EE-232 Signals & Systems

Lecture 8
Fourier Series & Fourier Transforms
 Lecture 8: Fourier Series and
Fourier Transform

Basis functions (3 lectures): Concept of basis

function. Fourier series representation of time
functions. Fourier transform and its properties.
Examples, transform of simple time functions.

Specific objectives for today:

• Examples of Fourier series of periodic functions
• Rational and definition of Fourier transform
• Examples of Fourier transforms

2/16
 Example 1: Fourier Series sin(w0t)
The fundamental period of sin(w0t) is w0
By inspection we can write:
sin( w0t )  21j e jw0t  21j e  jw0t
So a1 = 1/2j, a-1 = -1/2j and ak = 0 otherwise

The magnitude and angle of the Fourier coefficients are:

3/16
 Example 1a: Fourier Series sin(w0t)
The Fourier coefficients can also be explicitly evaluated
2 / w0
2 / w0
 sin(w0t )dt   cos(w0t ) 0
w0
a0  2  1 1  0
0
2 / w 0 2 / w 0

  
w0  jkw0t w0
ak  2 sin( w 0 t ) e dt  2
1
2j e jw0t  21j e  jw0t e  jkw0t dt
0 0
2 / w 0

 
w0
 2
1
2j e jw0t  21j e  jw0t e  jkw0t dt
0
2 / w 0


w0  j ( k 1)w0t  j ( k 1)w0t
 4j e  e dt
0

When k = +1 or –1, the integrals evaluate to T and –T,

respectively. Otherwise the coefficients are zero.
Therefore a1 = 1/2j, a-1 = -1/2j
4/16
 Example 2: Additive Sinusoids
Consider the additive sinusoidal series which has a fundamental
frequency w0:
x(t )  1  sin w0t  2 cosw0t  cos2w0t  4 
Again, the signal can be directly written as:
jw 0 t  jw 0 t jw 0 t  jw 0 t j ( 2w0t  4 )  j ( 2w0t  4 )
x(t )  1  1
2j (e e )  (e e )  (e 1
2 e )
jw 0 t  jw 0 t j 4 j 2w 0 t  j 4
 1  (1  1
2j )e  (1  ) e 1
2j  e e
1
2  e 1
2 e  j 2w 0 t
j 4  j 4
a0  1 a1  (1  j ) a1  (1  j ) a2  e
1
2
1
2
1
2 a 2  e 1
2

The Fourier series coefficients can then be visualised as:

5/16
 Example 3: Periodic Step Signal
Consider the periodic square wave, illustrated by:

and is defined over one period as:

1 | t | T1
x(t )  
0 T1 | t | T / 2
Fourier coefficients:
T1 T1

e
2T1  jkw0t  jkw0t T1
a0   1dt 
1 ak  1
T dt   1
jkw0T e
T T1
T1
T T1

2  e jkw0T1  e  jkw0T1 
  
kw0T  2j  NB, these
 2 sin( kw0T1 ) / kw0T coefficients
are real
 sin( kw0T1 ) / k
6/16
 Example 3a: Periodic Step Signal
Instead of plotting both the magnitude and the angle of
the complex coefficients, we only need to plot the value
of the coefficients.
Note we have an infinite series of non-zero coefficients

T=4T1

T=8T1

T=16T1

7/16
 Convergence of Fourier Series
Not every periodic signal can be represented as an infinite
Fourier series, however just about all interesting signals
can be (note that the step signal is discontinuous)
The Dirichlet conditions are necessary and sufficient
conditions on the signal.
Condition 1. Over any period, x(t) must be absolutely
integrable
 x(t ) dt  
T

8/16
Condition 2. In any finite interval, x(t) is of bounded variation; that
is there is no more than a finite number of maxima and minima
during any single period of the signal

9
Condition 3. In any finite interval of time, there are only a
finite number of discontinuities. Further, each of these
discontinuities are finite.

10
 Fourier Series to Fourier Transform
For periodic signals, we can represent them as linear
combinations of harmonically related complex
exponentials
To extend this to non-periodic signals, we need to consider
aperiodic signals as periodic signals with infinite period.
As the period becomes infinite, the corresponding
frequency components form a continuum and the Fourier
series sum becomes an integral (like the derivation of
CT convolution)
Instead of looking at the coefficients a harmonically –
related Fourier series, we’ll now look at the Fourier
transform which is a complex valued function in the
frequency domain

11/16
 Definition of the Fourier Transform
We will be referring to functions of time and their Fourier
transforms. A signal x(t) and its Fourier transform X(jw) are
related by the Fourier transform synthesis and analysis
equations

X ( jw )   x(t )e  jwt dt  F{x(t )}


and

x(t )  1
2 

X ( jw )e jwt dw  F 1{ X ( jw )}
We will refer to x(t) and X(jw) as a Fourier transform pair with
the notation
F
x(t )  X ( jw )
As previously mentioned, the transform function X() can roughly
be thought of as a continuum of the previous coefficients
A similar set of Dirichlet convergence conditions exist for the
Fourier transform, as for the Fourier series (T=(- ,))

12/16
 Example 1: Decaying Exponential
Consider the (non-periodic) signal
x(t )  e  at u(t ) a0
Then the Fourier transform is:
 
X ( jw )   e u (t )e
 at  jwt
dt   e ( a  jw )t dt
 0

1
 e ( a  jw )t
 ( a  jw ) 0

1

( a  jw )

a=1

13/16
 Example 2: Single Rectangular Pulse
Consider the non-periodic rectangular pulse at zero
1 | t | T1
x(t )  
0 | t | T1
The Fourier transform is:
 T1
X ( jw )   x(t )e  jwt
dt   e  jwt dt
 T1
T1
1  jwt
 e
 jw T1

2 sin( wT1 )
 Note, the values are real
w

T1 = 1

14/16
 Example 3: Impulse Signal
The Fourier transform of the impulse signal can be
calculated as follows:
x(t )   (t )

X ( jw )    (t )e  jwt dt  1


Therefore, the Fourier transform of the impulse function

has a constant contribution for all frequencies

X(jw)

15/16
 Example 4: Periodic Signals

Lets consider a Fourier transform which is a single impulse of area 2 at a

particular (harmonic) frequency w=w0.
X ( jw )  2 (w  w0 )
The corresponding signal can be obtained by:

x(t )  1
2 
2 (w  w0 ) e jwt dw  e jw0t
which is a (complex) sinusoidal signal of frequency w0. More generally,
when 
X ( jw )   2a  (w  kw )
k  
k 0

Then the corresponding (periodic) signal is


x(t )   k
a e
k  
jkw0t

The Fourier transform of a periodic signal is a train of impulses at the

harmonic frequencies with amplitude 2ak
16/16
 Lecture 8: Summary
Fourier series and Fourier transform is used to represent
periodic and non-periodic signals in the frequency
domain, respectively.
ak  T1  x(t )e  jkw0t dt
T

X ( jw )   x(t )e  jwt dt


Looking at signals in the Fourier domain allows us to

understand the frequency response of a system and also
to design systems with a particular frequency response,
such as filtering out high frequency signals.
You’ll need to complete the exercises to work out how to
calculate the Fourier transform (and its inverse) and
evaluate the frequency content of a signal

17/16