Scribd
Upload
87 views4 pages

TEX 10 Pneumatic Pick Hammer: Long Stroke. Hard Hitting. Low Weight

Uploaded by

alexander_1985
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views4 pages

TEX 10 Pneumatic Pick Hammer: Long Stroke. Hard Hitting. Low Weight

Uploaded by

alexander_1985
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

TEX 10 pneumatic pick hammer

Long stroke. Hard hitting. Low weight.


It’s light, compact and it
hits hard for its weight

The TEX 10 pick hammer is a light, compact all-rounder that you’ll


really appreciate having around when you need a heavy hitter.
With its long piston stroke and relatively low frequency, you can
work quickly and effectively in concrete, hard brick and other hard
materials.

High performance/weight ratio


Operators like the TEX 10 because it’s easy to handle. It weighs
just 10 kg and at 500 mm is comparatively short. Add to this the
high impact energy, and you have a tool that in relation to its size
and weight, hits surprisingly hard.

This is especially true if you compare it with an electric tool of the


same weight class: pneumatic hammers are known to deliver
significantly more hitting power – sometimes as much as 100 per
cent more.

Proven design. Wide range of choices


The design of the TEX 10 is the result of many years of tough
work experience.

The pick hammer is available in three versions and with two differ-
ent shanks. Two of the versions have traditional hexagonal shanks
and can be used in a wide range of applications. The PSR version,
with its round shank, has an unguided, free-rotating chisel which
facilitates work such as removing refractory brick.

Effective silencing Cap tool retainer Kick-latch tool ­retainer


With a guaranteed The threaded cap tool Choose the kick-latch
noise level of just retainer gives a more tool retainer for quick
103 dB, the TEX 10 comfortable grip when and easy tool changing.
already meets the working horizontally.
European Noise Available in versions
Emission Directive with hexagonal or
(NED) for 2006. round shanks.
Air cushioning
Slim profile When the machine is run-
Thanks to the slim ning off-load, the piston
design of the pick turns on air cushions at both
hammer, you can ends of the cylinder, substan-
get in really close to tially reducing vibration and
walls and work where ­virtually eliminating metal-to-
space is tight. metal contact.

Technical data TEX 10


Impact
Model Tool shank Weight Air consumption Length frequency Tool retainer Part number
mm in. kg lbs. l/s cfm mm in. blows/min
TEX 10PS Hex 22x82.5 Hex 7/8 x 3 1/4 10.2 22.5 17 36 520 20 1/2 1350 Cap 8461 0211 30
TEX 10PSR R 25x75 R1x3 10.2 22.5 17 36 520 20 1/2 1350 Cap 8461 0211 31
TEX 10PS KL Hex 22x82.5 Hex 7/8 x 3 1/4 10.7 23.6 17 36 500 19 3/4 1350 Kick-latch 8461 0211 32
All data at 6 bar (90 PSI) pressure
Hard, wear-resistant tools

Atlas Copco chisels are manufactured from a tool steel The striking face is end-milled. This results in better con-
specially designed and specified for pneumatic tool tact between the piston and the tool, improved transfer
applications. A controlled heat treatment process imparts of energy, as well as less vibration and wear on both
both strength and high wear resistance to deep surface hammer and chisel. At Atlas Copco we maintain a com-
layers whilst maintaining a tough shock-resistant central prehensive range of chisels to ensure that you always
core to resist breakage. have the right tool for the job.

Tool Description Tip width Working length Body Weight Part no.

Shank H 22x82.5 mm (H 7/8 x 3 1/4 in) mm in. mm in. section kg lbs.

Moil point 380 15 1.5 3.3 3083 3242 00

Moil point 1000 39 4.5 9.9 3083 3243 00

Narrow chisel 25 1 380 15 1.5 3.3 3083 3244 00

Narrow chisel 25 1 1000 39 4.5 9.9 3083 3245 00

Wide chisel 75 3 380 15 2.5 5.5 3083 3246 00

Asphalt cutter 125 5 380 15 3.2 7.0 3083 3069 00

Formalix 2004
Digging chisel 75 3 450 18 3.4 7.5 3083 3247 00

Digging spade 120 4 3/4 400 16 3.2 7.0 3083 3248 00

Intellecta 2006 07
Clay spade 125 5 430 17 3.3 7.3 3083 3249 00

Wedge chisel 35 1 3/8 380 15 3.5 7.7 3083 3250 00

9800 0465 01 © 2004, Atlas Copco Construction Tools AB, Stockholm, Sweden.
Shaft for pad 310 12 1.3 2.9 3083 3251 00

Tamping pad, round 175 7 7.5 16.5 3083 3252 10

Tamping pad, square 175 7 5.7 12.5 3083 3239 00

Driver pad, round 100 4 2.5 5.5 9245 2817 90

Shank R 25x75 mm (R 1 x 3 in)

Moil point 330 13 1.6 3.5 3083 3265 00


Narrow chisel 25 1 330 13 1.6 3.5 3083 3266 00

Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty
or Product Liability.

www.atlascopco.com

You might also like