Standard AC Motors

Introduction
Induction Reversible Synchronous
Motors
Motors
Torque
Watertight
Motors
Magnetic
Brake
Clutch &
Brake Motors Motors
Reversible Motors

Brake
Pack
Right-Angle
Gearheads Accessories

Before Using
a Standard
AC Motor

1 W ············································································A-72
6 W ············································································A-74
15 W ··········································································A-78
Additional Information 25 W ··········································································A-82
Technical Reference················································F-1 40 W ··········································································A-87
General Information ················································G-1 60 W ··········································································A-92
90 W ··········································································A-97

A-67
 Standard AC Motors

Reversible Motors
1/750 HP
1W
1/125 HP
6W

World K Series V Series

(Lead Wire Type) (Terminal Box Type)
1/50 HP

✽ Gearheads shown in the photograph are sold separately. The V Series is

15 W

Features combination type. (Pre-assembled Gearmotor)

 Optimal for Bi-Directional Operation  Conform to Safety Standards and Conforms to

1/30 HP
25 W

These are 30-minute rated motors designed for applications Global Power Supply Voltages
where instantaneous reversal of direction is frequently Conforms to UL/CSA/EN standards and the CE Marking is
required. being used in accordance with the low voltage directive. Also,
1/19 HP
40 W

our wide range of products includes those that meet the

✽ 30-minute rating: The motors may be operated continuously for 30 minutes, but
depending on operating conditions (intermittent operation, etc.), they can be power supply voltages of North America, Asia and major
operated for more than 30 minutes. countries in Europe.
1/12 HP
60 W

✽ Some of models are not certified by EN standards.

 Wide Variety of Products
World K Series, K Series and V Series motors are available. Combination Type (Pre-assembled Gearmotors)
1/8 HP
90 W

For connection with the power supply, you can select from (V Series)
lead wire and terminal box types. The combination type (pre-assembled gearmotors) come
with the motor and its dedicated gearhead already
assembled. This simplifies installation in equipment.
Motors and gearheads are also available separately so
they can be on hand to make changes or repairs.

Safety Standards and CE Marking
 World K Series, V Series
Standards Certification Body Standards File No. CE Marking

UL1004
UL2111 E64199 (6 W)
UL
CSA C22.2 No.100 E64197 (15 W
90 W)
CSA C22.2 No.77
114919 (6 W) Low Voltage Directives
EN60950 VDE
6751 (15 W
90 W)✽2
EN60034-1
EN60034-5 Conform to EN/IEC Standards
IEC60034-11✽1

✽1 15 W
90 W types.
✽2 Except V Series 90 W.
● When the motor is approved under various standards, the model name on the nameplate is the approved model name.
● Details of Safety Standards➝Page G-2
● List of Safety Standard Approved Products➝Page G-10
G-13

 K Series (1 W only)

Standards Certification Body Standards File No. CE Marking

UL1004
UL E64199
UL519

CSA C22.2 No.100 Low Voltage Directives

CSA LR47296
CSA C22.2 No.77

EN60950 VDE 5876ÜG

● Details of Safety Standards➝Page G-2

A-68
 Standard AC Motors

System Configuration

Brake Pack
SB50 (Sold separately)
Mounting Brackets (Accessories) Flexible Couplings (Accessories) (➝Page A-179)

Introduction
(➝Page A-204) (➝Page A-208)

Motor

Induction Reversible Synchronous

Motors
AC
Power Supply

Motors
Capacitor Cap (Included with Capacitor)
Insulating cap for capacitor terminal section.

Motors
Gearheads (Sold separately)

Capacitor (Included)

Motors
Torque
Watertight
Motors
Magnetic
Brake
Right-Angle Gearhead
(Sold separately)
Linear Head (Sold separately)
(➝Page A-189)

Clutch &
(➝Page D-17)

Brake
The System configuration shown is an example. Other configurations are available.

Brake
Pack
Right-Angle
Gearheads Accessories

Before Using
a Standard
AC Motor

A-69
 Standard AC Motors

Product Number Code
 World K Series  World K Series and K Series Gearhead

4 R K 25 GN - AW T U 4 GN 50 KA

Included Capacitor Type of Bearings or Shaft Type

1/750 HP

U: For Single-Phase110/115 VAC KA: Ball Bearing Type (inch size)

1W

E: For Single-Phase220/230 VAC RAA: Right Angle Solid Shaft Type (inch size)
RH: Right Angle Hollow Shaft Type
T: Terminal Box Type Gear Ratio
1/125 HP

(Example) 50: Gear Ratio of 50:1

6W

Voltage
AW: Single-Phase 100/110/115 VAC, 4 Poles 10X denotes the decimal gearhead of gear ratio 10:1
CW: Single-Phase 200/220/230 VAC, 4 Poles Gearhead Type
GN: GN Type (for use with GN type pinion shaft motor)
1/50 HP
15 W

Motor Shaft Type GU: GU Type (for use with GU type pinion shaft motor)
GN: Pinion Shaft (for use with GN type gearhead)
GU: Pinion Shaft (for use with GU type gearhead) Gearhead Frame Size 0: 1.65 in. sq. (42 mm sq.)
A: Round Shaft 2: 2.36 in. sq. (60 mm sq.)
1/30 HP
25 W

3: 2.76 in. sq. (70 mm sq.)

Output Power
4: 3.15 in. sq. (80 mm sq.)
(Example) 25: 25 W
5: 3.54 in. sq. (90 mm sq.)
Motor Series K: K Series
1/19 HP
40 W

Motor Type R: Reversible Motor

Motor Frame Size 2: 2.36 in. sq. (60 mm sq.) 4: 3.15 in. sq. (80 mm sq.)
3: 2.76 in. sq. (70 mm sq.) 5: 3.54 in. sq. (90 mm sq.)
1/12 HP
60 W

Note:
● The "U" and "E" at the end of the model name indicate that the unit includes a
capacitor. These two letters are not listed on the motor nameplate.
1/8 HP
90 W

 V Series  K Series

V H R 5 40 A T - 300 U 0 R K 1 GN - A UL

Included Capacitor UL: UL Recognized and

U: For Single-Phase110/115 VAC CSA, VDE certified
E: For Single-Phase220/230 VAC
Voltage
A: Single-Phase 115 VAC, 4 Poles
Gear Ratio
(Example) 300: Gear Ratio of 300:1 Motor Shaft Type
High GN: Pinion Shaft (for use with GN type gearhead)
Power T: Terminal Box Type A: Round Shaft
Voltage Output Power
Motor A: Single-Phase 100/110/115 VAC 1W
Series C: Single-Phase 200/220/230 VAC
Motor Series K: K Series
V: V Series Output Power Motor Type R: Reversible Motor
(Example) 40: 40 W
Motor Frame Size
Motor Frame Size 2: 2.36 in. sq. (60 mm sq.) 0: 1.65 in. sq. (42 mm sq.)
3: 2.76 in. sq. (70 mm sq.)
4: 3.15 in. sq. (80 mm sq.)
5: 3.54 in. sq. (90 mm sq.)
Motor Type
R: Reversible Motor
Note:
● The "U" and "E" at the end of the model name indicate that the unit includes a
capacitor. These two letters are not listed on the motor nameplate.

A-70
 Standard AC Motors

General Specifications
 World K Series, V Series
Item Specifications
100 MΩ or more when 500 VDC is applied between the windings and the frame after rated motor operation under normal ambient
Insulation Resistance
temperature and humidity.
Sufficient to withstand 1.5 kV at 50 Hz and 60 Hz applied between the windings and the frame for 1 minute after rated motor operation
Dielectric Strength
under normal ambient temperature and humidity.

Introduction
Temperature rise of windings are 144°F (80°C) or less measured by the resistance change method after rated motor operation with a
Temperature Rise
connected a gearhead or equivalent heat radiation plate.✽
Insulation Class Class B (266°F [130°C])
6 W type has impedance protection. All others have a built-in thermal protector (Automatic return type)

Induction Reversible Synchronous

Motors
Overheat Protection
Operating temperature, open: 266°F9°F (130°C5°C) close: 179.6°F27°F (82°C15°C)
Ambient Temperature Range 14°F
104°F (10°C
40°C) (nonfreezing)
Ambient Humidity 85% maximum (noncondensing)

Motors
Lead wire type (World K Series, V Series): IP 20
Degree of Protection
Terminal box type (World K Series, V Series): IP 40

✽Heat radiation plate (material: Aluminum)

Motors
Model (output) Size: in. (mm) Thickness: in. (mm)
2RK Type (6 W) 4.534.53 (115115)

Motors
Torque
3RK Type (15 W) 4.924.92 (125125)
4RK Type (25 W) 5.315.31 (135135)
0.20 (5)
5RK40 Type (40 W) 6.506.50 (165165)

Watertight
Motors
5RK60 Type (60 W) 7.877.87 (200200)
5RK90 Type (90 W) 7.877.87 (200200)

Magnetic
Brake
 K Series (1W only)
Item Specifications
100 MΩ or more when 500 VDC is applied between the windings and frame after the rated motor operation under normal ambient

Clutch &
Brake
Insulation Resistance
temperature and humidity.
Sufficient to withstand 1.5 kV at 60 Hz applied between the windings and the frame after rated motor operation under normal ambient
Dielectric Strength
temperature and humidity.

Brake
Pack
Temperature Rise Temperature rise of windings are 135°F (75°C) or less measured by the resistance change method after rated motor operation.
Insulation Class UL, CSA Standard Class A [221˚F (105˚C)] EN Standard Class E [248˚F (120˚C)]
Overheat Protection Impedance protected

Right-Angle
Gearheads Accessories
Ambient Temperature Range 14°F
104°F (10°C
40°C) (nonfreezing)
Ambient Humidity 85% maximum (noncondensing)
Degree of Protection IP20

Before Using
a Standard
AC Motor

A-71
 Standard AC Motors
Reversible Motors
1 W (1/750 HP)
Frame Size:
1.65 in. (
42 mm)

(Gearhead Sold Separately)

1/750 HP
1W

 Specifications — 30 Minutes Rating RSVC

1/125 HP

Model Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
6W

Upper Model Name: Pinion Shaft Type

HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Lower Model Name ( ): Round Shaft Type
1/50 HP
15 W

Z 0RK1GN-AUL 1/750 1 Single-Phase 115 60 0.10 1.13 8 1.13 8 1200 1.2

(0RK1A-AUL)
Z Impedance protected.
1/30 HP

● Values shown for rated torque and starting torque are measured for operation without the friction brake installed.
25 W

● Details of Safety Standards➝Page G-2

1/19 HP

 Gearhead (Sold Separately)

40 W

 Parallel Shaft
Gearhead Model Gear Ratio
1/12 HP
60 W

0GN
KA 3
180
● Enter the gear ratio in the box (
) within the model name.
1/8 HP
90 W

 Gearmotor — Torque Table Unit = Upper values: lb-in / Lower values: N·m
Speed r/min 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
0.168 0.2 0.28 0.34 0.43 0.51 0.64 0.77 0.97 1.15 1.41 1.68 2.3 2.8 3 3.7 4.1 5 6.2 7.5
0RK1GN-AUL / 0GN
KA
0.019 0.023 0.032 0.039 0.049 0.058 0.073 0.088 0.11 0.13 0.16 0.19 0.26 0.32 0.35 0.42 0.47 0.57 0.71 0.85
● Gearheads are sold separately. Decimal gearheads are not available for 1 W motors.
● Enter the gear ratio in the box (
) within the model name. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background
indicates rotation in the opposite direction.
● The speed is calculated by dividing the motor’s synchronous speed (60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2
33% less than the displayed value,
depending on the size of the load.

 Permissible Overhung Load and Permissible Thrust Load

Motor (Round shaft type)➝Page A-11
Gearhead➝Page A-11

 Permissible Load Inertia J for Gearhead

➝Page A-12

A-72 Features A-68 System Configuration A-69 Specifications A-72

 Standard AC Motors
 Dimensions Scale 1/4, Unit = inch (mm)
Mounting screws are included with gearheads. Dimensions for screws➝A-223

◆ Lead Wire Type

Motor Gearhead Round Shaft Type
0RK1GN-AUL 0GN
KA 0RK1A-AUL
Weight: 0.66 lb. (0.3 kg) Weight: 0.44 lb. (0.2 kg) Weight: 0.66 lb. (0.3 kg)
d A001U (0GN3KA
180KA) d A372

Introduction
0.196900.0005 (50.012 )
(37.600.025 )
0
0.18750.0005 3/16"

0
0.08 2.36 (60) 1.02 0.79
(26) (20) (4.76200.012)

Induction Reversible Synchronous

(2)

Motors
0.172 (4.362)
0.12 0.79

0.71(18)
(3) (20)

0.32 (8)
□1.65 □1.65

1.48030.0010
1.10 (28) 0.20(5) 0.50 0.06
(12.7) (□42) 0.02 (1.5) (□42) .02
89 )

0
 1. 480.5 90
 1.8 0.5)
(
0.30 (7.5)

Motors
8 
( 4

3 Motor Leads 12 inch (300 mm) Length

Motors
0.65 UL Style 3266, AWG 24 0.39 (10) 0.39 (10)
(16.5) 0.138 (3.5) 0.138 (3.5)
4 Holes 4 Holes

Motors
Torque
 Capacitor (included with the motors)
1.22 Motor Capacitor Weight
(31)

Watertight
Model Model oz. (g)

Motors
(14.5)
0.57

(24.5)
0.96

0RK1GN-AUL
CH12UL 0.60 (17)
0RK1A-AUL
0.169
(4.5)
0.18

0.79

Magnetic
(4.3) ● If you need to order a capacitor without a motor, add

Brake
(20)
"-C" to the capacitor model number shown.
A capacitor cap is included with a capacitor.
0.39

AMP#187
(10)

Clutch &
Brake
0.16 (4)

(23.5)
0.93

Brake
Pack
 Connection Diagrams

Right-Angle
Gearheads Accessories
0RK1GN-AUL
CCW CW

Red
Line CW Gray
Motor
Blue
SW

Before Using
a Standard
AC Motor
CCW

Capacitor

● The direction of motor rotation is as viewed from the shaft end of the motor.
● CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Connection diagrams are also valid for the equivalent round shaft type.
● How to connect a capacitor➝Page A-225
Note:
● Connect a CR circuit to the forward/reverse select switch (SW) to protect the contact.
Connecting CR circuit, contact capacity➝Page A-226

Dimensions A-73 Connection Diagrames A-73 A-73

 Standard AC Motors
Reversible Motors
6 W (1/125 HP)
Frame Size:
2.36 in. (
60 mm)
1/750 HP

World K Series V Series/Combination Type

1W

(Gearhead Sold Separately) (Pre-assembled Gearmotor)

 Specifications — 30 Minute Rating

R rVC
1/125 HP

 World K Series (General Purpose)

6W

Model
Upper Model Name: Pinion Shaft Type Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
1/50 HP

Lower Model Name( ): Round Shaft Type

15 W

Lead Wire Type Terminal Box Type

HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 1 Dimension 2
1/30 HP
25 W

Single-Phase 110 60 0.25

Z 2RK6GN-AWU 2RK6GN-AWTU 6.3 45 5.8 41 1450 3.5
(2RK6A-AWU) (2RK6A-AWTU) Single-Phase 115 60 0.26
Single-Phase 220 50 0.12 6.3 45 6.9 49 1200
1/125 6
1/19 HP
40 W

Single-Phase 220 60 0.11 6.3 45 5.8 41 1450

Z 2RK6GN-CWE 2RK6GN-CWTE 0.8
(2RK6A-CWE) (2RK6A-CWTE) Single-Phase 230 50 0.12 7.1 50 6.9 49 1200
Single-Phase 230 60 0.12 6.3 45 5.8 41 1450
1/12 HP
60 W

ZImpedance protected.
● Values shown for rated torque and starting torque are measured for operation without the friction brake installed.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-10
1/8 HP
90 W

● Details of Safety Standards➝Page G-2

 V Series (Quiet Operation, High Strength, Long Life) UVC

Model
Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
Combination Type

Lead Wire Type

Terminal Box Type HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 3
Single-Phase 110 0.25
Z VHR206A-
U — 60 6.3 45 5.8 41 1450 3.5
Single-Phase 115 0.26
Single-Phase 220 50 0.12 6.3 45 6.9 49 1200
1/125 6
Single-Phase 220 60 0.11 6.3 45 5.8 41 1450
Z VHR206C-
E — 0.8
Single-Phase 230 50 0.12 7.1 50 6.9 49 1200
Single-Phase 230 60 0.12 6.3 45 5.8 41 1450
ZImpedance protected.
● Values shown for rated torque and starting torque are measured for operation without the brake applied.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-12.
● Details of Safety Standards➝Page G-2
● Models above are provided as combination types with motor and gearhead pre-assembled.
● Enter gear ratio in the box (
) within the model name.
● The values in the table are for the motor only.

 Gearheads for World K Series (Sold Separately)

 Parallel Shaft
Gearhead Model Gear Ratio
2GN
KA 3
180
2GN10XK (Decimal Gearhead)
● Enter the gear ratio in the box (
) within the model name.

A-74 Features A-68 System Configuration A-69 Specifications A-74

 Standard AC Motors
 Gearmotor — Torque Table
 World K Series (General Purpose)
The maximum permissible torque with a decimal gearhead with a gear ratio of 10:1 is 26 lb-in (3 N·m).

◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180

Introduction
2RK6GN-AWU
2RK6GN-AWTU 0.88 1.06 1.5 1.77 2.2 2.6 3.7 4.4 5.3 6.6 7.9 9.7 12.3 14.1 17.7 21 23 26 26 26
2GN
KA
2RK6GN-CWE 0.10 0.12 0.17 0.20 0.25 0.30 0.42 0.50 0.60 0.75 0.90 1.1 1.4 1.6 2.0 2.4 2.7 3 3 3
2RK6GN-CWTE

Induction Reversible Synchronous

Motors
◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m
Speed r/min 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Model

Motors
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
2RK6GN-CWE 1.06 1.23 1.77 2.1 2.6 3.1 4.4 5.3 6.2 7.8 9.7 11.5 14.1 16.8 21 25 26 26 26 26
2GN
KA
2RK6GN-CWTE 0.12 0.14 0.20 0.24 0.30 0.36 0.50 0.60 0.71 0.89 1.1 1.3 1.6 1.9 2.4 2.9 3 3 3 3

Motors
 V Series (Quiet Operation, High Strength, Long Life)
◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Motors
Torque
Speed r/min 360 300 200 120 100 60 50 30 20 15 10 6 5
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300 360
VHR206A-
U 1.59 1.94 2.9 4.8 5.8 9.7 11.5 18.5 28 37 53 53 53

Watertight
VHR206C-
E 0.18 0.22 0.33 0.55 0.66 1.1 1.3 2.1 3.2 4.2 6 6 6

Motors
◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

Magnetic
Speed r/min 300 250 166 100 83 50 41 25 16 12.5 8.3 5 4.2

Brake
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300 360
1.94 2.3 3.5 5.8 6.9 11.5 13.2 22 33 45 53 53 53
VHR206C-
E
0.22 0.26 0.4 0.66 0.79 1.3 1.5 2.5 3.8 5.1 6 6 6

Clutch &
Brake
● Gearheads and decimal gearheads are sold separately. Decimal gearheads are not available for V Series.
● Enter the gear ratio in the box (
) within the model name. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background

Brake
Pack
indicates rotation in the opposite direction.
● The speed is calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2
20% less than the
displayed value, depending on the size of the load.

Right-Angle
Gearheads Accessories
 Permissible Overhung Load and Permissible Thrust Load
Motor (Round shaft motor)➝Page A-11
Gearhead➝Page A-11

Before Using
a Standard
AC Motor
 Permissible Load Inertia J for Gearhead
➝Page A-12

Dimensions A-76 Connection Diagrames A-77 List of Motor and Gearhead Combinations for V Series A-77 A-75
 Standard AC Motors
 Dimensions Scale 1/4, Unit = inch (mm)
Mounting screws are included with gearheads. Dimensions for screws➝A-223
 World K Series
◆ Lead Wire Type q 1/4 inch shaft motors are
Motor Gearhead Round Shaft Type also available. Contact
2RK6GN-AWU 2RK6A-AWU your Oriental Motor
2GN
KA Representative for more
2RK6GN-CWE 2RK6A-CWE
Weight: 1.5 lb. (0.7 kg) Weight: 0.88 lb. (0.4 kg) Weight: 1.5 lb. (0.7 kg) information.
1/750 HP

d A004AU (2GN3KA
18KA) d A324

1W

A004BU (2GN25KA
180KA)

0.312500.0006 5/16"
1/125 HP

0.293 (7.437)
0 0.94
2.95 (75) L 1.26 (32) (7.9370.015)
6W

(24)
0.28 (7) 0.12 □2.36(□60) 0.08 0.23620.0005
0
□2.36 (□60)

0.39 (10)
(3) (2)
0.50 (600.012) 0
76 )
.02
(12.7) 0.02
 2. 700.5

2.12600.0012
2.76 .5)
1/50 HP

2.36 (60)

(

0.94
15 W

(24)

)
540.030
0
(70

0
(
1/30 HP
25 W

0.177 (4.5) 4 Holes 0.177 (4.5) 4 Holes

3 Motor Leads 12 inch (300 mm) Length
22˚ 30'
UL Style 3266, AWG 20
22˚ 30'
1/19 HP
40 W

2GN3KA~18KA: L = 1.18 (30)

2GN25KA~180KA: L = 1.57 (40)
1/12 HP

◆ Terminal Box Type w

60 W

Motor Gearhead Round Shaft Type

2RK6GN-AWTU 2RK6A-AWTU
2GN
KA
2RK6GN-CWTE 2RK6A-CWTE
1/8 HP
90 W

Weight: 1.7 lb. (0.75 kg) Weight: 0.88 lb. (0.4 kg) Weight: 1.7 lb. (0.75 kg)
d A005AU (2GN3KA
18KA) d A325
A005BU (2GN25KA
180KA)

1.65 1.65 1.65 (42)

(42) (42)
0.3125 00.0006 5/16"
0.293 (7.437)

0
L 1.26 (32) 0 0.2362 0.0005
(7.9370.015 )

(34.5)
(34.5)

1.36
(600.012)
1.36

0.12
0.39 (10)

(3) 0.50
(12.7) 2.126000.0012 0.02
0.02
2.760.5) 2.76 .5)
2.36 (60)

0.94
(24)

(70
 (540.030
0
) (70
0

0.28 (7) 0.177 (4.5) 4 Holes 0.08 0.177 (4.5)

2.95 (75) □2.36 (□60) (2) 4 Holes
0.94 □2.36 (□60)
(24)
2GN3KA~18KA: L = 1.18 (30)
2GN25KA~180KA: L = 1.57 (40)
Use cable (VCTF) with a diameter of 0.27 inch (6.8 mm)
0.34 inch (8.6 mm).
Cable entry is possible at any of the four sides of the terminal box.
Details of Terminal Box➝Page A-224

 Decimal Gearhead (for World K Series)

2GN10XK Weight: 0.44 lb. (0.2 kg)
d A003
1.52 (38.5)
1.02 0.49(12.5)
(26)
0.08 □2.36 (□60)
(2)
2
2.1260 00.0012

0.0
2.76 .5)
(54 00.030)

0
(70

0.177 (4.5) 4 Holes

A-76 Features A-68 System Configuration A-69 Specifications A-74

 Standard AC Motors
 V Series
◆ Lead Wire Type e
VHR206A-
U, VHR206C-
E (Combination Type)
Weight: 2.6 lb. (1.2 kg) including gearhead
Motor Model: VHR206A-GV, VHR206C-GV
Gearhead Model: GV2G

d A201A (GV2G5
18)
A201B (GV2G30
120)
A201C (GV2G180
360)

Introduction
0.393700.0006
Key and Key Slot (Scale 1/2)
2.95 (75) L 1.26 (32) (1000.015) (The key is provided with the gearhead)
0.28 (7) 0.16 (4) □2.36(□60)

0.004
0.15750.0012

Induction Reversible Synchronous

)

Motors
0.39 (10)

0.1
0.98

0
0

0
.02
0 0

0.098
(25) 76 0.0016

)
40.03
 2. 0.5) 0.9840.008 0.15750.0012

(2.5
0.1575 0
2.36 (60)

0
0 0.040

0.94
(24)
( 7 (250.2) (40.03
0
) ( 4 0 )

Motors
0.177 (4.5) 4 Holes
3 Motor Leads 12 inch (300 mm) Length 22˚ 30'

Motors
UL Style 3266, AWG 20
GV2G5~GV2G18: L = 1.34 (34)
GV2G30~GV2G120: L = 1.5 (38)

Motors
Torque
GV2G180~GV2G360: L = 1.69 (43)

 Capacitor (included with the motors)

Watertight
1.22 Motor Capacitor Weight

Motors
(31)
Model Model oz. (g)
0.67
(17)
1.06
(27)

2RK6GN-AW(T)U
2RK6A-AW(T)U CH35FAUL

Magnetic
Brake
0.169 0.79
0.39 (4.5)
0.18

VHR206A-
U
(4.3) (20) 0.71 (20)
0.24 2RK6GN-CW(T)E
(10)

AMP#187 (6)
2RK6A-CW(T)E CH08BFAUL

Clutch &
Brake
VHR206C-
E
0.16 (4)
1.06
(27)

● If you need to order a capacitor without a motor, add

"-C" to the capacitor model number shown.

Brake
A capacitor cap is included with a capacitor.

Pack
 Connection Diagrams  Inner Connection Diagram for 4-Terminal Capacitor

Right-Angle
Gearheads Accessories
Lead Wire Type Terminal Box Type
Terminals of the capacitor are connected as shown in the
figure. For lead wire connection, use one lead wire per
2RK6GN-AWU
2RK6GN-CWE 2RK6GN-AWTU terminal.
VHR206A-
U 2RK6GN-CWTE
VHR206C-
E

Before Using
CCW CW CCW CW

a Standard
AC Motor
Black CCW
SW Z2
Line CW Red
Line U2
Motor CW Motor
White U1
SW
CCW

Capacitor Capacitor

● The direction of motor rotation is as viewed from the shaft end of the motor.
● CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Connection diagrams are also valid for the equivalent round shaft type.
● How to connect a capacitor➝Page A-225
Note:
● Connect a CR circuit to the forward/reverse select switch (SW) to protect the contact.
Connecting CR circuit, contact capacity➝Page A-226

 List of Motor and Gearhead Combinations for V Series

Model numbers for motor and gearhead combinations are shown below.
Model Motor Model Gearhead Model
VHR206A-
U VHR206A-GV
GV2G

VHR206C-
E VHR206C-GV
● Enter the gear ratio in the box (
) within the model name.

Dimensions A-76 Connection Diagrames A-77 List of Motor and Gearhead Combinations for V Series A-77 A-77
 Standard AC Motors
Reversible Motors
15 W (1/50 HP)
Frame Size:
2.76 in. (
70 mm)
1/750 HP

World K Series V Series/Combination Type

1W

(Gearhead Sold Separately) (Pre-assembled Gearmotor)

 Specifications — 30 Minute Rating

R r VC
1/125 HP

 World K Series (General Purpose)

6W

Model
Upper Model Name: Pinion Shaft Type Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
1/50 HP
15 W

Lower Model Name( ): Round Shaft Type

Lead Wire Type
HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 1
1/30 HP
25 W

Single-Phase 110 60 0.42

T 3RK15GN-AWU 14.2 100 14.9 105 1450 6
(3RK15A-AWU) Single-Phase 115 60 0.41
Single-Phase 220 50 0.19 14.2 100 17.7 125 1200
1/19 HP

1/50 15
40 W

Single-Phase 220 60 0.21 14.2 100 14.9 105 1450

T 3RK15GN-CWE 1.5
(3RK15A-CWE) Single-Phase 230 50 0.20 14.2 100 17.7 125 1200
Single-Phase 230 60 0.21 14.2 100 14.9 105 1450
1/12 HP
60 W

TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the friction brake installed.
●The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
1/8 HP
90 W

When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-10
● Details of Safety Standards➝Page G-2

 V Series (Quiet Operation, High Strength, Long Life) UVC

Model
Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
Combination Type

Lead Wire Type

HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 2
Single-Phase 110 0.42
T VHR315A-
U 60 14.2 100 14.9 105 1450 6
Single-Phase 115 0.41
Single-Phase 220 50 0.19 17.7 125 1200
1/50 15
Single-Phase 220 60 0.21 14.9 105 1450
T VHR315C-
E 14.2 100 1.5
Single-Phase 230 50 0.2 17.7 125 1200
Single-Phase 230 60 0.21 14.9 105 1450
TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the brake applied.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-12
● Details of Safety Standards➝Page G-2
● Models above are provided as combination types with motor and gearhead pre-assembled.
● Enter gear ratio in the box (
) within the model name.
● The values in the table are for the motor only.

 Gearheads for World K Series (Sold Separately)

 Parallel Shaft
Gearhead Model Gear Ratio
3GN
KA 3
180
3GN10XK (Decimal Gearhead)
● Enter the gear ratio in the box (
) within the model name.

A-78 Features A-68 System Configuration A-69 Specifications A-78

 Standard AC Motors
 Gearmotor — Torque Table
 World K Series (General Purpose)
The maximum permissible torque with a decimal gearhead with a gear ratio of 10:1 is 44 lb-in (5 N·m).

◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
3RK15GN-AWU 2.3 2.7 3.8 4.5 5.6 6.8 9.7 11.5 13.2 16.8 20 24 30 37 44 44 44 44 44 44

Introduction
3GN
KA
3RK15GN-CWE 0.26 0.31 0.43 0.51 0.64 0.77 1.1 1.3 1.5 1.9 2.3 2.8 3.5 4.2 5 5 5 5 5 5

◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

Induction Reversible Synchronous

Motors
Speed r/min 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
2.6 3.1 4.5 5.3 6.7 8 11.5 13.2 15.9 20 23 29 36 44 44 44 44 44 44 44
3RK15GN-CWE 3GN
KA
0.30 0.36 0.51 0.61 0.76 0.91 1.3 1.5 1.8 2.3 2.7 3.3 4.1 5 5 5 5 5 5 5

Motors
 V Series (Quiet Operation, High Strength, Long Life)

Motors
◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m
Speed r/min 360 300 200 120 100 60 50 30 20 15 10 6 5
Model

Motors
Torque
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300 360
VHR315A-
U 4.1 5 7.5 12.3 15 23 29 47 71 88 88 88 88
VHR315C-
E 0.47 0.57 0.85 1.4 1.7 2.7 3.3 5.4 8.1 10 10 10 10

Watertight
Motors
◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m
Speed r/min 300 250 166 100 83 50 41 25 16 12.5 8.3 5 4.2
Model

Magnetic
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300 360

Brake
4.9 6 8.8 15 17.7 28 34 57 85 88 88 88 88
VHR315C-
E
0.56 0.68 1 1.7 2 3.2 3.9 6.5 9.7 10 10 10 10

Clutch &
Brake
● Gearheads and decimal gearheads are sold separately. Decimal gearheads are not available for V Series.
● Enter the gear ratio in the box (
) within the model name. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background
indicates rotation in the opposite direction.

Brake
Pack
● The speed is calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2
20% less than the
displayed value, depending on the size of the load.

Right-Angle
Gearheads Accessories
 Permissible Overhung Load and Permissible Thrust Load
Motor (Round shaft motor)➝Page A-11
Gearhead➝Page A-11

 Permissible Load Inertia J for Gearhead

Before Using
a Standard
AC Motor
➝Page A-12

Dimensions A-80 Connection Diagrames A-81 List of Motor and Gearhead Combinations for V Series A-81 A-79
 Standard AC Motors
 Dimensions Scale 1/4, Unit = inch (mm)
Mounting screws are included with gearheads. Dimensions for screws➝A-223
 World K Series
◆ Lead Wire Type q 1/4 inch shaft motors are
Motor Gearhead Round Shaft Type also available. Contact
3RK15GN-AWU 3RK15A-AWU your Oriental Motor
3GN
KA Representative for more
3RK15GN-CWE 3RK15A-CWE
Weight: 2.4 lb. (1.1 kg) Weight: 1.2 lb. (0.55 kg) Weight: 2.4 lb. (1.1 kg) information.
1/750 HP

d A010AU (3GN3KA
18KA) d A326

1W

A010BU (3GN25KA
180KA)
1/125 HP

0.375000.0006 3/8"

0.347 (8.825)
3.15 (80) L 1.26 (32)
6W

1.26 (32) 0.2362 00.0005

0.28 (7) 0.12 (9.52500.015) □2.76 (□70) □2.76 (□70)
0.50 0.08 (600.012)

0.59 (15)
(3)
(12.7) (2)
.02
1/50 HP

30

1.18
0.02

(30)
 3.2 0.5)
15 W

2.72 (69)

3.230.5)

2.519700.0012
2  8 2
( 8

(6400.030)
(
1/30 HP
25 W

0.217 (5.5) 4 Holes

0.217 (5.5) 4 Holes
3 Motor Leads 12 inch (300 mm) Length 22˚ 30'
1/19 HP
40 W

UL Style 3271, AWG 20

22˚ 30'
3GN3KA~18KA: L = 1.26 (32)
3GN25KA~180KA: L = 1.65 (42)
1/12 HP
60 W

 Decimal Gearhead (for World K Series)

3GN10XK Weight: 0.66 lb. (0.3 kg)
1/8 HP
90 W

d A009
1.69 (43)
1.18(30) 0.51 (13) □2.76 (□70)
0.08
(2)
2
0.0
3.23 0.5)
2.519700.0012
)

(82
(640.030
0

0.217 (5.5) 4 Holes

 V Series
◆ Lead Wire Type w
VHR315A-
U, VHR315C-
E (Combination Type)
Weight: 3.7 lb. (1.7 kg) including gearhead
Motor Model: VHR315A-GV, VHR315C-GV
Gearhead Model: GV3G

d A242A (GV3G5
18)
A242B (GV3G30
120)
A242C (GV3G180
360)

3.15 (80) L 1.26 (32) 0.472400.0007 Key and Key Slot (Scale 1/2)
0.28 (7) 0.2 (5)
0
(120.018 ) □2.76 (□70) (The key is provided with the gearhead)
0.004
0.15750.0012

0.98
)
0.47 (12)

0.1
0
0

(25) 02 0
0.098

30. 0.0016
)
40.03

 3.2 0.5) 0.9840.008 0.15750.0012

(2.5

0.1575 0
2.72 (69)

1.26

0
(32)

 8 2 (250.2) 0.040
( ( 0
40.03 ) ( 4 0 )
(

0.256 (6.5) 4 Holes

3 Motor Leads 12 inch (300 mm) Length 22˚ 30'
UL Style 3271, AWG 20
GV3G5~GV3G18: L = 1.5 (38)
GV3G30~GV3G120: L = 1.69 (43)
GV3G180~GV3G360: L = 1.89 (48)

A-80 Features A-68 System Configuration A-69 Specifications A-78

 Standard AC Motors
 Capacitor (included with the motors)
1.50 Motor Capacitor Weight
(38)
Model Model oz. (g)

0.83
(21)
1.22
(31)
3RK15GN-AWU
3RK15A-AWU CH60CFAUL 1.4 (40)
0.169 0.79

0.39 (4.5)
0.18
VHR315A-
U
(4.3) (20)
0.24

(10)
3RK15GN-CWE
AMP#187 (6)
3RK15A-CWE CH15BFAUL 1.2 (35)

Introduction
VHR315C-
E
0.16 (4)
1.22
(31)

● If you need to order a capacitor without a motor, add

"-C" to the capacitor model name shown.

Induction Reversible Synchronous

A capacitor cap is included with a capacitor.

Motors
 Connection Diagrams

Motors
Lead Wire Type
3RK15GN-AWU

Motors
3RK15GN-CWE
VHR315A-
U
VHR315C-
E

Motors
Torque
CCW CW

Watertight
Motors
Black
Line CW Red
Motor
White
SW

Magnetic
CCW

Brake
Capacitor

Clutch &
Brake
● The direction of motor rotation is as viewed from the shaft end of the motor.
● CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Connection diagrams are also valid for the equivalent round shaft type.
● How to connect a capacitor➝Page A-225

Brake
Pack
Note:
● Connect a CR circuit to the forward/reverse select switch (SW) to protect the contact.
Connecting CR circuit, contact capacity➝Page A-226

Right-Angle
Gearheads Accessories
 Inner Connection Diagram for 4-Terminal Capacitor
Terminals of the capacitor are connected as shown in the
figure. For lead wire connection, use one lead wire per
terminal.

Before Using
a Standard
AC Motor
 List of Motor and Gearhead Combinations for V Series
Model numbers for motor and gearhead combinations are shown below.
Model Motor Model Gearhead Model
VHR315A-
U VHR315A-GV
GV3G

VHR315C-
E VHR315C-GV
● Enter the gear ratio in the box (
) within the model name.

Dimensions A-80 Connection Diagrames A-81 List of Motor and Gearhead Combinations for V Series A-81 A-81
 Standard AC Motors
Reversible Motors
25 W (1/30 HP)
Frame Size:
3.15 in. (
80 mm)
1/750 HP

World K Series V Series/Combination Type

1W

(Gearhead Sold Separately) (Pre-assembled Gearmotor)

 Specifications — 30 Minute Rating

R r VC
1/125 HP

 World K Series (General Purpose)

6W

Model
Upper Model Name: Pinion Shaft Type Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
1/50 HP
15 W

Lower Model Name( ): Round Shaft Type

Lead Wire Type Terminal Box Type
HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 1 Dimension 2
1/30 HP
25 W

Single-Phase 110 60
T 4RK25GN-AWU 4RK25GN-AWTU 0.54 19.8 140 24 170 1450 8
(4RK25A-AWU) (4RK25A-AWTU) Single-Phase 115 60
Single-Phase 220 50 0.26 19.8 140 29 205 1200
1/19 HP

1/30 25
40 W

Single-Phase 220 60 0.28 19.8 140 24 170 1450

T 4RK25GN-CWE 4RK25GN-CWTE 2
(4RK25A-CWE) (4RK25A-CWTE) Single-Phase 230 50 0.26 22 160 29 205 1200
Single-Phase 230 60 0.28 19.8 140 24 170 1450
1/12 HP
60 W

TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the friction brake installed.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
1/8 HP
90 W

When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-10
● Details of Safety Standards➝Page G-2

 V Series (Quiet Operation, High Strength, Long Life) UVC

Model
Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
Combination Type

Lead Wire Type Terminal Box Type

HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 3 Dimension 4
Single-Phase 110 60
T VHR425A-
U VHR425AT-
U 0.54 19.8 140 24 170 1450 8
Single-Phase 115 60
Single-Phase 220 50 0.26 19.8 140 29 205 1200
1/30 25
Single-Phase 220 60 0.28 19.8 140 24 170 1450
T VHR425C-
E VHR425CT-
E 2
Single-Phase 230 50 0.26 22 160 29 205 1200
Single-Phase 230 60 0.28 19.8 140 24 170 1450
TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the brake applied.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-12
● Details of Safety Standards➝Page G-2
● Models above are provided as combination types with motor and gearhead pre-assembled.
● Enter gear ratio in the box (
) within the model name.
● The values in the table are for the motor only.

 Gearheads for World K Series (Sold Separately)

 Parallel Shaft  Right-Angle
Gearhead Model Gear Ratio Type Gearhead Model Gear Ratio
4GN
KA 3
180 Hollow Shaft 4GN
RH 3.6
180
4GN10XK (Decimal Gearhead) Solid Shaft 4GN
RAA 3.6
180
● Enter the gear ratio in the box (
) within the model name. ● Enter the gear ratio in the box (
) within the model name.
● Right-Angle Gearheads➝Page A-189

A-82 Features A-68 System Configuration A-69 Specifications A-82

 Standard AC Motors
 Gearmotor — Torque Table
 World K Series (General Purpose)
The maximum permissible torque with a decimal gearhead with a gear ratio of 10:1 is 70 lb-in (8 N·m).
The value is 53 lb-in (6 N·m) when 25:1
36:1 gearheads are connected.

◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180

Introduction
4RK25GN-AWU
4RK25GN-AWTU 4GN
KA 3.6 4.4 6.1 7.3 8.8 10.6 15 18.5 22 27 32 39 49 59 70 70 70 70 70 70
4RK25GN-CWE 0.41 0.50 0.69 0.83 1.0 1.2 1.7 2.1 2.5 3.1 3.7 4.5 5.6 6.7 8 8 8 8 8 8

Induction Reversible Synchronous

Motors
4RK25GN-CWTE

◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

Motors
Speed r/min 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
4RK25GN-CWE 4GN
KA 4.4 5.3 7.3 8.8 10.6 13.2 18.5 22 26 32 39 47 60 70 70 70 70 70 70 70
4RK25GN-CWTE 0.50 0.60 0.83 1.0 1.2 1.5 2.1 2.5 3.0 3.7 4.5 5.4 6.8 8 8 8 8 8 8 8

Motors
 V Series (Quiet Operation, High Strength, Long Life)

Motors
Torque
◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m
Speed r/min 360 300 200 120 100 60 50 30 20 15 10 6 5
Model

Watertight
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300 360

Motors
VHR425A-
U
VHR425AT-
U 6.8 8.1 12.3 20 24 38 46 77 116 141 141 141 141

Magnetic
VHR425C-
E 0.77 0.92 1.4 2.3 2.8 4.4 5.3 8.8 13.2 16 16 16 16

Brake
VHR425CT-
E

◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

Clutch &
Brake
Speed r/min 300 250 166 100 83 50 41 25 16 12.5 8.3 5 4.2
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300 360
VHR425C-
E 8.1 9.7 15 24 29 46 55 93 140 141 141 141 141

Brake
Pack
VHR425CT-
E 0.92 1.1 1.7 2.8 3.3 5.3 6.3 10.6 15.9 16 16 16 16

Right-Angle
Gearheads Accessories
● Gearheads and decimal gearheads are sold separately. Decimal gearheads are not available for V Series.
● Enter the gear ratio in the box (
) within the model name. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background
indicates rotation in the opposite direction.
● The speed is calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2
20% less than the
displayed value, depending on the size of the load.

Before Using
a Standard
AC Motor
 Gearmotor — Torque Table when Right-Angle Gearhead is Attached
Right-Angle Gearheads are available for World K Series only.
➝Page A-196

 Permissible Overhung Load and Permissible Thrust Load

Motor (Round shaft motor)➝Page A-11
Gearhead➝Page A-11

 Permissible Load Inertia J for Gearhead

➝Page A-12

Dimensions A-84 Connection Diagrames A-86 List of Motor and Gearhead Combinations for V Series A-86 A-83
 Standard AC Motors
 Dimensions Scale 1/4, Unit = inch (mm)
Mounting screws are included with gearheads. Dimensions for screws➝A-223
 World K Series
◆ Lead Wire Type q 5/16 inch shaft motors are
also available. Contact
Motor Gearhead Round Shaft Type
your Oriental Motor
4RK25GN-AWU 4RK25A-AWU
4GN
KA Representative for more
4RK25GN-CWE 4RK25A-CWE
information.
Weight: 3.3 lb. (1.5 kg) Weight: 1.4 lb. (0.65 kg) Weight: 3.3 lb. (1.5 kg)
1/750 HP

d A014AU (4GN3KA
18KA) d A327

1W

A014BU (4GN25KA
180KA)

0.375000.0006 3/8"
1/125 HP

0.347 (8.825)
0
3.35 (85) L 1.26 (32) (9.52500.015) 1.26 (32) 0.31500.0006
6W

0.28 (7) 0.12 □3.15 (□80) 0.08 (800.015) □3.15 (□80)

(3) 0.50 (2)

0.59 (15)
(12.7) 02
00.

0.28 (7)
1/50 HP

0.0 2 0.98  3.7 .5)

3.700.5)
15 W

1.34

2.8740 00.0012
(34)
3.11 (79)

(25) 40
(94 (9

(730.030
0
)
1/30 HP
25 W

0.217 (5.5) 4 Holes 0.217 (5.5) 4 Holes

3 Motor Leads 12 inch (300 mm) Length
1/19 HP

22˚ 30'
40 W

UL Style 3271, AWG 20 22˚ 30'

4GN3KA~18KA: L = 1.26 (32)
4GN25KA~180KA: L = 1.67 (42.5)
1/12 HP
60 W

◆ Terminal Box Type w

Motor Gearhead Round Shaft Type
1/8 HP
90 W

4RK25GN-AWTU 4RK25A-AWTU
4GN
KA
4RK25GN-CWTE 4RK25A-CWTE
Weight: 3.7 lb. (1.7 kg) Weight: 1.4 lb. (0.65 kg) Weight: 3.7 lb. (1.7 kg)
d A015AU (4GN3KA
18KA) d A328
A015BU (4GN25KA
180KA)

2.44 (62)
1.10 Max. 2.95 (75) 0.22 (5.5) 2.44 (62)
(28) 1.26
0.3750 00.0006 3/8"
0.347 (8.825)

(32)

1.69 (43)
1.69 (43)

0.31500.0006
0
0.50 (12.7) (9.52500.015) 0.08
(25)
0.98

0
(2) (80.015)
0.59 (15)

.02
00
 3.7 0.5)
0.28 (7)

2
0.98 0.0
3.70 )
2.87400.0012
1.34

4
(34)
3.11 (79)

(9 (25) 4 0.5

(9
)
0

730.030
( 0

0.28 (7) 0.12 0.217 (5.5) 0.217 (5.5)

(3) 4 Holes □3.15 (□80) 4 Holes □3.15 (□80)
3.35 (85) L 1.26 (32)

4GN3KA~18KA: L = 1.26 (32)

4GN25KA~180KA: L = 1.67 (42.5)

 Use cable (VCTF) with a diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

 Decimal Gearhead (for World K Series)

4GN10XK Weight: 0.88 lb. (0.4 kg)
d A013
1.79 (45.5)
1.26 (32) 0.53 (13.5) □3.15 (□80)
0.08
(2)

0.02
3.70  )
2.8740 00.0012
(73 0.030)

0.5
(94 
0

0.217 (5.5) 4 Holes

A-84 Features A-68 System Configuration A-69 Specifications A-82

 Standard AC Motors
 V Series
◆ Lead Wire Type e
VHR425A-
U, VHR425C-
E (Combination Type)
Weight: 5.5 lb. (2.5 kg) including gearhead
Motor Model: VHR425A-GV, VHR425C-GV
Gearhead Model: GV4G

d A202A (GV4G5
18)
A202B (GV4G30
120)
A202C (GV4G180
360)

Introduction
0.590600.0007
3.35 (85) L 1.38 (35) Key and Key Slot (Scale 1/2)
0.28 (7) 0.28 (7) (1500.018) □3.15 (□80) (The key is provided with the gearhead)

0.004
0.98

0.19690.0012

Induction Reversible Synchronous

0

Motors
0.51 (13)
(25)

0.1
.02 0.0016

0.118
0

0
00
 3.7 0.5) 0.9840.008 0.19690.0012 0.1969

)
0

50.03

(3
4 0.040
(9 ( ) ( )

1.34
(250.2)

0
3.11 (79)

(34)
0
50.03 5 0

Motors
0.256 (6.5) 4 Holes

Motors
3 Motor Leads 12 inch (300 mm) Length
22˚ 30'
UL Style 3271, AWG 20

Motors
Torque
GV4G5~GV4G18: L = 1.61 (41)
GV4G30~GV4G120: L = 1.81 (46)
GV4G180~GV4G360: L = 2.01 (51)

Watertight
Motors
◆ Terminal Box Type r
VHR425AT-
U, VHR425CT-
E (Combination Type)
Weight: 5.9 lb. (2.7 kg) including gearhead

Magnetic
Motor Model: VHR425AT-GV, VHR425CT-GV

Brake
Gearhead Model: GV4G

d A211A (GV4G5
18)
A211B (GV4G30
120)

Clutch &
Brake
A211C (GV4G180
360)
1.10 Max. 2.95 (75) 0.22 (5.5) 2.44 (62)
(28)
0.590600.0007
Key and Key Slot (Scale 1/2)

Brake
1.69 (43)

Pack
(1500.018) (The key is provided with the gearhead)
0.98

0.004
(25)
0.98

0.19690.0012

(25)

0
0.51 (13)

)
0.1
.02 0 0.0016
0

0.118

Right-Angle
0
00

Gearheads Accessories
 3.7 0.5) 0.9840.008 0.19690.0012 0.1969
)

0
50.03

(3
4 0.040
1.34

 9 (250.2) ( ) ( )
3.11 (79)

(34)

0
( 50.03 5 0
(

0.28 (7) 0.28 (7) 0.256 (6.5)

4 Holes □3.15 (□80)

Before Using
3.35 (85) L 1.38 (35)

a Standard
AC Motor
GV4G5~GV4G18: L = 1.61 (41)
GV4G30~GV4G120: L = 1.81 (46)
GV4G180~GV4G360: L = 2.01 (51)

Use cable (VCTF) with the diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

Dimensions A-84 Connection Diagrames A-86 List of Motor and Gearhead Combinations for V Series A-86 A-85
 Standard AC Motors
 Capacitor (included with the motors)
1.89 Motor Capacitor Weight
(48)
Model Model oz. (g)

0.75
(19)
1.14
(29)
4RK25GN-AW(T)U
4RK25A-AW(T)U CH80CFAUL 1.4 (40)
0.169 0.79

0.39 (4.5)
0.18
VHR425A(T)-
U
(4.3) (20)
0.24 4RK25GN-CW(T)E

(10)
AMP#187 (6) 4RK25A-CW(T)E CH20BFAUL 1.2 (35)
1/750 HP

VHR425C(T)-
E
0.16 (4)
1W

1.14
(29)
● If you need to order a capacitor without a motor, add
"-C" to the capacitor model name shown.
1/125 HP

A capacitor cap is included with a capacitor.

6W

 Connection Diagrams
1/50 HP
15 W

Lead Wire Type Terminal Box Type

4RK25GN-AWU 4RK25GN-AWTU
4RK25GN-CWE 4RK25GN-CWTE
1/30 HP
25 W

VHR425A-
U VHR425AT-
U
VHR425C-
E VHR425CT-
E
1/19 HP
40 W

CCW CW CCW CW

CCW
Black SW Z2
1/12 HP
60 W

CW Red Line U2
Line Motor CW Motor
White U1
SW
CCW
Capacitor Protective Earth
1/8 HP
90 W

Capacitor (P.E.)

● The direction of motor rotation is as viewed from the shaft end of the motor.
● CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Connection diagrams are also valid for the equivalent round shaft type.
● How to connect a capacitor➝Page A-225
Note:
● Connect a CR circuit to the forward/reverse select switch (SW) to protect the contact.
Connecting CR circuit, contact capacity➝Page A-226

 Inner Connection Diagram for 4-Terminal Capacitor

Terminals of the capacitor are connected as shown in the
figure. For lead wire connection, use one lead wire per
terminal.

 List of Motor and Gearhead Combinations for V Series

Model numbers for motor and gearhead combinations are shown below.
Model Motor Model Gearhead Model
VHR425A-
U VHR425A-GV
VHR425C-
E VHR425C-GV
GV4G

VHR425AT-
U VHR425AT-GV
VHR425CT-
E VHR425CT-GV
● Enter the gear ratio in the box (
) within the model name.

A-86 Features A-68 System Configuration A-69 Specifications A-82

 Standard AC Motors
Reversible Motors
40 W (1/19 HP)
Frame Size:
3.54 in. (
90 mm)

Introduction
World K Series V Series/Combination Type
(Gearhead Sold Separately) (Pre-assembled Gearmotor)

 Specifications — 30 Minute Rating

R r VC

Induction Reversible Synchronous

Motors
 World K Series (General Purpose)
Model
Upper Model Name: Pinion Shaft Type Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor

Motors
Lower Model Name( ): Round Shaft Type
Lead Wire Type Terminal Box Type
HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 1 Dimension 2

Motors
Single-Phase 110 60
T 5RK40GN-AWU 5RK40GN-AWTU 0.81 36 260 38 270 1450 12
(5RK40A-AWU) (5RK40A-AWTU) Single-Phase 115 60
Single-Phase 220 50 0.40 38 270 44 315 1250
1/19 40

Motors
Torque
Single-Phase 220 60 0.46 36 260 36 260 1500
T 5RK40GN-CWE 5RK40GN-CWTE 3.5
(5RK40A-CWE) (5RK40A-CWTE) Single-Phase 230 50 0.40 38 270 44 315 1250
Single-Phase 230 60 0.46 36 260 36 260 1500

Watertight
Motors
TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the friction brake installed.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.

Magnetic
Brake
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-10
● Details of Safety Standards➝Page G-2

UVC

Clutch &
Brake
 V Series (Quiet Operation, High Strength, Long Life)
Model
Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
Combination Type

Brake
Pack
Lead Wire Type Terminal Box Type
HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 3 Dimension 4

Right-Angle
Gearheads Accessories
Single-Phase 110
T VHR540A-
U VHR540AT-
U 60 0.81 36 260 38 270 1450 12
Single-Phase 115
Single-Phase 220 50 0.40 38 270 44 315 1250
1/19 40
Single-Phase 220 60 0.46 36 260 36 260 1500
T VHR540C-
E VHR540CT-
E 3.5
Single-Phase 230 50 0.40 38 270 44 315 1250
Single-Phase 230 60 0.46 36 260 36 260 1500

Before Using
a Standard
AC Motor
TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the brake applied.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-12
● Details of Safety Standards➝Page G-2
● Models above are provided as combination types with motor and gearhead pre-assembled.
● Enter gear ratio in the box (
) within the model name.
● The values in the table are for the motor only.

 Gearheads for World K Series (Sold Separately)

 Parallel Shaft  Right-Angle
Gearhead Model Gear Ratio Type Gearhead Model Gear Ratio
5GN
KA 3
180 Hollow Shaft 5GN
RH 3.6
180
5GN10XK (Decimal Gearhead) Solid Shaft 5GN
RAA 3
180
● Enter the gear ratio in the box (
) within the model name. ● Enter the gear ratio in the box (
) within the model name.
● Right-Angle Gearheads➝Page A-189

Dimensions A-89 Connection Diagrames A-91 List of Motor and Gearhead Combinations for V Series A-91 A-87
 Standard AC Motors
 Gearmotor — Torque Table
 World K Series (General Purpose)
The maximum permissible torque with a decimal gearhead with a gear ratio of 10:1 is 88 lb-in (10 N·m).

◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
5RK40GN-AWU 5.8 6.9 9.7 11.5 14.1 17.7 23 29 34 43 52 62 78 88 88 88 88 88 88 88
1/750 HP

5GN
KA
5RK40GN-AWTU 0.66 0.79 1.1 1.3 1.6 2.0 2.7 3.3 3.9 4.9 5.9 7.1 8.9 10 10 10 10 10 10 10
1W

5RK40GN-CWE 5.5 6.7 9.7 11.5 14.1 16.8 23 28 33 41 50 60 76 88 88 88 88 88 88 88

5GN
KA
5RK40GN-CWTE 0.63 0.76 1.1 1.3 1.6 1.9 2.6 3.2 3.8 4.7 5.7 6.8 8.6 10 10 10 10 10 10 10
1/125 HP
6W

◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Model
1/50 HP

Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180

15 W

5RK40GN-CWE 6.8 8.1 11.5 13.2 16.8 20 28 33 40 50 61 73 88 88 88 88 88 88 88 88

5GN
KA
5RK40GN-CWTE 0.77 0.92 1.3 1.5 1.9 2.3 3.2 3.8 4.6 5.7 6.9 8.3 10 10 10 10 10 10 10 10
1/30 HP
25 W

 V Series (Quiet Operation, High Strength, Long Life)

◆ Single-Phase 115/230 VAC 60 Hz
1/19 HP

Unit = Upper values: lb-in/Lower values: N·m

40 W

Speed r/min 360 300 200 120 100 60 50 30 20 15 10 6

Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300
1/12 HP

VHR540A-
U 10.6 13.2 19.4 31 38 62 74 123 184 230 260 260

60 W

VHR540AT-
U 1.2 1.5 2.2 3.6 4.4 7 8.4 13.9 20.9 26.2 30 30
VHR540C-
E 10.6 12.3 18.5 30 37 59 70 118 177 220 260 260
VHR540CT-
E 1.2 1.4 2.1 3.5 4.2 6.7 8 13.4 20.1 25.3 30 30
1/8 HP
90 W

◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 300 250 166 100 83 50 41 25 16 12.5 8.3 5
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300
VHR540C-
E 12.3 15 23 38 45 71 86 144 210 260 260 260
VHR540CT-
E 1.4 1.7 2.6 4.3 5.1 8.1 9.8 16.3 24.4 30 30 30

● Gearheads and decimal gearheads are sold separately. Decimal gearheads are not available for V Series.
● Enter the gear ratio in the box (
) within the model name. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background
indicates rotation in the opposite direction.
● The speed is calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2
20% less than the
displayed value, depending on the size of the load.

 Gearmotor — Torque Table when Right-Angle Gearhead is Attached

Right-Angle Gearheads are available for World K Series only.
➝Page A-196

 Permissible Overhung Load and Permissible Thrust Load

Motor (Round shaft motor)➝Page A-11
Gearhead➝Page A-11

 Permissible Load Inertia J for Gearhead

➝Page A-12

A-88 Features A-68 System Configuration A-69 Specifications A-87

 Standard AC Motors
 Dimensions Scale 1/4, Unit = inch (mm)
Mounting screws are included with gearheads. Dimensions for screws➝A-223
 World K Series
◆ Lead Wire Type q 3/8 inch shaft motors are
also available. Contact
Motor Gearhead Round Shaft Type
your Oriental Motor
5RK40GN-AWU 5RK40A-AWU
5GN
KA Representative for more
5RK40GN-CWE 5RK40A-CWE
information.
Weight: 5.5 lb. (2.5 kg) Weight: 3.3 lb. (1.5 kg) Weight: 5.5 lb. (2.5 kg)

Introduction
d A019AU (5GN3KA
18KA) d A329
A019BU (5GN25KA
180KA)

4.13 (105) L 1.26 (32) 0.5000 00.0007 1/2" 1.46 (37) 0.3937 00.0006

Induction Reversible Synchronous

0.45 (11.4)

Motors
0.30 (7.5) 0.12 (12.700.018) □3.54 (□90) 0.08 0
(100.015) □3.54 (□90)
(3) 0.75 (2)

0.71 (18)
(19) .02
90
 4.0 40.5)

0.35 (9)
1.18

3.267700.0014
0.02

1.42
(36)
4.09 0.5) (30) ( 1 0

Motors
3.50 (89)

4

(8300.035)
(10

Motors
0.256 (6.5) 4 Holes 0.256 (6.5)4 Holes
3 Motor Leads 12 inch (300 mm) Length
22˚ 30'

Motors
Torque
UL Style 3271, AWG 20
22˚ 30'
5GN3KA~18KA: L = 1.65 (42)
5GN25KA~180KA: L = 2.36 (60)

Watertight
Motors
◆ Terminal Box Type w
Motor Gearhead Round Shaft Type

Magnetic
5RK40GN-AWTU 5RK40A-AWTU

Brake
5GN
KA
5RK40GN-CWTE 5RK40A-CWTE
Weight: 5.7 lb. (2.6 kg) Weight: 3.3 lb. (1.5 kg) Weight: 5.7 lb. (2.6 kg)
d A021AU (5GN3KA
18KA) d A330

Clutch &
Brake
A021BU (5GN25KA
180KA)

1.10 Max. 2.95 (75) 0.24 (6) 2.44 2.44

(28) (62) (62)
1.46

Brake
Pack
0.5000 00.0007 1/2" (37)
0.39370.0006
0
0.45 (11.4)

1.69
0

(43)
( )
1.69

0.75 (19) 12.70.018

(43)

0.08
0.98
(25)

(2) (1000.015)

Right-Angle
0.71(18)

Gearheads Accessories
0.35 (9)

2
3.26770.0014

0.0
1.42

0.02 1.18 4.09 ±0.5 )

(36)

4.09±0.5 )
3.50 (89)

(8300.035)
(30) 4
( 104 ( 10
0

Before Using
0.30 (7.5) 0.12 (3) 0.256 (6.5) 0.256 (6.5)

a Standard
AC Motor
4.13 (105) 4 Holes □3.54 (□90) 4 Holes □3.54 (□90)
L 1.26 (32)

5GN3KA~18KA: L = 1.65 (42)

5GN25KA~180KA: L = 2.36 (60)

 Use cable (VCTF) with a diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

 Decimal Gearhead (for World K Series)

5GN10XK Weight: 1.3 lb. (0.6 kg)
d A022
2.17 (55)
1.46 (37) 0.71 (18) □3.54 (□90)
0.08
(2)

0.02
4.09  .5)
3.26770.0014
(83 0.035)

0
(104
0

0.256 (6.5) 4 Holes

Dimensions A-89 Connection Diagrames A-91 List of Motor and Gearhead Combinations for V Series A-91 A-89
 Standard AC Motors
 V Series
◆ Lead Wire Type e
VHR540A-
U, VHR540C-
E (Combination Type)
Weight: 8.8 lb. (4.0 kg) including gearhead
Motor Model: VHR540A-GVH, VHR540C-GVH
Gearhead Model: GVH5G

d A203A (GVH5G5
18)
A203B (GVH5G30
90)
A203C (GVH5G120
300)
1/750 HP

4.13 (105) 1.65 (42) 0.7087 00.0007 Key and Key Slot (Scale 1/2)
1W

L
0.30 (7.5) 0.2
0
(180.018) □3.54 (□90) (The key is provided with the gearhead)

0.004
(5) 0.98

)
0.23620.0012

0.1
0
0.71 (18)

3 .5 0
(25)
1/125 HP

0.0016

0.138
.02

0
90 0.2362 0
 4.0 40.5) 0.9840.008
6W

)
60.03
0 0.040
( )

1.57
(40)
0.23620.0012

(
0
(1

0
6 0
3.50 (89)

(250.2) (60.03
0
)

(
1/50 HP
15 W

0.335 (8.5) 4 Holes

1/30 HP
25 W

3 Motor Leads 12 inch (300 mm) Length

22˚ 30'
UL Style 3271, AWG 20

GVH5G5~GVH5G18: L = 1.77 (45)

1/19 HP
40 W

GVH5G30~GVH5G90: L = 2.28 (58)

GVH5G120~GVH5G300: L = 2.52 (64)

◆ Terminal Box Type r

1/12 HP
60 W

VHR540AT-
U, VHR540CT-
E (Combination Type)

Weight: 9.0 lb. (4.1 kg) including gearhead
Motor Model: VHR540AT-GVH, VHR540CT-GVH
1/8 HP

Gearhead Model: GVH5G

90 W

d A212A (GVH5G5
18)
A212B (GVH5G30
90)
A212C (GVH5G120
300)
1.10 Max. 2.95 (75) 0.24 (6) 2.44 (62)
(28)
0.7087 00.0007 Key and Key Slot (Scale 1/2)
1.69 (43)

0
(180.018) (The key is provided with the gearhead)
(25)
0.98

0.004
0.98

)
0.23620.0012

0.1
0
0.71 (18)

3 .5 0
(25) 0.0016

0.138
.02
0

90 0.2362 0
 4.0 40.5)
(60.03)

0
(60.040
1.57

)
(40)

0.9840.008 0.23620.0012

(
1 0
(
0
3.50 (89)

0
(250.2) (60.03
0
)

0.30 (7.5) 0.2 (5) 0.335 (8.5)

1.65 (42) 4 Holes □3.54 (□90)
4.13 (105) L

GVH5G5~GVH5G18: L = 1.77 (45)

GVH5G30~GVH5G90: L = 2.28 (58)
GVH5G120~GVH5G300: L = 2.52 (64)

Use cable (VCTF) with the diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

A-90 Features A-68 System Configuration A-69 Specifications A-87

 Standard AC Motors
 Capacitor (included with the motors)
A Motor Capacitor Dimension inch (mm) Weight
Model Model

B0.39 (10)
A B C oz. (g)

B
5RK40GN-AW(T)U
5RK40A-AW(T)U CH120CFAUL 2.28 (58) 0.83 (21) 1.22 (31) 1.8 (50)
0.169 0.79

0.39 (4.5)
0.18
VHR540A(T)-
U
(4.3) (20)
0.24 5RK40GN-CW(T)E

(10)
AMP#187 (6) 5RK40A-CW(T)E CH35BFAUL 2.28 (58) 0.87 (22) 1.38 (35) 1.9 (55)

Introduction
VHR540C(T)-
E
0.16 (4)
C

● If you need to order a capacitor without a motor, add "-C" to the capacitor model name
shown. A capacitor cap is always included with a capacitor.

Induction Reversible Synchronous

Motors
 Connection Diagrams

Motors
Lead Wire Type Terminal Box Type
5RK40GN-AWU 5RK40GN-AWTU
5RK40GN-CWE 5RK40GN-CWTE

Motors
VHR540A-
U VHR540AT-
U
VHR540C-
E VHR540CT-
E

Motors
Torque
CCW CW CCW CW

CCW
Black SW Z2

Watertight
Motors
CW Red Line U2
Line Motor CW Motor
White U1
SW
CCW

Magnetic
Capacitor Protective Earth

Brake
Capacitor (P.E.)

Clutch &
● The direction of motor rotation is as viewed from the shaft end of the motor.

Brake
● CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Connection diagrams are also valid for the equivalent round shaft type.
● How to connect a capacitor➝Page A-225
Note:

Brake
Pack
● Connect a CR circuit to the forward/reverse select switch (SW) to protect the contact.
Connecting CR circuit, contact capacity➝Page A-226

Right-Angle
Gearheads Accessories
 Inner Connection Diagram for 4-Terminal Capacitor
Terminals of the capacitor are connected as shown in the
figure. For lead wire connection, use one lead wire per
terminal.

Before Using
a Standard
AC Motor
 List of Motor and Gearhead Combinations for V Series
Model numbers for motor and gearhead combinations are shown below.
Model Motor Model Gearhead Model
VHR540A-
U VHR540A-GVH
VHR540C-
E VHR540C-GVH
GVH5G

VHR540AT-
U VHR540AT-GVH
VHR540CT-
E VHR540CT-GVH
● Enter the gear ratio in the box (
) within the model name.

Dimensions A-89 Connection Diagrames A-91 List of Motor and Gearhead Combinations for V Series A-91 A-91
 Standard AC Motors
Reversible Motors
60 W (1/12 HP)
Frame Size:
3.54 in. (
90 mm)
1/750 HP

World K Series V Series/Combination Type

1W

(Gearhead Sold Separately) (Pre-assembled Gearmotor)

 Specifications — 30 Minute Rating

R r VC
1/125 HP

 World K Series (General Purpose)

6W

Model
Upper Model Name: Pinion Shaft Type Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
1/50 HP
15 W

Lower Model Name( ): Round Shaft Type

Lead Wire Type Terminal Box Type
HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 1 Dimension 2
1/30 HP
25 W

Single-Phase 110 60
T 5RK60GU-AWU 5RK60GU-AWTU 1.24 53 380 57 405 1450 20
(5RK60A-AWU) (5RK60A-AWTU) Single-Phase 115 60
Single-Phase 220 50 0.6 59 420 69 490 1200
1/19 HP

1/12 60
40 W

Single-Phase 220 60 0.67 53 380 57 405 1450

T 5RK60GU-CWE 5RK60GU-CWTE 5
(5RK60A-CWE) (5RK60A-CWTE) Single-Phase 230 50 0.61 66 470 69 490 1200
Single-Phase 230 60 0.67 53 380 57 405 1450
1/12 HP
60 W

TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the friction brake installed.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
1/8 HP
90 W

When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-10
● Details of Safety Standards➝Page G-2

 V Series (Quiet Operation, High Strength, Long Life) UVC

Model
Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor
Combination Type

Lead Wire Type Terminal Box Type

HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 3 Dimension 4
Single-Phase 110 60
T VHR560A-
U VHR560AT-
U 1.24 53 380 57 405 1450 20
Single-Phase 115 60
Single-Phase 220 50 0.6 59 420 69 490 1200
1/12 60
Single-Phase 220 60 0.67 53 380 57 405 1450
T VHR560C-
E VHR560CT-
E 5
Single-Phase 230 50 0.61 66 470 69 490 1200
Single-Phase 230 60 0.67 53 380 57 405 1450
TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the brake applied.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-12
● Details of Safety Standards➝Page G-2
● Models above are provided as combination types with motor and gearhead pre-assembled.
● Enter gear ratio in the box (
) within the model name.
● The values in the table are for the motor only.

 Gearheads for World K Series (Sold Separately)

 Parallel Shaft  Right-Angle
Gearhead Model Gear Ratio Type Gearhead Model Gear Ratio
5GU
KA 3
180 Hollow Shaft 5GU
RH 3.6
180
5GU10XKB (Decimal Gearhead) Solid Shaft 5GU
RAA 3
180
● Enter the gear ratio in the box (
) within the model name. ● Enter the gear ratio in the box (
) within the model name.
● Right-Angle Gearheads➝Page A-189

A-92 Features A-68 System Configuration A-69 Specifications A-92

 Standard AC Motors
 Gearmotor — Torque Table
 World K Series (General Purpose)
The maximum permissible torque with a decimal gearhead with a gear ratio of 10:1 is 177 lb-in (20 N·m).

◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180

Introduction
5RK60GU-AWU
5RK60GU-AWTU 8.6 10.6 14.1 17.7 22 26 32 38 46 59 70 84 118 141 158 177 177 177 177 177
5GU
KA
5RK60GU-CWE 0.98 1.2 1.6 2.0 2.5 3.0 3.7 4.4 5.3 6.7 8.0 9.6 13.4 16.0 17.9 20 20 20 20 20
5RK60GU-CWTE

Induction Reversible Synchronous

Motors
◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m
Speed r/min 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Model

Motors
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
5RK60GU-CWE 10.6 12.3 17.7 21 26 31 39 47 56 71 85 102 143 171 177 177 177 177 177 177
5GU
KA
5RK60GU-CWTE 1.2 1.4 2.0 2.4 3.0 3.6 4.5 5.4 6.4 8.1 9.7 11.6 16.2 19.4 20 20 20 20 20 20

Motors
 V Series (Quiet Operation, High Strength, Long Life)
◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Motors
Torque
Speed r/min 360 300 200 120 100 60 50 30 20 15 10 6
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300
VHR560A-
U

Watertight
VHR560AT-
U 15.9 19.4 29 48 58 92 110 184 260 260 260 260

Motors
VHR560C-
E 1.8 2.2 3.3 5.5 6.6 10.4 12.5 20.9 30 30 30 30
VHR560CT-
E

Magnetic
Brake
◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m
Speed r/min 300 250 166 100 83 50 41 25 16 12.5 8.3 5
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180 300

Clutch &
Brake
VHR560C-
E 19.4 23 35 58 69 111 134 220 260 260 260 260
VHR560CT-
E 2.2 2.6 4 6.6 7.9 12.6 15.2 25.3 30 30 30 30

Brake
Pack
● Gearheads and decimal gearheads are sold separately. Decimal gearheads are not available for V Series.
● Enter the gear ratio in the box (
) within the model name. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background

Right-Angle
indicates rotation in the opposite direction.

Gearheads Accessories
● The speed is calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2
20% less than the
displayed value, depending on the size of the load.

 Gearmotor — Torque Table when Right-Angle Gearhead is Attached

Right-Angle Gearheads are available for World K Series only.

Before Using
a Standard
AC Motor
➝Page A-196

 Permissible Overhung Load and Permissible Thrust Load

Motor (Round shaft motor)➝Page A-11
Gearhead➝Page A-11

 Permissible Load Inertia J for Gearhead

➝Page A-12

Dimensions A-94 Connection Diagrames A-96 List of Motor and Gearhead Combinations for V Series A-96 A-93
 Standard AC Motors
 Dimensions Scale 1/4, Unit = inch (mm)
Mounting screws are included with gearheads. Dimensions for screws➝A-223
 World K Series
◆ Lead Wire Type q
Motor Gearhead Round Shaft Type
5RK60GU-AWU 5RK60A-AWU
5GU
KA
5RK60GU-CWE 5RK60A-CWE
Weight: 5.9 lb. (2.7 kg) Weight: 3.3 lb. (1.5 kg) Weight: 5.9 lb. (2.7 kg)
1/750 HP
1W

d A026U (5GU3KA
180KA) d A331

0.6250 00.0005 5/8"
1/125 HP

4.72 (120) 2.56 (65) 1.50 (38) □3.54 (□90)

(15.875 00.011)
6W

1.46 (37) 0.4724 00.0007

0.30 0.28 (7) □3.54 (□90)
0.08 0
(7.5) 1.125 (2)
( 120.018 )

0.71 (18)
(28.58)
1/50 HP
15 W

0.43 (11)
2
0.0 0.02
4.09  0.5) 1.18

1.34

3.2677 00.0014
4.09 )

(34)
□3.54 (□90)

0 4  (30)
 0.5

)
1 4
( (10

(830.035
0
1/30 HP
25 W

0.256 (6.5) 4 Holes 0.256 (6.5)

1/19 HP

4 Holes
40 W

3 Motor Leads 12 inch (300 mm) Length

22˚ 30'
UL Style 3271, AWG 20
22 30
1/12 HP

Key and Key Slot (Scale 1/2)

60 W

(The key is provided with the gearhead)

)
0.004

0.1
2.743 0
0.18750.0012

0
)

0.0016
4.7630.03

0.108
0

0.1875
0

0
1/8 HP

0
90 W

0.18750.0012 0.040
1.1250.008 ( )
(

4.763 0
(28.580.2) 0
(4.7630.03)
(

◆ Terminal Box Type w

Motor Gearhead Round Shaft Type
5RK60GU-AWTU 5RK60A-AWTU
5GU
KA
5RK60GU-CWTE 5RK60A-CWTE
Weight: 6.2 lb. (2.8 kg) Weight: 3.3 lb. (1.5 kg) Weight: 6.2 lb. (2.8 kg)
d A027U (5GU3KA
180KA) d A332

1.10 Max. 2.95 (75) 0.24 (6) 2.44 (62) 2.44

(28) (62)
0
0.6250 0.0005 5/8"
0
0.4724 0.0007

1.69
0
(15.875 0.011 )

(43)
1.69
(43)
0.98
(25)

1.125 ( 12 0.018

0
)
0.71 (18)

(28.58)
0.43 (11)

0.0
2 1.18 0.02
1.34

 4.09 0.5) 4.09 )

3.2677 0.0014
(34)
□3.54 (□90)

(30) 0.5
( 104 (104
)
0

83 0.035
0
(

0.30 (7.5) 0.28 (7) 0.256 (6.5) 0.08 (2) 0.256 (6.5)
4 Holes □3.54 (□90) 4 Holes
4.72 (120) 2.56 (65) 1.50 (38) 1.46 (37) □3.54(□90)

Use cable (VCTF) with a diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

Key and Key Slot (Scale 1/2)

(The key is provided with the gearhead)
)
0.004

0.1
2.743 0
0.18750.0012

0
)

0.0016
4.7630.03

0.108
0

0.1875
0

0
0
0.18750.0012 0.040
1.1250.008 ( )
(

4.763 0
(28.580.2) 0
(4.7630.03)
(

A-94 Features A-68 System Configuration A-69 Specifications A-92

 Standard AC Motors
 Decimal Gearhead (for World K Series)
5GU10XKB Weight: 1.3 lb. (0.6 kg)
d A029
2.40 (61)
1.57 (40) 0.83 (21) □3.54 (□90)
0.08
(2)
3.2677 00.0014
0.02
4.09  )

Introduction
(83 0.035)
0.5
(104
0

Induction Reversible Synchronous

Motors
0.425 (10.8) 4 Holes

Motors
 V Series
◆ Lead Wire Type e
VHR560A-
U, VHR560C-
E (Combination Type)

Motors
Weight: 9.2 lb. (4.2 kg) including gearhead
Motor Model: VHR560A-GVH, VHR560C-GVH
Gearhead Model: GVH5G

Motors
Torque
d A244A (GVH5G5
18)
A244B (GVH5G30
90)
A244C (GVH5G120
300)
4.72 (120) L 1.65 (42) 0.7087 00.0007 Key and Key Slot (Scale 1/2)

Watertight
Motors
0.30 (7.5) 0.2 0
(180.018) □3.54 (□90) (The key is provided with the gearhead)

0.004
(5) 0.98

)
0.23620.0012

0.1
0
0.71 (18)

3 .5 0
(25) 0.0016

0.138
.02

0
90 0.2362 0
 4.0 40.5) 0.9840.008

Magnetic
60.03
0
(60.040)
1.57

0.23620.0012
(40)

(
0

Brake
( 1

0

3.54 (
90)

0
(250.2) (60.03
0
)

Clutch &
Brake
0.335 (8.5) 4 Holes
3 Motor Leads 12 inch (300 mm) Length
22˚ 30'

Brake
Pack
UL Style 3271, AWG 20

GVH5G5~GVH5G18: L = 1.77 (45)

Right-Angle
Gearheads Accessories
GVH5G30~GVH5G90: L = 2.28 (58)
GVH5G120~GVH5G300: L = 2.52 (64)

◆ Terminal Box Type r

VHR560AT-
U, VHR560CT-
E (Combination Type)
Weight: 9.5 lb. (4.3 kg) including gearhead
Motor Model: VHR560AT-GVH, VHR560CT-GVH

Before Using
Gearhead Model: GVH5G

a Standard
AC Motor
d A245A (GVH5G5
18)
A245B (GVH5G30
90)
A245C (GVH5G120
300)
1.10 Max. 2.95 (75) 0.24 (6) 2.44 (62)
(28)
0.7087 00.0007 Key and Key Slot (Scale 1/2)
1.69 (43)

0
(180.018) (The key is provided with the gearhead)
0.004
(25)
0.98

0.98
)
0.23620.0012

0.1
0
0.71 (18)

3 .5 0

(25) 0.0016
0.138

.02
0

90 0.2362 0
 4.0 40.5) 0.9840.008
(60.03)

0 0.040
1.57

( )
(40)

0.23620.0012
(

 1 0
0

6 0

3.54 (
90)

( (250.2) ( 0
60.03 )

0.30 (7.5) 0.2 (5) 0.335 (8.5)

1.65 (42) 4 Holes
4.72 (120) L □3.54 (□90)

GVH5G5~GVH5G18: L = 1.77 (45)

GVH5G30~GVH5G90: L = 2.28 (58)
GVH5G120~GVH5G300: L = 2.52 (64)

Use cable (VCTF) with a diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

Dimensions A-94 Connection Diagrames A-96 List of Motor and Gearhead Combinations for V Series A-96 A-95
 Standard AC Motors
 Capacitor (included with the motors)
2.28 Motor Capacitor Weight
(58) Model Model oz. (g)

1.73 (44)
1.14
(29)
5RK60GU-AW(T)U
5RK60A-AW(T)U CH200CFAUL 3.4 (95)
0.169 VHR560A(T)-
U

0.28
(7)
0.79
(4.3) (20)
5RK60GU-CW(T)E
0.24 5RK60A-CW(T)E CH50BFAUL 3.0 (85)
0.39
(10)
1/750 HP

AMP#187 (6) VHR560C(T)-
E

1W

1.61 (41)
● If you need to order a capacitor without a motor, add
0.16 (4)

R0
.
(10 39 "-C" to the capacitor model name shown.
)
1/125 HP

A capacitor cap is included with a capacitor.

6W

 Connection Diagrams
1/50 HP
15 W

Lead Wire Type Terminal Box Type

5RK60GU-AWU 5RK60GU-AWTU
1/30 HP
25 W

5RK60GU-CWE 5RK60GU-CWTE
VHR560A-
U VHR560AT-
U
VHR560C-
E VHR560CT-
E
1/19 HP
40 W

CCW CW CCW CW

CCW
1/12 HP

SW Z2
60 W

Black
CW Red Line U2
Line Motor CW Motor
White U1
SW
CCW
1/8 HP
90 W

Capacitor Protective Earth

Capacitor (P.E.)

● The direction of motor rotation is as viewed from the shaft end of the motor.
● CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Connection diagrams are also valid for the equivalent round shaft type.
● How to connect a capacitor➝Page A-225
Note:
● Connect a CR circuit to the forward/reverse select switch (SW) to protect the contact.
Connecting CR circuit, contact capacity➝Page A-226

 Inner Connection Diagram for 4-Terminal Capacitor

Terminals of the capacitor are connected as shown in the
figure. For lead wire connection, use one lead wire per
terminal.

 List of Motor and Gearhead Combinations for V Series

Model numbers for motor and gearhead combinations are shown below.
Model Motor Model Gearhead Model
VHR560A-
U VHR560A-GVH
VHR560C-
E VHR560C-GVH
GVH5G

VHR560AT-
U VHR560AT-GVH
VHR560CT-
E VHR560CT-GVH
● Enter the gear ratio in the box (
) within the model name.

A-96 Features A-68 System Configuration A-69 Specifications A-92

 Standard AC Motors
Reversible Motors
90 W (1/8 HP)
Frame Size:
3.54 in. (
90 mm)

Introduction
World K Series V Series/Combination Type
(Gearhead Sold Separately) (Pre-assembled Gearmotor)

 Specifications — 30 Minute Rating

R r VC

Induction Reversible Synchronous

Motors
 World K Series (General Purpose)
Model
Upper Model Name: Pinion Shaft Type Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor

Motors
Lower Model Name( ): Round Shaft Type
Lead Wire Type Terminal Box Type
HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F
Dimension 1 Dimension 2

Motors
Single-Phase 110
T 5RK90GU-AWU 5RK90GU-AWTU 60 1.81 83 590 83 585 1500 30
(5RK90A-AWU) (5RK90A-AWTU) Single-Phase 115
Single-Phase 220 50 0.82 85 600 103 730 1200
1/8 90

Motors
Torque
Single-Phase 220 60 0.96 83 590 85 605 1450
T 5RK90GU-CWE 5RK90GU-CWTE 7
(5RK90A-CWE) (5RK90A-CWTE) Single-Phase 230 50 0.82 85 600 103 730 1200
Single-Phase 230 60 0.96 83 590 85 605 1450

Watertight
Motors
TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the friction brake installed.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.

Magnetic
Brake
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-10
● Details of Safety Standards➝Page G-2

Clutch &
UC

Brake
 V Series (Quiet Operation, High Strength, Long Life)
Model
Output Power Voltage Frequency Current Starting Torque Rated Torque Rated Speed Capacitor

Brake
Pack
Combination Type

Lead Wire Type Terminal Box Type

HP W VAC Hz A oz-in mN · m oz-in mN · m r/min F

Right-Angle
Gearheads Accessories
Dimension 3 Dimension 4
Single-Phase 110
T VHR590A-
U VHR590AT-
U 60 1.81 83 590 83 585 1500 30
Single-Phase 115
Single-Phase 220 50 0.82 85 600 103 730 1200
1/8 90
Single-Phase 220 60 0.96 83 590 85 605 1450
T VHR590C-
E VHR590CT-
E 7
Single-Phase 230 50 0.82 85 600 103 730 1200

Before Using
Single-Phase 230 60 0.96 83 590 85 605 1450

a Standard
AC Motor
TContains a built-in thermal protector. If a motor overheats for any reason, the thermal protector is opened and the motor stops. When the motor temperature drops,
the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
● Values shown for rated torque and starting torque are measured for operation without the brake applied.
● The "U" and "E" at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.➝Page G-12
● Details of Safety Standards➝Page G-2
● Models above are provided as combination types with motor and gearhead pre-assembled.
● Enter gear ratio in the box (
) within the model name.
● The values in the table are for the motor only.

 Gearheads for World K Series (Sold Separately)

 Parallel Shaft  Right-Angle
Gearhead Model Gear Ratio Type Gearhead Model Gear Ratio
5GU
KA 3
180 Hollow Shaft 5GU
RH 3.6
180
5GU
KHA (High Power Type) 50
180 Solid Shaft 5GU
RAA 3
180
5GU10XKB (Decimal Gearhead) [for 5GU
KA] ● Enter the gear ratio in the box (
) within the model name.
5GU10XK (Decimal Gearhead) [for 5GU
KHA] ● Right-Angle Gearheads➝Page A-189
● Enter the gear ratio in the box (
) within the model name.

Dimensions A-99 Connection Diagrames A-101 List of Motor and Gearhead Combinations for V Series A-102 A-97
 Standard AC Motors
 Gearmotor — Torque Table
 World K Series (General Purpose)
The maximum permissible torque when a decimal gearhead with a gear ratio of 10:1 is attached are as follows;
5GU
KA: 177 lb-in (20 N m)
5GU
KHA: 260 lb-in (30 N m)

◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
1/750 HP

Model
1W

Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180

12.3 15 21 24 31 38 46 56 68 85 102 123 170 177 177 177 177 177 177 177
5GU
KA
5RK90GU-AWU 1.4 1.7 2.4 2.8 3.6 4.3 5.3 6.4 7.7 9.7 11.6 13.9 19.3 20 20 20 20 20 20 20
1/125 HP

5RK90GU-AWTU
6W

170 200 220 260 260 260 260 260

5GU
KHA — — — — — — — — — — — —
19.3 23.2 25.9 30 30 30 30 30
13.2 15.9 22 25 32 38 48 58 69 88 106 127 177 177 177 177 177 177 177 177
5GU
KA
1/50 HP

1.5 1.8 2.5 2.9 3.7 4.4 5.5 6.6 7.9 10.0 12.0 14.4 20 20 20 20 20 20 20 20
15 W

5RK90GU-CWE
5RK90GU-CWTE 177 210 230 260 260 260 260 260
5GU
KHA — — — — — — — — — — — —
20 24 26.8 30 30 30 30 30
1/30 HP
25 W

● KA type is standard gearhead. KHA type is high-powered gearhead.

◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

1/19 HP
40 W

Speed r/min 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Model
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
15.9 18.5 26 30 38 46 59 70 84 106 128 153 177 177 177 177 177 177 177 177
5GU
KA
1/12 HP

1.8 2.1 3.0 3.5 4.4 5.3 6.7 8.0 9.6 12.0 14.5 17.3 20 20 20 20 20 20 20 20
60 W

5RK90GU-CWE
5RK90GU-CWTE 210 250 260 260 260 260 260 260
5GU
KHA — — — — — — — — — — — —
24.1 28.9 30 30 30 30 30 30
1/8 HP
90 W

● KA type is standard gearhead. KHA type is high-powered gearhead.

 V Series (Quiet Operation, High Strength, Long Life)

◆ Single-Phase 115/230 VAC 60 Hz Unit = Upper values: lb-in/Lower values: N·m
Speed r/min 360 300 200 120 100 60 50 30 20 15 10
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180
VHR590A-
U 23 28 41 69 80 133 160 260 350 350 350
VHR590AT-
U 2.6 3.2 4.7 7.9 9.1 15.1 18.1 30.2 40 40 40
VHR590C-
E 23 29 43 72 83 138 165 270 350 350 350
VHR590CT-
E 2.7 3.3 4.9 8.2 9.4 15.6 18.7 31.2 40 40 40

◆ Single-Phase 230 VAC 50 Hz Unit = Upper values: lb-in/Lower values: N·m

Speed r/min 300 250 166 100 83 50 41 25 16 12.5 8.3
Model
Gear Ratio 5 6 9 15 18 30 36 60 90 120 180
VHR590C-
E 29 34 52 87 100 166 200 330 350 350 350
VHR590CT-
E 3.3 3.9 5.9 9.9 11.3 18.8 22.6 37.7 40 40 40

● Gearheads and decimal gearheads are sold separately. Decimal gearheads are not available for V Series.
● Enter the gear ratio in the box (
) within the model name. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background
indicates rotation in the opposite direction.
● The speed is calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2
20% less than the
displayed value, depending on the size of the load.

 Gearmotor — Torque Table when Right-Angle Gearhead is Attached

Right-Angle Gearheads are available for World K Series only.
➝Page A-196

 Permissible Overhung Load and Permissible Thrust Load

Motor (Round shaft motor)➝Page A-11
Gearhead➝Page A-11

 Permissible Load Inertia J for Gearhead

➝Page A-12

A-98 Features A-68 System Configuration A-69 Specifications A-97

 Standard AC Motors
 Dimensions Scale 1/4, Unit = inch (mm)
Mounting screws are included with gearheads. Dimensions for screws➝A-223
 World K Series
◆ Lead Wire Type q
Motor Gearhead Round Shaft Type
5RK90GU-AWU 5RK90A-AWU
5GU
KA
5RK90GU-CWE 5RK90A-CWE
Weight: 7.0 lb. (3.2 kg) Weight: 3.3 lb. (1.5 kg) Weight: 7.0 lb. (3.2 kg)

Introduction
d A035U (5GU3KA
180KA) d A333

5.31 (135) 2.56 (65) 1.50 (38) □3.54 (□90)

0.6250 0.0005
0
5/8" 1.46 (37) 0.4724 00.0007
0.30 0.28 (7) □3.54 (□90)

Induction Reversible Synchronous

(15.875 0
) 0.08 (1200.018)

Motors
(7.5) 1.125 0.011
(2)

0.71(18)
(28.58)

0.43 (11)
1.34
1.18 0.02

(34)
4.09 0.5)

3.26770.0014
□3.54 (□90)

(30) 
(104

Motors
0

(830.035
0
0.02
4.09 0.5)
0 4
( 1

Motors
0.256 (6.5) 0.256 (6.5)4 Holes
4 Holes
3 Motor Leads 12 inch (300 mm) Length
UL Style 3271, AWG 20 22˚ 30'

Motors
Torque
22˚ 30'
Key and Key Slot (Scale 1/2)
(The key is provided with the gearhead)

Watertight
0.004

0.1
)

Motors
0.1875 0.0012

2.743 0
0.108 0
)
4.763 0.03

0.0016
0

0
0.1875 0
0.1875 0.0012 0.040
1.125 0.008 ( )
(

4.763 0
(28.58 0.2)

Magnetic
0
(4.763 0.03)
(

Brake
Clutch &
Brake
◆ Terminal Box Type w
Motor Gearhead Round Shaft Type
5RK90GU-AWTU 5RK90A-AWTU
5GU
KA

Brake
Pack
5RK90GU-CWTE 5RK90A-CWTE
Weight: 7.3 lb. (3.3 kg) Weight: 3.3 lb. (1.5 kg) Weight: 7.3 lb. (3.3 kg)
d A036U (5GU3KA
180KA) d A334

Right-Angle
Gearheads Accessories
1.10 Max. 2.95 (75) 0.24 (6) 2.44 2.44
(28) (62) (62)
0
0.6250 –0.0005 5/8"
0
0
0.4724 –0.0007

1.69
1.69

(43)
(43)

(15.875 –0.011)
0.98
(25)

0
1.125 (12 –0.018)
0.71 (18)

(28.58)
0.43 (11)

Before Using
a Standard
2

AC Motor
1.18
1.34

0.0
(34)

 4.09 0.5)
□3.54 (□90)

–0.0014

–0.035)

(30) (104
0

0
3.2677
(83

2
0.0
 4.09 0.5)
(104

0.30 (7.5) 0.28 (7) 0.08 (2) 0.256 (6.5)

5.31 (135) 2.56 (65) 1.50 (38) 0.256 (6.5) □3.54 (□90) 1.46 (37) 4 Holes □3.54 (□90)
4 Holes

Use cable (VCTF) with a diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

Key and Key Slot (Scale 1/2)

(The key is provided with the gearhead)
0.004

0.1
)
0.1875 0.0012

2.743 0
0
)
4.763 0.03

0.0016
0

0.108
0

0
0.1875 0
0.1875 0.0012 0.040
1.125 0.008 ( )
(

4.763 0
(28.58 0.2) 0
(4.763 0.03)
(

Dimensions A-99 Connection Diagrames A-101 List of Motor and Gearhead Combinations for V Series A-102 A-99
 Standard AC Motors
 Decimal Gearhead (for World K Series)
5GU10XKB (for 5GU
KA)
5GU10XK (for 5GU
KHA)
Weight: 1.3 lb. (0.6 kg)
d A029
2.40 (61)
1.57 (40) 0.83 (21) □3.54 (□90)
0.08
(2)
1/750 HP
1W

3.2677 00.0014

0.02
4.09  )
(83 0.035)
0.5
(104
0
1/125 HP
6W

5GU10XKB: 0.425 (10.8) 4 Holes

1/50 HP
15 W

5GU10XK: 0.256 (6.5) 4 Holes

 High-Power Type Gearhead (for World K Series)

1/30 HP
25 W

5GU
KHA Weight: 4.2 lb. (1.9 kg)

d A038U
1/19 HP

3.35 (85) 1.65 (42)

Key and Key Slot (Scale 1/2)
40 W

0.39 (10) 0.47 (12) 0.28 (7) 0.7500 00.0008

1.93 (49) (The key is provided with the gearhead)
0
1.125 ( 19.050.021 )
(28.58) 0.188 00.0020 0.188 00.0020
0.71 (18)

1.125
1/12 HP

0 0.051
(28.58)
60 W

(4.763 0.051 ) (4.763 0 )

□3.54 (□90)

(40)
1.57

1.93 (49)

(2.69)
0.106
1/8 HP

(4.763 0.051)
90 W

0.188 00.0020
.02
9 0
 4.0 ± 0.5)

0
4
( 10
M6 P14 Places 0.335 (8.5)4 Holes

 V Series
◆ Lead Wire Type e
VHR590A-
U, VHR590C-
E (Combination Type)
Weight: 10 lb. (4.7 kg) including gearhead
Motor Model: VHR590A-GVR, VHR590C-GVR
Gearhead Model: GVR5G

d A397A (GVR5G5
15)
A397B (GVR5G18
36)
A397C (GVR5G60
180)
0
0.70870.0007
5.31 (135) L 1.65 (42) (180.018
0
)
3.54 (
90) Key and Key Slot (Scale 1/2)
0.30 (7.5) 0.2 0.335 (8.5) (The key is provided with the gearhead)

0.004
(5) 0.98
0.23620.0012

4Holes

0 )
0.71 (18)

(3.5 0.1
(25)
0

0.0016 0.138
0.2362
(600.03)

0
0 0.040
1.57

( )
(40)

0.984
0.008

3.54 (
90)

0.23620.0012 6 0
(25
0.2) (600.03)
.02
9
0 )
 4.0 4
0.5
0
( 1

3 Motor Leads 12 inch (300mm) Length

UL Style 3271, AWG 20
2230'
GVR5G5~GVR5G15: L = 1.77 (45)
GVR5G18~GVR5G36: L = 2.28 (58)
GVR5G60~GVR5G180: L = 2.76 (70)

A-100 Features A-68 System Configuration A-69 Specifications A-97

 Standard AC Motors
◆ Terminal Box Type r
VHR590AT-
U, VHR590CT-
E (Combination Type)
Weight: 11 lb. (4.8 kg) including gearhead
Motor Model: VHR590AT-GVR, VHR590CT-GVR
Gearhead Model: GVR5G

d A398A (GVR5G5
15)
A398B (GVR5G18
36)
A398C (GVR5G60
180)
1.1 (28) Max. 2.95 (75) 0.24 (6) 2.44 (62)

Introduction
0.98 (25)

0
0.70870.0007 Key and Key Slot (Scale 1/2)

1.69 (43)
(180.018
0
) (The key is provided with the gearhead)

0.004

Induction Reversible Synchronous

0.23620.0012

Motors
0.98

)
0.71 (18)

0
0.1
3.5 0
(25)

0
0.0016

0.138
0.2362

)
0

60.03
0
(6 0.040)

3.54 (
90)

1.57
0.984
0.008 0.23620.0012

(40)

(
0
(25
0.2) (600.03)

Motors
.02
9
0 )
 4.0 4
0.5
 10
(

Motors
0.30 (7.5) 0.2 (5) 0.335 (8.5)
5.31 (135) L 1.65 (42) 4Holes

3.54 (
90)

Motors
Torque
GVR5G5~GVR5G15: L = 1.77 (45)
GVR5G18~GVR5G36: L = 2.28 (58)
GVR5G60~GVR5G180: L = 2.76 (70)

Watertight
Motors
Use cable (VCTF) with a diameter of 0.24 inch (6 mm)
0.47 inch (12 mm).
Details of Terminal Box➝Page A-224

Magnetic
Brake
 Capacitor (included with the motors)
2.28 Motor Capacitor Weight
(58)
Model Model oz. (g)

Clutch &
Brake
1.97(50)
1.38
(35)

5RK90GU-AW(T)U
5RK90A-AW(T)U CH300CFAUL 4.9 (140)
0.169 VHR590A(T)-
U
0.28
0.39 (7)

0.79

Brake
Pack
(4.3) (20)
5RK90GU-CW(T)E
0.24
(10)

(6)
5RK90A-CW(T)E CH70BFAUL 4.6 (130)
AMP#187
VHR590C(T)-
E

Right-Angle
Gearheads Accessories
1.97 (50)
0.16 (4)

R0 ● If you need to order a capacitor without a motor, add

.
(10 39 "-C" to the capacitor model name shown.
)
A capacitor cap is included with a capacitor.

 Connection Diagrams

Before Using
a Standard
AC Motor
Lead Wire Type Terminal Box Type  Inner Connection Diagram for 4-Terminal Capacitor
5RK90GU-AWU 5RK90GU-AWTU Terminals of the capacitor are connected as shown in the
5RK90GU-CWE 5RK90GU-CWTE figure. For lead wire connection, use one lead wire per
VHR590A-
U VHR590AT-
U
VHR590C-
E VHR590CT-
E terminal.

CCW CW CCW CW

CCW
Black SW Z2
CW Red Line U2
Line Motor CW Motor
White U1
SW
CCW
Capacitor Protective Earth
Capacitor (P.E.)

● The direction of motor rotation is as viewed from the shaft end of the motor.
● CW represents the clockwise direction, while CCW represents the counterclockwise direction.
● Connection diagrams are also valid for the equivalent round shaft type.
● How to connect a capacitor➝Page A-225
Note:
● Connect a CR circuit to the forward/reverse select switch (SW) to protect the contact.
Connecting CR circuit, contact capacity➝Page A-226

Dimensions A-99 Connection Diagrames A-101 List of Motor and Gearhead Combinations for V Series A-102 A-101
 Standard AC Motors
 List of Motor and Gearhead Combinations for V Series
Model numbers for motor and gearhead combinations are shown below.
Model Motor Model Gearhead Model
VHR590A-
U VHR590A-GVR
VHR590C-
E VHR590C-GVR
GVR5G

VHR590AT-
U VHR590AT-GVR
VHR590CT-
E VHR590CT-GVR
● Enter the gear ratio in the box (
) within the model name.
1/750 HP
1W
1/125 HP
6W
1/50 HP
15 W
1/30 HP
25 W
1/19 HP
40 W
1/12 HP
60 W
1/8 HP
90 W

A-102