-|Transparent setting guide|-

Temperature Sensors
▣ Head Type Quick Selection Guide
Step 1. Select the temperature sensor type
Select the temperature sensors as head type.
Sheath
Type Thermocouples RTD Sheath RTD
thermocouples
Code SH1 SH2 SH3 SH4

Step 2. Select the head type

Select the head type, material, and wireway specification.
Standard
Type
Small Middle Middle 2-port

Appearance

D1, D2 : Aluminum PF1/2, PF3/4

C8 : Aluminum G1 : Aluminum
Code E1, E2 : Cast iron PF1/2, PF3/4
PF3/8 PF1/2×2
F1, F2 : Stainless steel PF1/2, PF3/4

Explosion-proof
Type Exposed
Middle Bidirectional Middle 2-port

Appearance

H1 : Aluminum PF1/2
J1 : Aluminum PF1/2×2
H2 : Aluminum PF3/4
Code J2 : Aluminum PF3/4×2 K1 : Aluminum PF1/2×2 M1 : Aluminum
I1 : Stainless steel PF1/2
J3 : Aluminum PF1/2, PF3/4
I2 : Stainless steel PF3/4

Step 3. Select the tube (sheath) type

Select the tube (sheath) at the bottom of the head.

Type Standard Middle joint Flanged Special

E0 H0
K0 P0 Q0
Code A0 EC F0 B0 C0 G0 HC L0 M0 N0 SC I0 R0
KS PC QC
ED HS

Appearance

※ First digit meaning of the tube (sheath) code

A Standard F Nipple screwed L Compression fitting Q Metal support flanged 2
B Slide screwed G Screwed M Flanged S Metal support slide flanged (ceramic)
C Upper slide screwed H Metal support N Slide flanged I I pad
E Metal support K Nipple union P Metal support flanged (1) R R pad
※ Second digit meaning of the tube (sheath) code
0 Metal C Non-metal D Double ceramic S Spring load structure
※ The tube (sheath) type is decided according to the head type of temperature sensor. Refer to the corresponding page of the temperature
sensor type.

Step 4. Select the element type

Select the element type.
Sensor Sensor element Sensor Sensor element
Thermocouples K, E, J, T, N, B, R, S (Code: K, E, J, T, N, B, R, S) RTD
DPt100, JPt100
Sheath (Code : D, J)
K, E, J, T, N (Code : K, E, J, T, N) Sheath RTD
thermocouples
※ Sensor type: thermocouples and sensor element: B, R, S requires selecting the wire thickness additionally.
Wire thickness (code) : Ø0.3 (30), Ø0.4 (40), Ø0.45 (45), Ø0.5 (50)

F-10
-|Transparent setting guide|-

Quick Selection

Step 5. Select the elements and tube (sheath) thickness

Select the elements and tube (sheath) thickness.
Elements
Sensor Tube (sheath) thickness [Ø]
(Code)
6.0, 6.4, 8.0, 10, 13, 13.8, 15, 17, 17.3, 20, 21.7, 22, 25, 27, 30, 35, 40
Thermocouples
※ In case of metal or non-metal, thickness is separated.

Single Sheath
1.0, 1.6, 2.3, 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
(S) thermocouples
RTD 6.4, 8.0, 10, 12, 13.8, 15, 17.3, 22, 27
Sheath RTD 2.3, 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
Thermocouples 6.4, 8.0, 10, 13, 13.8, 15, 17, 17.3, 20, 21.7, 22, 25, 27, 30, 38, 40
Sheath
Double 1.6, 2.3, 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
thermocouples
(D)
RTD 8.0, 10, 12, 13.8, 15, 17.3, 22, 27
Sheath RTD 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
Thermocouples 6.4, 8.0, 10, 13, 13.8, 15, 17, 17.3, 20, 21.7, 22, 25, 27, 30, 38, 40
Triple Sheath
3.2, 4.8, 6.4, 8.0, 9.5, 12.7
(T) thermocouples
RTD/Sheath RTD RTD and Sheath RTD does not have triple.
※ Write the code for tube (sheath) thickness as 3-digit. (e.g.: 6 → 060, 6.4 → 064, 10 → 100, 12.7→ 127)

Step 6. Select the material of tube (sheath)

Select the material of tube (sheath).
Sensor Material (Code)
ᆞ Metal : 304SS (304), 316SS (316), 316LSS (36L), 310SS (310), INCONEL600 (INC),
Thermocouples 50Co-30Cr (50C), 446SS (446)
ᆞ Non-metal : PT1 (PT1), PT0 (PT0), GK-SIC (GK), RED-SIC (RED), KP (Al2O3 99.99%)
Sheath
316SS (316), 310SS (310), INCONEL600 (INC), 446SS (446)
thermocouples
RTD 304SS (304), 316SS (316), 316LSS (36L)
Sheath RTD 316SS (316)
※ Please contact us if surface treatment of tube (sheath) is required.
※ In case of sheath thermocouples, the material is decided according to sheath thickness. Refer to the F-37 page.

Step 7. Select the length of tube (sheath)

Write the upper and lower length tube (sheath).
Type Length[mm]
Lower tube
Write the code as 4-digit.
(sheath)
ᆞ Metal : 080mm, 100mm, 120mm, 150mm, 300mm
Upper tube
※ Union type tube (sheath) is available only 120mm, 150mm, 300mm.
(sheath)
ᆞ Non-metal : 100mm, 150mm, 200mm, 300mm
※ In case of non-upper length tube (sheath) (A0, B0, F0, L0, N0, I0, R0), write the code as " XXX ".

Step 8. Select the upper thickness of tube (sheath)

Select the upper thickness of tube (sheath).
Upper Ø21.7 (217), Ø27.2 (272), Ø15 (150)
※ The upper thickness Ø15 of tube (sheath) is available only " C0 " tube type.
※ In case of non-upper thickness of tube (sheath) (A0, B0, F0, L0, N0, I0, R0), write the code as " XXX ".

Step 9. Select the connection specification

Connection type is decided when selecting tube (sheath) type. Select the connection specification only.
Screw PT 1/8, PT 1/4, PT 3/8, PT 1/2, PT 3/4, PT 1, PT 1 1/2, PT 2,
specification NPT 1/8, NPT 1/4, NPT 3/8, NPT 1/2, NPT 3/4, NPT 1, NPT 1 1/2, NPT 2
Flange
Flange standard + Flange size + Flange type + Flange material
specification
※ For more information of screw and flange specification , refer to F-88 to F-93 page.
※ Flange material (Code) : 304SS (304), 316SS (316), 316LSS (36L), 310SS (310), INCONEL600 (INC), 50Co-30Cr (50C), 446SS (446)

Step 10. For ordering as set with thermowell

The last code should be adding "W" for ordering as a set with thermo well.

F-11
 -|Transparent setting guide|-

Temperature Sensors
▣ Lead Type Quick Selection Guide

Step 1. Select the temperature sensor type

Select the temperature sensors as lead type.
Sheath
Type Thermocouples RTD Sheath RTD
thermocouples
Code SL1 SL2 SL3 SL4

Step 2. Select the lead type

Select the lead type.

Code A0 B0 C0 C1 D0 D1 G0 H0 I0 J0 L0 M0 R0 R1 S0 S1

Appearance

※ Code Descriptions
A0 Tip Rod D0 Tip needle I0 Bayonet 3 R0 Quick connector
Tip needle + Quick connector +
B0 Straight D1 J0 Nipple R1
Compression fitting Compression fitting
C0 Standard G0 Bayonet 1 L0 I pad S0 Metal connector
Standard + Metal connector +
C1 H0 Bayonet 2 M0 R pad S1
Compression fitting Compression fitting

Step 3. Select cover material and protection type

Select the cover material and protection type.
Code Outside Inside Protection type
10 Vinyl cover wire Vinyl cover wire Protection spring
1F Vinyl cover wire Vinyl cover wire Flexible Tube
20 SUS braiding Fiberglass cover Protection spring
2F SUS braiding Fiberglass cover Flexible Tube
30 Fiberglass cover Fiberglass cover Protection spring
3F Fiberglass cover Fiberglass cover Flexible Tube
40 SUS braiding Teflon cover Protection spring
4F SUS braiding Teflon cover Flexible Tube
50 Silicon cover Teflon coating Protection spring
5F Silicon cover Teflon coating Flexible Tube

Step 4. Select the element type

Select the element type.
Sensor Sensor element Sensor Sensor element
Thermocouples K, E, J, T, N, B, R, S (Code: K, E, J, T, N, B, R, S) RTD
DPt100, JPt100
Sheath (Code : D, J)
K, E, J, T, N (Code : K, E, J, T, N) Sheath RTD
thermocouples
※ Sensor type: thermocouples, sensor element: B, R, S requires selecting the wire thickness additionally.
Wire thickness (code) : Ø0.3 (30), Ø0.4 (40), Ø0.45 (45), Ø0.5 (50)

F-12
 -|Transparent setting guide|-

Quick Selection

Step 5. Select elements and tube (sheath) thickness

Select elements and tube (sheath) thickness.
Elements
Sensor Tube (sheath) thickness [Ø]
(Code)
Thermocouples 3.2, 4.8, 6.4, 8.0, 10, 13.8
Sheath
Single 1.0, 1.6, 2.3, 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
thermocouples
(S)
RTD 6.4, 8.0, 10, 12, 13.8, 15, 17.3, 22, 27
Sheath RTD 2.3, 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
Thermocouples 6.4, 8.0, 10, 13.8
Sheath
Double 1.6, 2.3, 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
thermocouples
(D)
RTD 8.0, 10, 12, 13, 15, 17, 22, 27
Sheath RTD 3.2, 4.8, 6.4, 8.0, 9.5, 12.7
Thermocouples 8.0, 10, 13.8
Triple Sheath
3.2, 4.8, 6.4, 8.0, 9.5, 12.7
(T) thermocouples
RTD/Sheath RTD RTD and Sheath RTD does not have triple.
※ Write the code for tube (sheath) thickness as 3-digit. (e.g.: 3.2 → 032, 8.0 → 080, 12.7 → 127)

Step 6.Select the material of tube (sheath)

Select the material of tube (sheath).
Sensor Material (Code)
Thermocouples 304SS (304), 316SS (316), 316L (36L), INCONEL 600 (INC)
Sheath thermocouples 316SS (316), 310SS (310), 446SS (446), INCONEL 600 (INC)
RTD 304SS (304), 316SS (316), 316LSS (36L)
Sheath RTD 316SS (316)
※ Please contact us if surface treatment of tube (sheath) is required.
※ In case of sheath thermocouples, the material is decided according to sheath thickness. Refer to the F-60 page.

Step 7. Select the length of tube (sheath)

Write the lower tube (sheath) length and lead length.
Type Length
Lower tube (sheath) [mm] Write the 4-digit code.
Lead [m] Write the 3-digit code.

Step 8. Select the connection specification

Connection type is decided when selecting tube (sheath) type. Select the connection specification only.
Screw PT 1/8, PT 1/4, PT 3/8, PT 1/2, PT 3/4, PT 1, PT 1 1/2, PT 2
specification NPT 1/8, NPT 1/4, NPT 3/8, NPT 1/2, NPT 3/4, NPT 1, NPT 1 1/2, NPT 2
※ For more information of screw and flange specification , refer to F-88 to F-89 page.

F-13