Scribd
Upload
98 views

The Elite™ Manual

Uploaded by

July Tade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views

The Elite™ Manual

Uploaded by

July Tade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

THE ELITE™ MANUAL

www.BlueTigerUSA.com
®

Our mission is to
help professionals live safe and happy lives
while traveling on the road.
Volume levels are measured in decibels (dB). Exposing your ears to any
noise at or above 85 dB can cause gradual hearing loss.
According to the Occupational Safety and Health Administration (OSHA),
listening to volume levels over 100 dB for
more than two hours at a time can lead to hearing loss.

http://www.osha.gov/SLTC/noisehearingconservation/#loud
Table of Contents

4. Battery Care & Charging Instructions 13. Industry Leading Customer Support

5. Pairing Instructions 13. One-Year Manufacturer’s Warranty

6. Pairing with Multiple Devices 14. FCC Compliance Statement

(Multi-Point Pairing) 15. ISED Compliance Statement

7. In-Call Control 16. RF Exposure Compliance Statement

9. Controlling Your Music

11. Additional Uses

12. Available Accessories


Battery Care & Charging Instructions
Your Blue Tiger ® Elite headset uses a high-quality Li-Polymer battery that allows
up to 34 hours of continuous use between charges. Standby time is rated for
up to 600 hours, but will vary based on your usage patterns.

Once your battery is low enough the red-light indicator will blink intermittently
and you will begin to hear a chirp to alert you that the battery has less than 30
min of talk time left.

When charging the headset, the LED indicator will display a red light and will
blink blue intermittently if the headset is also turned on. When fully charged,
the red indicator light will turn off. Make sure to power off your device once the
chirping starts or the chirping will continue even once the battery is fully charged.
Pairing Instructions

1.Ensure your Blue Tiger ® Elite headset is in the off position. Press & hold
the silver MFB button, located on the microphone base for 10-15 seconds.
The LED light will begin alternating between red & blue flashes. This will
indicate that your headset is in “pairing mode”.

2.On your phone, go to your Bluetooth menu, and select “Add New”
or “Search New Devices”. With your Blue Tiger ® headset in pairing
mode, your phone should locate your headset. Pairing procedures
may vary by phone model.

3.On your phone, select your headset on the list. Your phone may ask for a
passkey or PIN code. If so, input “0000”.
Pairing with Multiple Devices (Multi-Point Pairing)

To connect your Elite headset to two Bluetooth capable devices


simultaneously, follow the instruction below.

1. Follow pairing instructions with first device.


2. Power off headset.
3. Make sure to put headset into pairing mode again following the
pairing instructions.
4. Once the headset is paired with the second device, go into the Bluetooth
settings of the first device and select the headset name.

If you require further assistance on pairing with two devices,


give us a call at 800-935-1165.
In-Call Control

The Blue Tiger ®Elite is fully loaded with caller functionality. Without ever
touching your phone, the Elite allows you to make calls, answer calls, redial,
take incoming calls while already on a call, and have text messages read back to
you.

To answer a call, press the Multi-Function Button (MFB). To hang up,


press the MFB again.

For call waiting, press in and hold the “Play/Pause” located near your charging
port button for 3 seconds. (Elite Series Headsets)
To redial the last number that you dialed, double click the MFB in quick
succession.

To adjust volume up or down, hold the thumb wheel toward the


(+)/(-) symbol till desired volume.

For voice dialing, tap the MFB and wait for your audio device to
respond. After your device responds, speak your command, “Call
John Doe”.

To mute/unmute the microphone, push the thumb wheel toward the


volume down and press the MFB simultaneously during a call.
Controlling Your Music

Your Blue Tiger ® Elite headset is equipped with A2DP functionality. This
technology makes it possible for you to control music and video
from your Bluetooth device directly from your headset.

When listening to music, press the thumb wheel in to pause/un-pause


your music.

To skip to the next song, flick the thumb wheel forward (+).
(Elite Series Headsets)
To skip back to the previous track, flick the thumb wheel backwards (-).

To adjust volume up, hold the thumb wheel forward (+) until you reach
the desired volume.

To adjust volume down, hold the thumb wheel forward (-) until you reach
the desired volume.
Additional Uses

Feel free to connect your Blue Tiger ® Elite to any Bluetooth enabled PC, Mac,
game systems or other Bluetooth enabled device to enjoy online chat or other
audio from these devices.
Available Accessories

Additional and replacement accessories are available for your


Blue Tiger ® Elite on our website. www.BlueTigerUSA.com

The Hook Headset Hanger


Microphone Covers
A/C Wall Adapter
D/C Car Charger
USB Cable
Universal Headset Case
Industry Leading Customer Support

At Blue Tiger USA, we stand behind our products. We believe that our
customer service does not end when we process your payment, but
continues for as long as you need us.

One-Year Manufacturer’s Warranty

All headsets have a one-year limited warranty that requires sending


the product back to Blue Tiger® headquarters. For your one-year warranty,
make sure you keep your receipt and register your product.

Blue Tiger ® is registered trademark by North American Blue Tiger Company,


LLC registered in the United States and other countries.
FCC Compliance Statement:
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the product.

ISED Compliance Statement:


This device contains licence-exempt transmitter(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.

RF Exposure Compliance Statement:


This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102
établies pour un environnement non contrôlé. Cet émetteur ne doit pas être situé ou
fonctionner conjointement avec une autre antenne ou un autre émetteur.

You might also like