Scribd
Upload
47 views

Automated Vs Manual Thermal Monitoring Return On Investment Apr1317

Automated thermal monitoring provides utilities with a more accurate and continuous stream of thermal data compared to manual spot-checks, allowing for trend analysis and condition-based maintenance. While upfront costs for an automated monitoring system are higher, the return on investment is realized after approximately three years due to reduced costs from less frequent on-site inspections and thermography reports. Automated monitoring also has additional advantages like real-time remote monitoring and alarm notifications.

Uploaded by

Sandro Cueto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Automated Vs Manual Thermal Monitoring Return On Investment Apr1317

Automated thermal monitoring provides utilities with a more accurate and continuous stream of thermal data compared to manual spot-checks, allowing for trend analysis and condition-based maintenance. While upfront costs for an automated monitoring system are higher, the return on investment is realized after approximately three years due to reduced costs from less frequent on-site inspections and thermography reports. Automated monitoring also has additional advantages like real-time remote monitoring and alarm notifications.

Uploaded by

Sandro Cueto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Automated vs.

Manual Thermal Monitoring Return on Investment


Automated vs. Manual Thermal Monitoring

Utilities have long used manual monitoring done by a skilled thermographer to detect hotspots in their
electrical system. While this method has provided results, there are advantages to a continuous flow of
information vs. taking snapshots of the system.

A snapshot of thermal information requires the operator to be in the right place at the right time. Lighting
and load conditions, temperature and humidity affect the readings as does the distance from the object.

- Is the snapshot taken from the same place each time?


- What is the weather and system load when the snapshot is taken?
- Is the thermographer interpreting the data the same way each time?

Continuous thermal monitoring provides a consistent flow of information that can be correlated to
weather conditions and system load to provide a more accurate view of the system that can be used for
trend analysis and input to a condition based maintenance program. The thermal camera continuously
cycles through pre-programmed stops to take temperature measurements from multiple points of
interest. Thermal data can be provided to operators in real time in the following ways:

- Thermal analytics are programmed to determine if monitored points go out of range. Operators
are immediately notified via SCADA alarm or email so action can be taken
- Inputs to a SCADA system – points can be tracked in the SCADA system as analogue points so they
can be monitored in real time
- Measurement points are stored in a database so they can be further analyzed in a trend analysis
tool for condition based maintenance
- Real-time thermal video can be viewed remotely

Return on Investment Analysis:


Manual Thermal Inspection Cost
Cost per day No. of days Annual Cost
Onsite Thermographer / day 2000 4 8000
Utility cost to escort 1000 4 4000
Thermography report 1000 4 4000
Annual Cost (4 Inspections) 16000

Thermal Asset Monitoring System Cost


Cost Qty Total
Asset Monitoring System Cost 50000 1 50,000
Installation 2000 1 2,000
Total 52,000
Variable
ROI (Years) 3.3 Calculated

1
www.SystemsWithIntelligence.com
Assumptions:

- Costs and frequency of manual inspections is estimated


- Estimated one day required to inspect the substation
- Automated thermal asset monitoring system can monitor four transformer bays

Based on the calculation the return on investment is realized in approximately three years.

Additional Automated Thermal Monitoring Advantages:

- The monitoring system pays for itself after the ROI period
- Data is more accurate and is collected in real time
- Reduced trips to inspect remote substations
- Real time thermal substation visualization
- Input to a condition based maintenance program

Summary

Advances in thermal monitoring have given utilities access to technology to automate inspections in
remote substations. The technology provides non-invasive, continuous, remote monitoring of operating
temperatures in high value assets allowing utilities to detect problems before failures occur and reduce
unplanned outages. Automated inspections are safer and increase reliability, reduce outages and
provide economic benefits to customers and stakeholders.

For more information about Utility Grade Video Automation Solutions for Substations please
contact: [email protected]

2
www.SystemsWithIntelligence.com

You might also like