运行软件,或者点击 Finish 退出安装
Click Run to operate the software, or just click Finish to log out installation.

桌面会出现软件图标
The desktop will show the above icon

运行软件如下图,除了标题区,分为 3 个区;
The running software is shown as below picture. There is 3 area except the title area
1 设置命令区, setting up order area
2 快捷命令区 shortcut order area
3 数据展示区 data display area

1,2 区域根据显示区(3)的选择(Inverter\Charger)会处理对应设备的事务
According to the choice(Inverter\ Charger) of area 3, the 1 and 2 area will deal with the
problems of the relative equipment.
 下图区域为 Inverter
Below picture is Inverter region
 下图区域为 Charger
Below picture is Charger region

区域 1 设置命令区说明

Region 1 Introduction of the setting up order area


在验证了管理员后,Parameters setting 才可以正常使用,否则无法点击子项目.管理员默认密
码为 admin
The Parameters Setting can use only after verifying the administrator, otherwise, the
sub-items can not be clicked. The default password of the administrator is admin

在区域 3 数据展示说明中第 4 条有说明


There is instruction in number4 data show part in region 3
1. 选择 Inverter 的情况下
Under the institution Inverter
点击菜单’Prarameters setting’会有如下子菜单弹出
There will be the belowed sub-menu when click the menu Parameters Setting

点击 System Settings1 弹出设置页面 1


There will be the belowed page 1 when click System Setting 1

点击 System Settings2 弹出设置页面 2


There will be the belowed page when click System Setting 2

2. 选择 Charger 的情况下
Under the situation Charger
点击菜单’Prarameters setting’会有如下子菜单弹出
There will be the sub-menu when click the menu Parameters Setting

点击 System Settings1 弹出设置页面 1


There will be the setting up page 1 when click System Setting 1
区域 2 快捷命令区

Region 2 Shortcut order area


1. 按钮 1:用于显示\导出已记录的数据
Button 1: Show or derived the recorded data
 (选择 Charger 情况下)
(under the situation of choosing Charger)
点击按钮 1 会出下如下窗口
It will appear the following window when click button 1

 Form 选择下 under the situation of choosing Form


1. Clear data 用于清除所有已记录数据
Clear data is to clear all the recorded data
2. Export to excel 用于把数据导出到 excel 表格
Export to excel is to derive data to excel form
 Report 选择下 under the situation of choosing Report
1. 用于显示各重要数据的柱状图
The bar chart is to show all the important data
只提供 Cumulative charge 数据报告,在下方选择要查看的方式(年\
月\日)和要查看的日期
Only providing Cumulative charge data report, and choosing the
checking method(year\month\day) and checking date in the
bottom.
 (选择 Inverter 情况下)(under the situation of choosing Inverter)
点击按钮 1 会出下如下窗口
It will appear the following window when click button 1

 Form 选择下 under the situation of choosing Form


1. Clear data 用于清除所有已记录数据
Clear data is to clear all the recorded data
2. Export to excel 用于把数据导出到 excel 表格
Export to excel is to derive data to excel form

 Report 选择下 under the situation of choosing Report


1. 用于显示各重要数据的柱状图
The bar chart is to show all the important data
在左侧栏选择要查看的数据,在下方选择要查看的方式(年\月\日)和
要查看的日期
Choosing the data in the left side, and choosing the checking
method(year\month\day) and checking date in the bottom.
2. 按钮 2:用于记录当前数据,按一下记录一次 选择 Inverter 或 Charger 功能相同,分别记录
所选择设置的数据
Button 2: it is to record the latest data, one press one record. The function will be the same in
choosing Inverter or Charger. To record the data that has been chosen.

3. 按钮 3：用于设置相关参数, 选择 Inverter 或 Charger 功能相同


Button 3: it is to set up the relative parameters, and function will be same in choosing
Inverter or Charger
点击按钮 3 会出现如下参数设置窗口
It will appear the following window to set up parameters when click button3

a) Serial port parameters 用于设置串口(com or serialport)参数,一般情况只需要选择\


设置 PortName,其它参数属于默认设置
Serial port parameters is to set up com or serial port parameters. Only need to
choose\set up port name in usual, the others are default.
b) Soft parameters 用于设置数据记录相关参数 soft parameters is to set up data to
record the relative parameters
1) Auto Record 用于选择是否自动记录采集到的数据
Auto record is to choose whether it will record the collected data
2) Auto Record Interval 用于设置自动记录时间间隔,单位分钟
Auto Record Interval is to set up time interval of auto recording, unit is minute
3) Get Data Interval 用于设置采集数据间隔(1 次成功采集到下次成功采集时间
间隔,所以两次成功采集之间时间间隔会大于设置的值)
Get Data Interval is to set up the interval of collecting data(the interval between the
first successfully collecting data and the second, the time interval will greater than
the set default data )
c) Select type of machine:用于选择设备型号(不同型号数据获取方式不一样,型号选择
错误会导致无法获取数据或者数据获取错误)
Select type of machine: it is to choose the machine model number (collecting data
method will be different according to different model number. It can not collect data or
collect wrong data when choosing the wrong model number)
 1800/3000 代表 PV1800 和 PV3000
1800\3000 stands for PV1800 and PV3000
 3500 代表 PV3500
3500 stands for PV3500

4. 按钮 4:用于管理员登录,只有输入正确的密码,区域一才能工作(默认密码 admin)
选择 Inverter 或 Charger 功能相同
Button 4: it is for administrator login. Region 1 can work only with the right password
(default password is admin)
Function will be the same when choosing Inverter or Charger

5. App states area 用于显示当前设备地址


App states area is to show the state of app

选择 Inverter 或 Charger 功能相同


Function will be the same for choosing Inverter or Charger
6. 错误提示区:
Error region:On “App states area”right
选择 Inverter 或 Charger 功能相同
Function will be the same when choosing Inverter or Charger.
正常情况下不可见,位于 Text area 后方(出现程序相关错误的时候会以红字提示错误,及
错误情况) it will be invisible under normal condition, located in the rear of Text area(red
letter will indicate the error and wrong situation when there is wrong procedure)

区域 3 数据展示区

Region 3 Data display area


用于展示不同设备的各项属性
To display properties of different machine
1. 选择 Inverter,如下图展示
Inverter: shown as below

2. 选择 Charger,如下图展示
Charger: shown as below

You might also like