Scribd
Upload
112 views

Speciality Magnetic Components: Miniature Hall Effect Current Transformer Type HTP50CPT/2K

The HTP50CPT/2k is a miniature Hall effect current transformer suitable for measuring currents up to 50A. It provides galvanic isolation between the primary conductor and external load resistance. It has a smaller volume and footprint than existing models in the HTP range. The transformer can measure currents with high accuracy and fast response for applications such as variable speed drives, UPS systems, and power factor monitoring.

Uploaded by

Yahya El Sadany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views

Speciality Magnetic Components: Miniature Hall Effect Current Transformer Type HTP50CPT/2K

The HTP50CPT/2k is a miniature Hall effect current transformer suitable for measuring currents up to 50A. It provides galvanic isolation between the primary conductor and external load resistance. It has a smaller volume and footprint than existing models in the HTP range. The transformer can measure currents with high accuracy and fast response for applications such as variable speed drives, UPS systems, and power factor monitoring.

Uploaded by

Yahya El Sadany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Speciality Magnetic Components

QUALIFIED TO ISO 9001:2008

Miniature Hall Effect Current Transformer Type HTP50CPT/2K

The HTP50CPT/2k is a closed loop Hall Effect Current Transformer suitable for measuring currents
up to 50A. The product provides an output current into an external load resistance which is
galvanically isolated from the primary conductor. All contacts, including the primary, are designed
for PCB mounting.

The HTP50CPT/2k complements the existing HTP range giving comparable accuracy in a
substantially smaller volume, and a smaller footprint. There are three separate primary conductors
which should be connected in parallel to give the full rated current.

Features Benefits

• Miniature Package • Small PCB Footprint


• 5kV Proof Stress • Galvanic Isolation
• Fast Response • High Accuracy
• Contacts Via PCB • Ease Of Assembly
• Designed In Quality • High Reliability

Applications

• Variable Speed Drives • Overcurrent Protection


• UPS Systems • Robotics
• D.C Power Supplies • Frequency Inverters
• Low Frequency Current Measurement • Power Factor Monitoring

As part of our policy of continuous product improvement we reserve the right to make modifications to this product without prior
notice.
TECHNICAL DATA
Nominal Primary Current 50A
Measurement Range ±110A peak
Turns Ratio (primaries in parallel) 2000:1
Nominal Power Supply ±15V ±5%
Supply Current 16mA per rail + output current
Load Resistance Range 0 to 85 Ù
Operating Temperature Range 0 to +85°C
Storage Temperature Range -25°C to +90°C

SPECIFICATION
Linearity 0.1% of nominal primary current
Overall accuracy 0.5% of nominal primary current
Output Offset Current <±100µA at primary current =0
Output Offset Current After Overload <±250µA at primary current =0
Zero Offset /Temperature < 3µA/°C
Zero Offset/Supply Variation < 2µA/V
Coil Resistance at 25°C 96Ù
Primary Conductor Resistance (each
conductor) 300µÙ
Bandwidth (1dB) DC to 70kHz
di/dt following >50A/µs
Delay time 0.4µS
dV/dt Immunity 10kV/µs
Proof Stress Voltage 5kV a.c., r.m.s, 50Hz for 1minute
Creepage Distance 7.4 mm
Clearance Distance 7.4 mm
GENERAL DATA
Weight 11.4g nominal
Housing PBT 15% Glass Filled
Flammability Rating V0 , CTI Rating >140
Mounting Direct mounting to PCB by 9 pins
Primary conductor material Copper Tin Plated
Signal Sense Positive output obtained when current flows as
shown by arrow.

DIMENSIONS
30.5

15.5 11.43 - + o/p


20.5
2.04 3.95

5.55 2.54 (2 pl.)

1.0 x 1.3 (6 pl.) 0.7 x 0.6 (3 pl.) 23.33 2.54 (2 pl.)

You might also like