0% found this document useful (0 votes)
237 views2 pages

Datasheet ER17500 - EN - 20180628

This document summarizes the specifications of the ER 17500 primary lithium-thionyl chloride cell. The cell has a nominal capacity of 3.5 Ah, an open circuit voltage of 3.67V, and a nominal voltage of 3.6V at 0.1mA and 20°C. It has a maximum recommended pulse current of 250mA, operates between -60°C and 85°C, and has a self-discharge rate of less than 1% per year. The cell is compliant with various safety standards and has applications in utility metering, sensors, security, and smart homes.

Uploaded by

121234 datajkt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
237 views2 pages

Datasheet ER17500 - EN - 20180628

This document summarizes the specifications of the ER 17500 primary lithium-thionyl chloride cell. The cell has a nominal capacity of 3.5 Ah, an open circuit voltage of 3.67V, and a nominal voltage of 3.6V at 0.1mA and 20°C. It has a maximum recommended pulse current of 250mA, operates between -60°C and 85°C, and has a self-discharge rate of less than 1% per year. The cell is compliant with various safety standards and has applications in utility metering, sensors, security, and smart homes.

Uploaded by

121234 datajkt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ER 17500

Primary lithium-thionyl chloride cell

Electrochemistry Li-SOCl2
Cell size reference R23—A
Electrical characteristics
Nominal capacity
3.5 Ah
(at 3 mA +20°C 2.0V cut off)
Open circuit voltage (at +20°C) 3.67 V
Nominal voltage (at 0.1mA +20°C) 3.6 V
Nominal energy 12.6 Wh
Maximum recommended pulse current
Under 250 mA / 0,1 ms pulses drained every 2 min at +20°C from 250 mA
undischarged cells with 10 µA base current, yield voltage readings above
3.0 V after initial stabilization
Maximum recommended continuous current 65 mA

Self-discharge rate < 1% per year


after 2 years storage at +20°C

Storage (recommended) +30°C max


Operating temperature range -60°C / +85°C
Physical characteristics
Diameter (max) 17.13 mm
Height (max) 50.9 mm
Weight 22 g
Approx. Li metal content 0.98 g
Available termination
Radial tabs CN / CNR
Radial pins 2P/3P/2PF/ 3PF
Axial leads / Flying leads AX / FL

• Compliant with IEC 60086-4 safety standard


• Compliant with IEC 60079-11 intrinsic safety standard
• Compliant with RoHS, REACH
• UL component recognition
Main applications
• Utility metering
• Smart sensors / Connected devices
• Security
• Smart homes
Warning !
• Do not recharge, short, crush, heat,
disassemble or place in fire.
• Do not solder directly to the cell.
• Fire, explosion and burn hazard

Available from
A brand of the Saft Group
Saft Zhuhai
Block 8, LianFeng Road / Free Trade Zone
Zhuhai 519 030 / China
Data in this document is subject to change without notice. For most current information and
further details, please contact your Eternacell representative. Edition : January 2018.
ER 17500
Primary lithium-thionyl chloride cell

Available Termination

FL Type 2PF Type

2T Type 3PR Type

Data in this document is subject to change without notice. For most current information and
further details, please contact your Eternacell representative. Edition : January 2018.

You might also like