0% found this document useful (0 votes)
57 views4 pages

Wf18Gtlaadnn0# 第 1 頁,共 4 頁

This document provides specifications for an LCD module with model number WF18GTLAADNN0#. Key details include: - Display size of 1.77 inches with 128 x RGB x 160 dot matrix - Active viewing area of 28.03 x 35.04 mm - Interface is SPI - Operating temperature range of -20 to +70 degrees Celsius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
57 views4 pages

Wf18Gtlaadnn0# 第 1 頁,共 4 頁

This document provides specifications for an LCD module with model number WF18GTLAADNN0#. Key details include: - Display size of 1.77 inches with 128 x RGB x 160 dot matrix - Active viewing area of 28.03 x 35.04 mm - Interface is SPI - Operating temperature range of -20 to +70 degrees Celsius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

WF18GTLAADNN0# 第 1 頁,共 4 頁

Winstar Display Co., LTD


華凌光電股份有限公司
WEB: https://www.winstar.com.tw E-mail: [email protected]

SPECIFICATION

MODULE NO.: WF18GTLAADNN0#

General Specifications
Item Dimension Unit

Size 1.77 inch

Dot Matrix 128 x RGB x 160(TFT) dots

Module dimension 34.0(W) x 45.83(H) x 2.65(D) mm

Active area 28.03 x 35.04 mm

Dot pitch 0.073 x 0.219 mm

LCD type TFT, Normally White, Transmissive

View Direction 6 o’clock

Gray Scale Inversion Direction 12 o’clock

Aspect Ratio Portrait

IC ST7735S or Equivalent

Interface SPI

Backlight Type LED, Normally White

Touch Panel Without Touch Panel

Surface Anti-Glare
*Color tone slight changed by temperature and driving voltage.

WF18GTLAADNN0# 第 2 頁,共 4 頁
Absolute Maximum Ratings
Item Symbol Min Typ Max Unit

Operating Temperature TOP -20 - +70 ℃

Storage Temperature TST -30 - +80 ℃

Electrical Characteristics
Operating conditions:
Item Symbol Condition Min Typ Max Unit

Supply Voltage For Analog VCC - 2.5 2.75 3.7 V

Supply LCM current ICC - - 0.9 2 mA

Interface
LCM PIN Definition
Pin Symbol I/O Function

1 LED+ P Back light anode

2 LED- P Back light cathode


- SPI4W=’0’, 3-line SPI Enable.
SPI4W
3 I - SPI4W=’1’, 4-line SPI Enable.
(VCC=4 WIRE)
-If Not Used, Please fix this Pin at DGND Level.
4 VCC P Power Supply.

5 GND P Ground

6 CS I Chip enable (CSX)

7 RST I Reset signal (RESX)

8 SDA I/O Serial input/output signal in serial interface mode.

9 SCL I In Serial Interface, this is used as SCL.

10 D/C I Data/ command selection. (D/CX)

WF18GTLAADNN0# 第 3 頁,共 4 頁
Contour Drawing
34±0.2
1.08 31.83±0.2 LCD NO. SYMBOL

9.0±3.0
2.79
1.12

2.98 28.03 AA 2.65±0.1 1 LED+


2 LED-
3 SPI4W (VCC=4 WIRE)
3.75(W) 4 VCC
R GB
5 GND
6 CS
Pull tape
41.42±0.2 LCD

7 RST
35.04 AA

25.0±0.5
45.83±0.2

128×3(RGB)×160 8 SDA
D.S.T 9 SCL
(T=0.05mm) 10 D/C

AKK

14
34±0.5
3.5
Stiffener Contact side
10 1
5

1 10
0.3±0.05

.3
25.8

R0
0.3±0.04

2-
10
0.5±0.1 P0.5*9=4.5±0.03
16.12±0.5 5.5±0.05

The non-specified tolerance of dimension is ±0.3 mm .

WF18GTLAADNN0# 第 4 頁,共 4 頁

You might also like