Lab – Working with Text Files in the CLI

Introduction
In this lab, you will get familiar with Linux command line text editors and configuration files.

Required Resources
 CyberOps Workstation Virtual Machine

Part 1: Graphical Text Editors

Before you can work with text files in Linux, you must get familiar with text editors.
Text editors are one of the oldest categories of applications created for computers. Linux, like many other
operating systems, has many different text editors, with various features and functions. Some text editors
include graphical interfaces, while others are only usable via the command line. Each text editor includes
a feature set designed to support a specific work scenario. Some text editors focus on the programmer
and include features such as syntax highlighting, bracket matching, find and replace, multi-line Regex
support, spell check, and other programming-focused features.
To save space and keep the virtual machine lean, the Cisco CyberOps VM only includes SciTE as
graphical text editor application. SciTE is a simple, small and fast text editor. It does not have many
advanced features but it fully supports the work done in this course.
Note: The choice of text editor is a personal one. There is no such thing as a best text editor. The best
text editor is the one that you feel most comfortable with and works best for you.

Step 1: Open SciTE from the GUI

a. Log on to the CyberOps VM as the user analyst using the password cyberops. The account analyst
is used as the example user account throughout this lab.
b. On the top bar, navigate to Applications > CyberOPS > SciTE to launch the SciTE text editor.
c. SciTE is simple but includes a few important features: tabbed environment, syntax highlighting and
more. Spend a few minutes with SciTE. In the main work area, type or copy and paste the text below:
“Space, is big. Really big. You just won't believe how vastly, hugely, mindbogglingly big it is. I mean,
you may think it's a long way down the road to the chemist, but that's just peanuts to space.”
― Douglas Adams, The Hitchhiker’s Guide to the Galaxy
d. Click File > Save to save the file. Notice that SciTE attempts to save the file to the current user’s
home directory, which is analyst, by default. Name the file space.txt and click Save.
e. Close SciTE by clicking the X icon on the upper right side of the window and then reopen SciTE.
f. Click File > Open… and search for the newly saved file, space.txt.
Could you immediately find space.txt? ____________________________________________
g. Even though SciTE is looking at the correct directory (/home/analyst), space.txt is not displayed. This
is because SciTE is looking for known extensions and .txt is not one of them. To display all files, click
the dropdown menu at the bottom of the Open File window and select All Files (*).
h. Select space.txt to open it.
Note: While the Linux file systems do not rely on extensions, some applications such as SciTE may
attempt to use them to identify file types.
i. Close space.txt when finished.

Step 2: Open SciTE from the Terminal.

a. Alternatively, you can also open SciTE from the command line. Click the terminal icon located in the
Dock at the bottom. The terminal emulator opens.

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 10
Lab – Working with Text Files in the CLI

b. Type ls to see the contents of the current directory. Notice space.txt is listed. This means you do not
have to provide path information to open the file.
c. Type scite space.txt to open SciTE. Note that this will not only launch SciTE in the GUI, but it will
also automatically load the space.txt text file that was previously created.
[analyst@secOps ~]$ scite space.txt
d. Notice that while SciTE is open on the foreground, the terminal window used to launch it is still open
in the background. In addition, notice that the terminal window used to launch SciTE no longer
displays the prompt.
Why the prompt is not shown?
_________________________________________________________________________________
___
_________________________________________________________________________________
___
e. Close this instance of SciTE by either clicking the X icon as before, or by switching the focus back to
the terminal window that launched SciTE and stopping the process. You can stop the process by
pressing CTRL+C.
Note: Starting SciTE from the command line is helpful when you want to run SciTE as root. Simply
precede scite with the sudo command, sudo scite.
f. Close SciTE and move on to the next section.

Part 2: Command Line Text Editors

While graphical text editors are convenient and easy to use, command line-based text editors are very
important in Linux computers. The main benefit of command line-based text editors is that they allow for
text file editing from a remote shell on a remote computer.
Consider the following scenario: a user must perform administrative tasks on a Linux computer but is not
sitting in front of that computer. Using SSH, the user starts a remote shell to the aforementioned
computer. Under the text-based remote shell, the graphical interface may not be available which makes it
impossible to rely on graphical text editors. In this type of situation, text-based text editors are crucial.
Note: This is mainly true when connecting to remote, headless servers that lack a GUI interface.
The Cisco CyberOps VM includes a few command line-based text editors. This course focuses on nano.
Note: Another extremely popular text editor is called vi. While the learning curve for vi is considered
steep, vi is a very powerful command line-based text editor. It is included by default in almost all Linux
distributions and its original code was first created in 1976. An updated version of vi is named vim which
stands for vi-improved. Today most vi users are actually using the updated version, vim.
Due to the lack of graphical support, nano (or GNU nano) can be controlled solely through the keyboard.
CTRL+O saves the current file; CTRL+W opens the search menu. GNU nano uses a two-line shortcut
bar at the bottom of the screen, where a number of commands for the current context are listed. After
nano is open, press CTRL+G for the help screen and a complete list.
a. In the terminal window, type nano space.txt to open the text file created in Part 1.
[analyst@secOps ~]$ nano space.txt
b. nano will launch and automatically load the space.txt text file. While the text may seem to be
truncated or incomplete, it is not. Because the text was created with no return characters and line
wrapping is not enabled by default, nano is displaying one long line of text.
Use the Home and End keyboard keys to quickly navigate to the beginning and to the end of a line,
respectively.

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 10
Lab – Working with Text Files in the CLI

What character does nano use to represent that a line continues beyond the boundaries of the
screen?
_________________________________________________________________________________
___
_________________________________________________________________________________
___
c. As shown on the bottom shortcut lines, CTRL+X can be used to exit nano. nano will ask if you want
to save the file before exiting (‘Y’ for Yes, or N for ‘No’). If ‘Y’ is chosen, you will be prompted to press
enter to accept the given file name, or change the file name, or provide a file name if it is a new
unnamed document.
d. To control nano, you can use CTRL, ALT, ESCAPE or the META keys. The META key is the key on
the keyboard with a Windows or Mac logo, depending on your keyboard configuration.
e. Navigation in nano is very user friendly. Use the arrows to move around the files. Page Up and Page
Down can also be used to skip forward or backwards entire pages. Spend some time with nano and
its help screen. To enter the help screen, press CTRL+G.

Part 3: Working with Configuration Files

In Linux, everything is treated as a file. The memory, the disks, the monitor output, the files, the
directories; from the operating system standpoint, everything is a file. It should be no surprise that system
itself is configured through files. Known as configuration files, they are usually text files and are used by
various applications and services to store adjustments and settings for that specific application or service.
Practically everything in Linux relies on configuration files to work. Some services have not one but
several configuration files.
Users with proper permission levels use text editors to change the contents of such configuration files.
After the changes are made, the file is saved and can be used by the related service or application. Users
are able to specify exactly how they want any given application or service to behave. When launched,
services and applications check the contents of specific configuration files and adjust their behavior
accordingly.

Step 1: Locating Configuration Files

The program author defines the location of configuration for a given program (service or application).
Because of that, the documentation should be consulted when assessing the location of the configuration
file. Conventionally however, in Linux, configuration files that are used to configure user applications are
often placed in the user’s home directory while configuration files used to control system-wide services
are placed in the /etc directory. Users always have permission to write to their own home directories and
are able to configure the behavior of applications they use.
a. Use the ls command to list all the files in the analyst home directory:
[analyst@secOps ~]$ ls –l
total 20
drwxr-xr-x 2 analyst analyst 4096 Sep 26 2014 Desktop
drwx------ 3 analyst analyst 4096 Jul 14 11:28 Downloads
drwxr-xr-x 8 analyst analyst 4096 Jul 25 16:27 lab.support.files
drwxr-xr-x 2 analyst analyst 4096 Mar 3 15:56 second_drive
-rw-r--r-- 1 analyst analyst 254 Aug 16 13:32 space.txt

While a few files are displayed, none of them seem to be configuration files. This is because it is
convention to hide home-directory-hosted configuration files by preceding their names with a “.” (dot)
character.
b. Use the ls command again but this time add the –a option to also include hidden files in the output:
[analyst@secOps ~]$ ls –la
total 268
drwxr-xr-x 19 analyst analyst 4096 Aug 2 15:43 .
drwxr-xr-x 3 root root 4096 Sep 26 2014 ..

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 10
Lab – Working with Text Files in the CLI

-rw------- 1 analyst analyst 250 May 4 11:42 .atftp_history

-rw------- 1 analyst analyst 13191 Aug 1 09:48 .bash_history
-rw-r--r-- 1 analyst analyst 97 Mar 21 15:31 .bashrc
drwxr-xr-x 4 analyst analyst 4096 Jul 6 10:26 broken_down
drwxr-xr-x 10 analyst analyst 4096 Nov 7 2016 .cache
drwxr-xr-x 12 analyst analyst 4096 Jun 5 11:45 .config
-rw-r--r-- 1 analyst analyst 16384 Apr 12 10:06 .cyberops_topo.py.swp
drwxr-xr-x 2 analyst analyst 4096 Sep 26 2014 Desktop
-rw-r--r-- 1 analyst analyst 43 Sep 27 2014 .dmrc
drwx------ 3 analyst analyst 4096 Jul 14 11:28 Downloads
-rw-r--r-- 1 analyst analyst 72 Sep 26 2014 .fehbg
drwxr-xr-x 5 analyst analyst 4096 Sep 26 2014 .fluxbox
drwx------ 3 analyst analyst 4096 Sep 7 2016 .gnupg
-rw------- 1 analyst analyst 28920 Aug 2 15:01 .ICEauthority
drwxr-xr-x 2 analyst analyst 4096 Sep 26 2014 .idlerc
drwxr-xr-x 3 analyst analyst 4096 Sep 27 2014 .java
drwxr-xr-x 8 analyst analyst 4096 Jul 25 16:27 lab.support.files
-rw------- 1 analyst analyst 290 Jul 6 15:15 .lesshst
drwxr-xr-x 3 analyst analyst 4096 Sep 26 2014 .local
<Some output omitted>

c. Use cat command to display the contents of the .bashrc file. This file is used to configure user-
specific terminal behavior and customization.
[analyst@secOps ~]$ cat .bashrc
export EDITOR=vim

PS1='\[\e[1;32m\][\u@\h \W]\$\[\e[0m\] '

alias ls="ls --color"
alias vi="vim"

Do not worry too much about the syntax of .bashrc at this point. The important thing to notice is that
.bashrc contains configuration for the terminal. For example, the line PS1='\[\e[1;32m\][\u@\h \W]\$\
[\e[0m\] ' defines the prompt structure of the prompt displayed by the terminal:
[username@hostname current_dir] followed by a dollar sign, all in green. A few other
configurations include shortcuts to commands such as ls and vi. In this case, every time the user
types ls, the shell automatically converts that to ls –color to display a color-coded output for ls
(directories in blue, regular files in grey, executable files in green, etc.)
The specific syntax is out of the scope of this course. What is important is understanding that user
configurations are conventionally stored as hidden files in the user’s home directory.
d. While configuration files related to user applications are conventionally placed under the user’s home
directory, configuration files relating to system-wide services are place in the /etc directory, by
convention. Web services, print services, ftp services, email services are examples of services that
affect the entire system and of which configuration files are stored under /etc. Notice that regular
users do not have writing access to /etc. This is important as it restricts the ability to change the
system-wide service configuration to the root user only.
Use the ls command to list the contents of the /etc directory:
[analyst@secOps ~]$ ls /etc
adjtime host.conf mke2fs.conf rc_maps.cfg
apache-ant hostname mkinitcpio.conf request-key.conf
apparmor.d hosts mkinitcpio.d request-key.d
arch-release ifplugd modprobe.d resolv.conf
avahi initcpio modules-load.d resolvconf.conf
bash.bash_logout inputrc motd rpc
bash.bashrc iproute2 mtab rsyslog.conf

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 4 of 10
Lab – Working with Text Files in the CLI

binfmt.d iptables nanorc securetty

ca-certificates issue netconfig security
crypttab java-7-openjdk netctl services
dbus-1 java-8-openjdk netsniff-ng shadow
default kernel nginx shadow-
depmod.d krb5.conf nscd.conf shells
dhcpcd.conf ld.so.cache nsswitch.conf skel
dhcpcd.duid ld.so.conf ntp.conf ssh
dkms ld.so.conf.d openldap ssl
drirc libnl openvswitch sudoers
elasticsearch libpaper.d os-release sudoers.d
environment lightdm pacman.conf sudoers.pacnew
ethertypes locale.conf pacman.conf.pacnew sysctl.d
filebeat locale.gen pacman.d systemd
fonts locale.gen.pacnew pam.d tmpfiles.d
fstab localtime pango trusted-key.key
gai.conf login.defs papersize udev
gemrc logrotate.conf passwd UPower
group logrotate.d passwd- vdpau_wrapper.cfg
group- logstash pcmcia vimrc
group.pacnew lvm pkcs11 webapps
grub.d machine-id polkit-1 wgetrc
gshadow mail.rc profile X11
gshadow- makepkg.conf profile.d xdg
gshadow.pacnew man_db.conf protocols xinetd.d
gtk-2.0 mdadm.conf pulse yaourtrc
gtk-3.0 mime.types rc_keymaps

e. Use the cat command to display the contents of the bash_bashrc file:
[analyst@secOps ~]$ cat /etc/bash.bashrc
#
# /etc/bash.bashrc
#

# If not running interactively, don't do anything

[[ $- != *i* ]] && return

PS1='[\u@\h \W]\$ '

case ${TERM} in
xterm*|rxvt*|Eterm|aterm|kterm|gnome*)
PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:
%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/\~}"'

;;
screen)
PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:
%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/\~}"'
;;
esac

[ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-

completion/bash_completion
[analyst@secOps ~]$

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 5 of 10
Lab – Working with Text Files in the CLI

The syntax of bash_bashrc is out of scope of this course. This file defines the default behavior of the
shell for all users. If a user wants to customize his/her own shell behavior, the default behavior can be
overridden by editing the .bashrc file located in the user’s home directory. Because this is a system-
wide configuration, the configuration file is placed under /etc, making it editable only by the root user.
Therefore, the user will have to log in as root to modify .bashrc.
Why are user application configuration files saved in the user’s home directory and not under /etc with
all the other system-wide configuration files?
_________________________________________________________________________________
___
_________________________________________________________________________________
___
_________________________________________________________________________________
___
_________________________________________________________________________________
___

Step 2: Editing and Saving Configuration files

As mentioned before, configuration files can be edited with text editors.
Let’s edit .bashrc to change the color of the shell prompt from green to red for the analyst user.
a. First, open SciTE by selecting Applications > CyberOPS > SciTE from the tool bar located in the
upper portion of the Cisco CyberOPS VM screen.
b. Select File > Open to launch SciTE’s Open File window.
c. Because .bashrc is a hidden file with no extension, SciTE does not display it in the file list. If the
Location feature is not visible in the dialog box, Change the type of file shown by selecting All Files
(*) from the type drop box, as shown below. All the files in the analyst’s home directory are shown.
d. Select .bashrc and click Open.

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 6 of 10
Lab – Working with Text Files in the CLI

e. Locate 32 and replace it with 31. 32 is the color code for green, while 31 represents red.

f. Save the file by selecting File > Save and close SciTE by clicking the X icon.
g. Click the Terminal application icon located on the Dock, at the bottom center of the Cisco CyberOPS
VM screen. The prompt should appear in red instead of green.
Did the terminal window which was already open also change color from green to red? Explain.
_________________________________________________________________________________
___
_________________________________________________________________________________
___
h. The same change could have been made from the command line with a text editor such as nano.
From a new terminal window, type nano .bashrc to launch nano and automatically load the .bashrc
file in it:
[analyst@secOps ~]$ nano .bashrc

GNU nano 2.8.1 File: .bashrc

export EDITOR=vim

PS1='\[\e[1;31m\][\u@\h \W]\$\[\e[0m\] '

alias ls="ls --color"
alias vi="vim"

[ Read 5 lines ]
^G Get Help ^O Write Out ^W Where Is ^K Cut Text ^J Justify ^C Cur Pos
^X Exit ^R Read File ^\ Replace ^U Uncut Text^T To Spell ^_ Go To Line

i. Change 31 to 33. 33 is the color code to yellow.

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 7 of 10
Lab – Working with Text Files in the CLI

j. Press CTRL+X to save and then press Y to confirm. Nano will also offer you the chance to change
the filename. Simply press ENTER to use the same name, .bashrc.
k. Nano will end, and you will be back on the shell prompt. Again, click the Terminal application icon
located on the Dock, at the bottom center of the Cisco CyberOps VM screen. The prompt should
now appear in yellow instead of red.

Step 3: Editing Configuration Files for Services

System-wide configuration files are not very different from the user-application files. nginx is a lightweight
web server that is installed in the Cisco CyberOPS VM. nginx can be customized by changing its
configuration file, which is located in under /etc/nginx.
a. First, open nginx’s configuration file in a nano. The configuration file name used here is
custom_server.conf. Notice below that the command is preceded by the sudo command. After
typing nano include a space and the -l switch to turn on line-numbering.
[analyst@secOps ~]$ sudo nano -l /etc/nginx/custom_server.conf
[sudo] password for analyst:
Use the arrow keys to navigate through the file.

GNU nano 2.9.5 /etc/nginx/custom_server.conf

1
2 #user html;
3 worker_processes 1;
4
5 #error_log logs/error.log;
6 #error_log logs/error.log notice;
7 #error_log logs/error.log info;
8
9 #pid logs/nginx.pid;
10
11
12 events {
13 worker_connections 1024;
14 }
15
16
17 http {
18 include mime.types;
19 default_type application/octet-stream;
20
21 #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
22 # '$status $body_bytes_sent "$http_referer" '
23 # '"$http_user_agent" "$http_x_forwarded_for"';
24
25 #access_log logs/access.log main;
26
27 sendfile on;
28 #tcp_nopush on;
29
30 #keepalive_timeout 0;
31 keepalive_timeout 65;
32
33 #gzip on;

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 8 of 10
Lab – Working with Text Files in the CLI

34
35 types_hash_max_size 4096;
36 server_names_hash_bucket_size 128;
37
38 server {
39 listen 81;
40 server_name localhost;
41
42 #charset koi8-r;
43
44 #access_log logs/host.access.log main;
45
46 location / {
47 root /usr/share/nginx/html;
48 index index.html index.htm;
49 }

^G Get Help ^O Write Out ^W Where Is ^K Cut Text ^J Justify ^C Cur Pos
^X Exit ^R Read File ^\ Replace ^U Uncut Text ^T To Spell ^_ Go To Line

Note: Conventionally, .conf extensions are used to identify configuration files.

b. While the configuration file has many parameters, we will configure only two: the port nginx listens on
for incoming connections, and the directory it will serve web pages from, including the index HTML
homepage file.
c. Notice that at the bottom of the window, above the nano commands, the line number is highlighted
and listed. On line 39, change the port number from 81 to 8080. This will tell nginx to listen to HTTP
requests on port TCP 8080.
d. Next, move to line 47 and change the path from /usr/share/nginx/html/ to
/usr/share/nginx/html/text_ed_lab/
Note: Be careful not to remove the semi-colon at the end of the line or nginx will throw an error on
startup.
e. Press CTRL+X to save the file. Press Y and then ENTER to confirm and use the
custom_server.conf as the filename.
f. Type the command below to execute nginx using the modified configuration file:
[analyst@secOps ~]$ sudo nginx -c custom_server.conf "pid
/var/run/nginx_v.pid;"
Note: The "pid /var/run/nginx_v.pid;" is needed to tell nginx what file to use when storing the
process ID that identifies this instance of nginx.
g. Click the web browser icon on the Dock to launch Firefox.
h. On the address bar, type 127.0.0.1:8080 to connect to a web server hosted on the local machine on
port 8080. A page related to this lab should appear.
i. After successfully opening the nginx homepage, look at the connection message in the terminal
window. What is the error message referring to?
_________________________________________________________________________________
___
j. To shut down the nginx webserver, press ENTER to get a command prompt and type the following
command in the terminal window:
[analyst@secOps ~]$ sudo pkill nginx

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 9 of 10
Lab – Working with Text Files in the CLI

k. You can test whether the nginx server is indeed shut down by first clearing the recent history in the
web browser, then close and re-open the web browser, then go to the nginx homepage at
127.0.0.1:8080. Does the web page appear? _____
Challenge: Can you edit the /etc/nginx/custom_configuration.conf file with SciTE? Describe the
process below.
Remember, because the file is stored under /etc, you will need root permissions to edit it.
____________________________________________________________________________________
___
____________________________________________________________________________________
___

Reflection
Depending on the service, more options may be available for configuration.
Configuration file location, syntax, and available parameters will vary from service to service. Always
consult the documentation for information.
Permissions are a very common cause of problems. Make sure you have the correct permissions before
trying to edit configuration files.
More often than not, services must be restarted before the changes take effect.

© Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 10 of 10