Scribd
Upload
433 views

For User in Local PPP Secrets

The document discusses several configuration options for users in a PPP Secrets/PPP Profiles database on a router including: 1. Allowing/denying multiple logins by a user and allowing/denying different connection types. 2. Setting maximum data transfer limits. 3. Allowing only specific connection types. 4. Denying specific services to individual users or groups.

Uploaded by

Firman Iskandar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
433 views

For User in Local PPP Secrets

The document discusses several configuration options for users in a PPP Secrets/PPP Profiles database on a router including: 1. Allowing/denying multiple logins by a user and allowing/denying different connection types. 2. Setting maximum data transfer limits. 3. Allowing only specific connection types. 4. Denying specific services to individual users or groups.

Uploaded by

Firman Iskandar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

For user in local PPP Secrets/PPP Profiles database, it is possible to

A . Allow/deny use of more than one login by this user


B . Allow login by PPPoE and PPTP, but deny login by L2TP
C . Set max values for transferred data (Rx/Tx)
D . Allow only PPPoE login
E . Deny services (like telnet) only for this user or for one group of users

Which of the following are layers in the TCP/IP model?


Application
Session
Transport
Internet
Data Link
Physical
A . 1 and 2
B . 1, 3 and 4
C . 2, 3 and 5
D . 3, 4 and 5

What does this simple queue do (check the image)?

A . Queue guarantees upload data rate of one megabit per second for host
192.168.1.10
B . Queue limits host 192.168.1.10 download data rate to one megabit per second.
C . Queue limits host 192.168.1.10 upload data rate to one megabit per second.
D . Queue guarantees download data rate of one megabit per second for host
192.168.1.10

Is it possible to limit how many clients are able to connect to an access point?
A . No it’s not possible at all
B . Yes, but only with access-lists
C . Yes

How long is level 1 (demo) license valid?


A . 24 hours
B . Infinite time
C . 1 month
D . 1 year

Which of the following is used in standard 802.11 wireless networks?


A . CSMA/CA
B . CDMA
C . FDD
D . CSMA/CD

Which command is used to determine if an IP access list is enabled on a particular


interface?
A . show access-lists
B . show interface
C . show ip interface
D . show interface access-lists

It is required to make a web server on a private LAN visible on the Public Internet.
Only the web server port should be visible to the public.

Which of the following configuration steps must be met? (select all that apply)
A . Public IP address of the webserver must be installed on the NAT Router
B . in ip firewall NAT there should be a dst-nat between the public ip of the router
and the private ip of the webserver
C . Connection Tracking must be enabled on NAT router
D . A route between the NAT Router and the webserver must exist
E . LAN address of the webserver should be routable on the internet

Which computers would be able to communicate directly (without any routers


involved):
A . 192.168.17.15/29 and 192.168.17.20/28
B . 10.5.5.1/24 and 10.5.5.100/25
C . 10.10.0.17/22 and 10.10.1.30/23
D . 192.168.0.5/26 and 192.168.0.100

A network ready device is directly connected to a MikroTik Router BOARD 750 with
a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address
of 192.168.100.70 using a subnet mask of 255.255.255.252.

What will be a valid IPv4 address for the Router BOARD 750 for a successful
connection to the device?
A . 192.168.100.69/255.255.255.252
B . 192.168.100.70/255.255.255.252
C . 192.168.100.71/255.255.255.252
D . 192.168.100.68/255.255.255.252

Which layer 4 protocol is used for a Telnet connection?


A . IP
B . TCP
C . TCP/IP
D . UDP

There are two wireless cards (wlan1 and wlan2) which are bridged together. On
wlan1 card there is a setting "Forwarding=no". Choose the correct answer(s):
A . Stations on wlan2 will be able to communicate with stations on wlan2
B . Stations on wlan2 will be able to communicate with stations on wlan1
C . Stations on wlan1 will be able to communicate with stations on wlan1
D . To prevent communication between wlan1 and wlan2 one cannot use Bridge
Filters
E . Stations on wlan1 will be able to communicate with stations on wlan2

Which type of encryption could be used to establish a connection with a simple


passkey without using a 802.1X authentication server?
A . WPA PSK/WPA2 PSK
B . WPA EAP/WPA2 EAP

Which one of the following is true regarding VLANs?


A . Two VLANs are configured by default on all Cisco switches.
B . VLANs only work if you have a complete Cisco switched internetwork. No off-
brand switches are allowed.
C . You should not have more than 10 switches in the same VTP domain.
D . VTP is used to send VLAN information to switches in a configured VTP domain.

Where is a hub specified in the OSI model?


A . Session layer
B . Physical layer
C . Data Link layer
D . Application layer

A client that has successfully connected to a wireless network is considered to be


which of the following? Choose all that apply:
A . Authenticated
B . Associated
C . Unauthenticated
D . Unassociated
Which class of IP address has the most host addresses available by default?
A.A
B.B
C.C
D . A and B

Where can you monitor (see addresses and ports) real-time connections which are

processed by the router?


A . Firewall Connection Tracking
B . Firewall Counters
C . Tool Torch
D . Queue Tree

Which of these are possible solutions to bridge two networks over a wireless link:
A . Both devices in AP mode and enable WDS mode
B . One device in AP mode, another one in station-pseudobridge-clone
C . One device in AP mode, another one in station-pseudobridge
D . One device in AP mode, another one in station

What does the command routerA(config)#line cons 0 allow you to perform next?
A . Set the Telnet password.
B . Shut down the router.
C . Set your console password.
D . Disable console connections.

It is possible to create an encrypted PPPoE tunnel in RouterOS:


A . true
B . false

Which is the default port of IP-Winbox?


A . UDP 8291
B . TCP 80
C . TCP 8291
D . TCP 8192

You have a DHCP server on your MikroTik router. The IP addresses 10.1.2.2-
10.2.2.20 are distributed in the DHCP network. Additionally, 3 static IP address are
defined for your servers: 10.1.2.31-10.1.2.33.

After a while 20 more IP addresses need to be distributed in the network. It is


possible to distribute the extra IP address without adding another DHCP Server:
A . True
B . False
It is possible to create a configuration where VLAN and PPTP interfaces are bridged
together.
A . TRUE
B . FALSE

What PPP protocol provides dynamic addressing, authentication, and multilink?


A . NCP
B . HDLC
C . LCP
E . 25

Please select valid scan-list values in interface wireless configuration:


A . 5560,5620-5700
B . 5640~5680
C . default,5560,5600,5660-5700
D . 5540,5560,5620+5700

What is the minimal possible wireless configuration to create an Access Point?


A . radio name
B . scan-list
C . frequency
D . band
E . ssid
F . DFS mode
G . WDS
H . mode

Which protocol does DHCP use at the Transport layer?


A . IP
B . TCP
C . UDP
D . ARP

Which is a default baud-rate of currently manufactured RouterBOARDs?


A . 9600
B . 115200
C . 38400
D . 11520

What does the passive command provide to dynamic routing protocols?


A . Stops an interface from sending or receiving periodic dynamic updates.
B . Stops an interface from sending periodic dynamic updates but not from receiving
updates.
C . Stops the router from receiving any dynamic updates.
D . Stops the router from sending any dynamic updates.
You would like to allow multiple logins with one user name on a Hot-Spot server.

How should this be configured?


A . Set "Shared Users" option at /ip Hot-Spot user profile
B . It’s not possible
C . Set "Shared Users" option at /ip Hot-Spot
D . Set "only-one=no’ at /ip Hot-Spot

What is marked by connection-state=established matcher?


A . Packet belongs to an existing connection, for example a reply packet or a packet
which belongs to already replied connection
B . Packet is related to, but not part of an existing connection
C . Packet does not correspond to any known connection
D . Packet begins a new TCP connection

If you use either Telnet or FTP, which is the highest layer you are using to transmit
data?
A . Application
B . Presentation
C . Session
D . Transport

What command is used to create a backup configuration?


A . copy running backup
B . copy running-config startup-config
C . config mem
D . wr mem

Domain name system (DNS) requests can use protocol/port:


A . UDP
B . TCP port 53

PPP Secrets are used for


A . PPPoE clients
B . L2TP clients
C . IPSec clients
D . PPP clients
E . PPtP clients
F . Router users

Which port does PPTP use by default?


A . TCP 1721
B . UDP 1723
C . TCP 1723
D . UDP 1721
Router A and B are both running as PPPoE servers on different broadcast domains of
your network. It is possible to set Router A to use "/ppp secret" accounts from Router
B to authenticate PPPoE customers.
A . true
B . false

What wireless card can we use to achieve 100 Mbps actual wireless throughput?
A . 802.11 b/g
B . 802.11 a/b/g
C . 802.11 a
D . 802.11 a/n
E . 802.11 a/b/g/n

You might also like