Tutorial and User Guide Ver:1.

1 1 (13)

Software Tutorial For Fingerprint

Model

Our philosophy: We sell product, but the most valuable thing is our service to you.

Date Author Version Status Description

 Tutorial and User Guide Ver:1.1 2 (13)

1. HARDWARE :

1.1. How to turn on the machine

power supply to connect

turn on the power switch at the bottom

press the key at the bottom left corner

1 2 3 ESC
4 5 6 MENU
7 8 9 ▲
0 OK ▼

1.2. How to enroll fingerprint

Press “Menu”, there is a “Register” sub-menu, go on with that.

1.3. How to download data with usb

Press “Menu”, there is a “set comm” sub-menu, go on with that, then press “U-down”

2. HOW TO INSTALL THE MANAGEMENT SOFTWARE

2.1. Install the software

There is a soft copy of the software sent to you by the seller, if you don’t get it, Please ask it from the
seller.

Launch “setup.exe” to install the software, it’s easy and quick.

Tutorial and User Guide Ver:1.1 3 (13)
 Tutorial and User Guide Ver:1.1 4 (13)

2.2. Login

Run “Attendance Management System”, the default login account is “system” and the password is
blank(no password).

3. ENROLL THE STAFF FINGERPRINT

Assume there is a manufacture company, the name is “Dragon Control CO.LTD.”, there is a sale
department and it has three staffs: Tom,Jack and Jim.

3.1. Enroll the fingerprint on the machine

Ask Tom to enroll the fingerprint, the machine will generate a unique ID for Tom(from 1 to start by
default), The ID is very important, it will be used as relation between the time in/out record and the
software for further analysis. Tom(also including the boss) will remember that ID “1 “ stands for Tom.

Then, ask jack to enroll the fingerprint, another unique ID 2 will be allocated to Jack.

Ask Jim to register his fingerprint, the unique ID 3 will be allocated to Jim.

One by one, enroll each staff in the company and every one must remember his/her fingerprint ID.

3.2. Enroll the Staff info on the software

Step1: Create Depart firstly. In the menu bar, click “Department” or in the wizard diagram,
click “Department”
 Tutorial and User Guide Ver:1.1 5 (13)

Step2: Click to create a new department, a unique department ID will be assigned

automatically. Input the dept name and other information, then click “Save”.

You can create multiple depts. Here to stand for your organization hierarchy.

Step3: Add staff

Below fields are important:

o Name: Input “Tom” for example

o Staff No. system auto generated(don’t change)

 Tutorial and User Guide Ver:1.1 6 (13)

o User ID, It must match the one registered on device.

o Dept, Please select appropriate dept for the staff.

4. SOFTWARE: TO IMPOR THE ORIGINAL DATA

4.1. From USB Stick

Take “USB stick” downloaded, the file is a text file and file name is GLG_001.TXT or AGL_001.TXT
by default..

The record format is like:

No Mchn EnNo Name Mode IOMd DateTime

00001 1 00000001 33 0 2010/11/10 23:00:22

00002 1 00000001 33 0 2010/11/10 23:00:24

00003 1 00000002 33 0 2010/11/10 23:00:25

In the data communication window, click “U Disk/SD Card Import”

 Tutorial and User Guide Ver:1.1 7 (13)

Click “Get One File” to open the file, choose date format “yyyy-mm-dd”, then, click “Load”

4.2. From USB or TCPIP connection

See chapter 5/6 to setup usb connection or chapter “setup tcpip connection”, then, click
“download records” to download the new generated records from last time, click “Download
All Record” to download all record, click “Delete Record” to clean up the records on device.
 Tutorial and User Guide Ver:1.1 8 (13)

Check the raw record method 1

o Click menu “Raw Swipe Record” from menu “Attendance Management”

o Select the department on the left and begin Data/End Date, the original records for
each stuff will display, you can also modify the record here.
 Tutorial and User Guide Ver:1.1 9 (13)

Check the raw record method 2

o Click menu “Raw Swipe Record” from menu “Report”

o Select dept from left side, then click “Search”, the related records will display.

o Select dept from left side, then click “Search”, the related records will display.
 Tutorial and User Guide Ver:1.1 10 (13)

o Click “Preview”, will display below view diagram.

o Click “Excel”, will dump to data to an excel file

D:\
Records_orig_1.xls
The excel file is like:
 Tutorial and User Guide Ver:1.1 11 (13)

5. SETUP USB CONNECTION (OPTIONAL)

Connect the device with the USB cable to computer firstly.

Click “Device” in the wizard or “Device management” from menu as below:

Click “Add” to create a new fingerprint into system

Take care of below parameters:

 Tutorial and User Guide Ver:1.1 12 (13)

o Device ID: it’s from the fingerprint device, you should check from the machine,refer to
the hardware manual if you don’t know how to set/get it. (If you have more than one
device managed by the software, please set different device ID)

o Device Name: set a name you like

o Model, choose “ARM9”

o COM Port, Here choose “USB”.

 Note that if use USB connection, you should install the usb driver in advance
so that computer can recognize the device. When connect device to computer
and turn on the device, windows system will have popup message on finding
new hardware and ask you the driver.

 The USB driver is located “usb driver (arm9)” under the software installation
folder(It’s “C:\Program Files\TAS” by default), winxp/win2000/win7 system
uses: “WinXp”; Vista use “WinVista(64)”

 If you have problem on the driver installation, please contact the seller.

After the setting, click “Save”.

To test the USB connection.

Click “Download” in wizard or from menu

 Tutorial and User Guide Ver:1.1 13 (13)

Choose the device from left tree, then, click “read time”, “Download Record”, “Download All
Record” .etc. if the message dumped is normal, the connection is ok.

6. SETUP TCPIP CONNECTION(OPTIONAL)

The basic steps are same with usb connection establishment. Please refer to chapter 4.

Take care of below parameters:

o Model, choose “ARM9”

o Check the box besides “Network”

o IP address, keep same with the one on device.

o Port no: 5005(keep the default value)

o Device No.

o Don’t forget the network cable to connect the device with computer.

For the IP address setting on device, please refer to the hardware manual.