Scribd
Upload
56 views

Product Brief: Positive Stop™ Connectors

Uploaded by

Thắng Trần
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views

Product Brief: Positive Stop™ Connectors

Uploaded by

Thắng Trần
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Product Brief

L4TDF-PS

Positive Stop™ Connectors


Secure, foolproof, no-special-tools required connection every time

Ease connector attachment issues and ensure excellent RF transmission line performance with
Positive Stop Connectors from Andrew.

Revolutionary Positive Stop Connectors for HELIAX corrugated coaxial cables require no special tools or
torque wrenches, eliminating both guess work and time consuming measurements.

Using standard wrenches and in less than one rotation, Positive Stop Connectors give the installer a
clear visual and mechanical verification of a correct fit, sealing out water and sealing in excellent
electrical performance.

Positive Stop Connectors are waterproof, even unmated.

The connectors' easy verification eliminates the need to control torque levels and provides consistent
attachment integrity and electrical performance.

l No special tools required


l Full tightens in less than one rotation
l Visual and mechanical verification
l Integrated sealing mechanism
l Faster, easier installation
l Excellent electrical performance

©2010 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope. All specifications are subject to change. Page 1 of 4
See www.commscope.com/andrew for the most current information. 2/9/2010
Product Specifications
L4TDF-PS
7­16 DIN Female Positive Stop™ for 1/2 in LDF4­50A cable  

CHARACTERISTICS

  

General Specifications
Interface  7­16 DIN Female 
Body Style  Straight 
Brand  HELIAX®   |   Positive Stop™ 
Mounting Angle  Straight 
  

Electrical Specifications
Connector Impedance  50 ohm 
Operating Frequency Band  0 – 8800 MHz 
Cable Impedance  50 ohm 
3rd Order IMD  ­120 dBm @ 910 MHz 
3rd Order IMD Test Method  Two +43 dBm Carriers 
RF Operating Voltage, maximum (vrms)  1415.00 V 
dc Test Voltage  4000 V 
Outer Contact Resistance, maximum  1.50 mOhm 
Inner Contact Resistance, maximum  0.80 mOhm 
Insulation Resistance, minimum  5000 MOhm 
Average Power  1.1 kW @ 900 MHz 
Peak Power, maximum  40.00 kW 
Insertion Loss, typical  0.05 dB 
Shielding Effectiveness  ­110 dB 

©2010 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope. All specifications are subject to change. Page 2 of 4
See www.commscope.com/andrew for the most current information. 2/9/2010
Product Specifications
L4TDF-PS

Outline Drawing
  

  
  
  

Mechanical Specifications
Outer Contact Attachment Method  Ring­flare 
Inner Contact Attachment Method  Captivated 
Outer Contact Plating  Trimetal 
Inner Contact Plating  Silver 
Attachment Durability  25 cycles 
Interface Durability  50 cycles 
Interface Durability Method  IEC 169­4:9.5 
Connector Retention Tensile Force  890 N   |   200 lbf 
Connector Retention Torque  5.42 N­m   |   48.00 in lb 
Insertion Force  200.17 N   |   45.00 lbf 
Insertion Force Method  IEC 169­1:15.2.4 
Pressurizable  No 
  

Dimensions
Nominal Size  1/2 in 
Diameter  29.01 mm   |   1.14 in 
Length  76.00 mm   |   2.99 in 
Weight  134.00 g   |   0.30 lb 
  

Environmental Specifications

©2010 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope. All specifications are subject to change. Page 3 of 4
See www.commscope.com/andrew for the most current information. 2/9/2010
Product Specifications
L4TDF-PS
Operating Temperature  ­55 °C to +85 °C (­67 °F to +185 °F) 
Storage Temperature  ­55 °C to +85 °C (­67 °F to +185 °F) 
Immersion Depth  1 m 
Immersion Test Mating  Unmated 
Immersion Test Method  IEC 60529:2001, IP68 
Water Jetting Test Mating  Unmated 
Water Jetting Test Method  IEC 60529:2001, IP66 
Moisture Resistance Test Method  MIL­STD­202F, Method 106F 
Mechanical Shock Test Method  MIL­STD­202, Method 213, Test Condition I 
Thermal Shock Test Method  MIL­STD­202F, Method 107G, Test Condition A­1, Low Temperature ­55 °C 
Vibration Test Method  IEC 60068­2­6 
Corrosion Test Method  MIL­STD­1344A, Method 1001.1, Test Condition A 
  

Standard Conditions
Attenuation, Ambient Temperature  20 °C   |   68 °F 
Average Power, Ambient Temperature  40 °C   |   104 °F 

Return Loss
Frequency Band VSWR Return Loss (dB)
45–1000 MHz 1.02 39.00
1000–2200 MHz 1.02 39.00
2210–3000 MHz 1.04 34.00
3010–5000 MHz 1.08 28.00

Regulatory Compliance/Certifications
Agency Classification
RoHS 2002/95/EC Compliant by Exemption
China RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV)

 
 

*  F o o t n o t e s
Immersion Depth  Immersion at specified depth for 24 hours 

Insertion Loss, typical  0.05√¯freq (GHz) (not applicable for elliptical waveguide) 

©2010 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope. All specifications are subject to change. Page 4 of 4
See www.commscope.com/andrew for the most current information. 2/9/2010

You might also like