Scribd
Upload
138 views2 pages

WQ Series Sewage Submergible Pump: Installation Sketch Installation Size Sketch

The document provides information about a WQ series submersible sewage pump. It describes the pump's construction details, materials used, applications, operating limits, warranty and performance curves. The pump is made of cast iron and stainless steel, for draining sewage and wastewater up to 7 meters deep at temperatures up to 40°C. It has a 1-year warranty and is intended for domestic, commercial and industrial wastewater applications.

Uploaded by

Fred Santos Marrufo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views2 pages

WQ Series Sewage Submergible Pump: Installation Sketch Installation Size Sketch

The document provides information about a WQ series submersible sewage pump. It describes the pump's construction details, materials used, applications, operating limits, warranty and performance curves. The pump is made of cast iron and stainless steel, for draining sewage and wastewater up to 7 meters deep at temperatures up to 40°C. It has a 1-year warranty and is intended for domestic, commercial and industrial wastewater applications.

Uploaded by

Fred Santos Marrufo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

info@usr-pump.

com

WQ SERIES SEWAGE SUBMERGIBLE PUMP

PUMP INSTALLATION AND APPLICATIONS


WQ-Type Sewage/Dirt submersible pump is extensively
used in industrial, mining and architectural operations,
being made of hard alloy and reliably well-sealed and
equipped with overheat/overload protection devise, it is
also featured by its long durability and safety for use.

STRUCTURAL CHARACTERISTICS
DELIVERY BODY :
cast iron, with UNI ISO 228/1gas threaded vertical
delivery openning.
BASE: cast iron.
IMPELLER: cast iron/brass
MOTOR SHAFT: AISI 314 stainless steel.
MECHANICAL SEAL: carbon/alumina.
MOTOR: Sealed induction MOTOR with double
impregnated class F winding (ensuring extended motor
life and wide range of use).The thermal cutout relay
(motor protector) is incorporated in single phase models
(0.55kW~2.2kW),In the three phase versions (0.75kW
up) three thermal overload connected by motor control
box.
PROTECTION: IP 68.
SUPPLY CABLE: Supplied standard with 5 meters of
cable and plug. (required).
EXTERNAL FLOAT SWICTH: standard equipment.
Only single phase Up 1.1Kw.

OPERATING LIMITS:maxium operating depth 7m


fluid temperature up to +40

WARRANTY: 1 YEAR
(according to our general sales conditions).

Installation sketch Installation size sketch


WQ
Aplication: Operating Conditions:
 Domestic / Commercial / Industrial use.  Submersible depth 7m..
 Dranaige of sewage from the building basement,  Liquid temperature up to +40°C.
hotel, Industry waste water from factories  Ambient temeprature up to +40°C.
 Pumping surface and draning water fron the  Max. Working pressure: 6 bar.
garages and sprinkles systems.  Passage of suspended solid up to
 Being equipped with a double-channel impeller 35mm.

Motor: Model Implication:


 2 pole industion motor.
 Single-phase / three-phase, 60Hz.
 Insulation: Class F.
WQ(SP) 10 - 15 - 0.75
 Protection: IP 68.
 With capacitor and thermal overload protection.
Rated Power (kW)

Material: Rated Head(m)


 Pump body: Cast Iron. Rated Flow(m3h)
 Motor bracket: Cast Iron.
 Motor Shaft: SS304/SS316/SS420. Model Code
 Mechanical seal: Ceramic-Graphite.

Performance Curve:

40 80 120 160 200 g.p.m

40 3400RPM

(m)

30 WQ
30-3
0-5.
5
WQ
WQ 25-2
1.8 LPS @ 20 MTS 15-3 8-4
-------------I 0-3
20
I
WQ1
I 5-15- WQ2 WQ2
1.5 5-15- 5-22-
2.2 3
I
10 I
I
I
I
0 I
0 Lpm 100 200 300 400 500 600 700 800

Q(m3h)
0 4 8 12 16 20 24 28 32 36 40 44 48 52

102

You might also like