Scribd
Upload
324 views4 pages

OLT and ONU Information Collection To Debugging - DASAN OLT V81XX - V1.1

This document provides commands for debugging and collecting information from DASAN OLT, ONUs, and SIU cards. It lists show commands to check ONU service information, status on the OLT and SFU, logs, and configurations. It also provides instructions for telnetting into the SIU card and collecting log and memory information.

Uploaded by

Tot Vongphachith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
324 views4 pages

OLT and ONU Information Collection To Debugging - DASAN OLT V81XX - V1.1

This document provides commands for debugging and collecting information from DASAN OLT, ONUs, and SIU cards. It lists show commands to check ONU service information, status on the OLT and SFU, logs, and configurations. It also provides instructions for telnetting into the SIU card and collecting log and memory information.

Uploaded by

Tot Vongphachith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

March 26, 2019:

OLT and ONU Information Collection to


Debugging
Hanoi and TAC Team.
OLT and ONU Information Collection to Debugging

CONTENT
1 Some commands for debugging service on DASAN OLT 2

Page 1 of 4
OLT and ONU Information Collection to Debugging

1 Some commands for debugging service on DASAN OLT V81XX


Item Show command to check service on ONU Meaning
ONU ▪ show onu info 3
Service ▪ show onu active 3
▪ show running-config onu-profile
H2M2V0_DASAN_ONT_H646W
▪ show running-config traffic-profile - Check on MAC
H2M2V0_DASAN_ONT_H646W learning address
▪ show onu iphost 3 information, igmp
▪ show onu pppoe status 3 table, ONU
▪ show olt mac 3 configuration ...
▪ show onu igmp-group-list 3
▪ show onu detail-info 3
▪ show onu firmware version 3

Note: The text that is highlighted in red is the parameter and


needs to be changed according to the ONU currently checking.
OLT ▪ terminal length 0
SFU ▪ show system
Log ▪ show flash
▪ show coredump
▪ show cpuload
▪ show cpu statistics avg-pkt
▪ show cpu statistics total
▪ show memory
▪ show memory all
▪ show running-config
▪ @show version
▪ tech-support all console
▪ show syslog local non-volatile - Check for firmware
▪ show olt status
and configuration
▪ show interface
▪ show redundancy status on OLT
▪ show vlan
▪ show flash
▪ show ip interface brief
▪ show arp
▪ show interface statistics rmon | grep CRC
▪ show syslog local non-volatile reverse
▪ show slot system sfu mate
▪ show slot system sfu
▪ show slot system all
▪ show interface statistics avg-pkt all
▪ show interface statistics avg-type all
▪ show mac
▪ show olt status

Page 2 of 4
OLT and ONU Information Collection to Debugging

Item Show command to check service on ONU Meaning


▪ show onu inf
▪ show slot nos siu all
▪ show boot-info
▪ show ip igmp snooping table
▪ show ip mcfdb aging-entry
▪ show slot system all
▪ q ps auex

OLT From SFU OLT, Telnet to SIU problem by address:


SIU 10.255.255.101 (SIU#1) or 10.255.255.102 (SIU#2): account is
log admin/admin.
Example: Telnet to SIU#2:
V8102_PA[B]# show arp
Flags : (C)completed entry (M)permanent entry (H)writed entry to chip
VRF IP Address Mac Address Flags Mask HW Type Interface Port
----------------------------------------------------------------------------
Global 10.72.210.246 d4:ca:6d:65:71:3d C ether mgmt --
Global 10.72.210.254 00:d0:cb:7d:d6:21 C ether mgmt --
Global 10.255.255.102 02:d0:cb:00:00:01 C ether mgmt1 --
----------------------------------------------------------------------------
C CH H CM CMH Total Iface
----------------------------------------------------------------------------
3 0 0 0 0 3 ALL INTERFACE
----------------------------------------------------------------------------
Total arp count: 3
V8102_PA[B]# telnet 10.255.255.102
Entering character mode
Escape character is '^]'.

IU_GPON16_2 login: admin


Password:
IU_GPON16_2>
IU_GPON16_2> ena
IU_GPON16_2# -

After log in SIU Card: let try to collect below log:

▪ terminal length 0
▪ show version
▪ show clock
▪ show system
▪ show coredump
▪ show memory all
▪ show memory
▪ show memory gpon_olt
▪ show memory imi
▪ show memory lib
▪ show memory nsm
▪ show process
▪ q ps aex
▪ show syslog local non-volatile
▪ show boot-info
▪ exit

Page 3 of 4

You might also like