File: /home/djordje/spl.

txt Page 1 of 19

SPLAT!(1) KD2BD Software SPLAT!(1)

NAME
splat An RF Signal Propagation, Loss, And Terrain analysis tool

SYNOPSIS
splat [-t transmitter_site.qth] [-r receiver_site.qth] [-c rx antenna
height for LOS coverage analysis (feet/meters) (float)] [-L rx antenna
height for Longley-Rice coverage analysis (feet/meters) (float)] [-p
terrain_profile.ext] [-e elevation_profile.ext] [-h height_profile.ext]
[-H normalized_height_profile.ext] [-l Longley-Rice_profile.ext] [-o
topographic_map_filename.ppm] [-b cartographic_boundary_filename.dat]
[-s site/city_database.dat] [-d sdf_directory_path] [-m earth radius
multiplier (float)] [-f frequency (MHz) for Fresnel zone calculations
(float)] [-R maximum coverage radius (miles/kilometers) (float)] [-dB
threshold beyond which contours will not be displayed] [-gc ground
clutter height (feet/meters) (float)] [-fz Fresnel zone clearance per‐
centage (default = 60)] [-ano alphanumeric output file name] [-ani
alphanumeric input file name] [-udt user_defined_terrain_file.dat] [-n]
[-N] [-nf] [-dbm] [-ngs] [-geo] [-kml] [-gpsav] [-metric]

DESCRIPTION
SPLAT! is a powerful terrestrial RF propagation and terrain analysis
tool for the spectrum between 20 MHz and 20 GHz. SPLAT! is free soft‐
ware, and is designed for operation on Unix and Linux-based worksta‐
tions. Redistribution and/or modification is permitted under the terms
of the GNU General Public License, Version 2, as published by the Free
Software Foundation. Adoption of SPLAT! source code in proprietary or
closed-source applications is a violation of this license and is
strictly forbidden.

SPLAT! is distributed in the hope that it will be useful, but WITHOUT

ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.

INTRODUCTION
Applications of SPLAT! include the visualization, design, and link bud‐
get analysis of wireless Wide Area Networks (WANs), commercial and ama‐
teur radio communication systems above 20 MHz, microwave links, fre‐
quency coordination and interference studies, and the prediction of
analog and digital terrestrial radio and television contour regions.

SPLAT! provides RF site engineering data such as great circle distances

and bearings between sites, antenna elevation angles (uptilt), depres‐
sion angles (downtilt), antenna height above mean sea level, antenna
height above average terrain, bearings, distances, and elevations to
known obstructions, Longley-Rice path attenuation, and received signal
strength. In addition, the minimum antenna height requirements needed
to clear terrain, the first Fresnel zone, and any user-definable per‐
centage of the first Fresnel zone are also provided.

SPLAT! produces reports, graphs, and high resolution topographic maps

that depict line-of-sight paths, and regional path loss and signal
strength contours through which expected coverage areas of transmitters
and repeater systems can be obtained. When performing line-of-sight
and Longley-Rice analyses in situations where multiple transmitter or
repeater sites are employed, SPLAT! determines individual and mutual
areas of coverage within the network specified.

INPUT FILES
SPLAT! is a command-line driven application and reads input data
through a number of data files. Some files are mandatory for success‐
ful execution of the program, while others are optional. Mandatory
files include digital elevation topography models in the form of SPLAT
File: /home/djordje/spl.txt Page 2 of 19

Data Files (SDF files), site location files (QTH files), and Longley-
Rice model parameter files (LRP files). Optional files include city
location files, cartographic boundary files, user-defined terrain
files, path loss input files, antenna radiation pattern files, and
color definition files.

SPLAT DATA FILES

SPLAT! imports topographic data in the form of SPLAT Data Files (SDFs).
These files may be generated from a number of information sources. In
the United States, SPLAT Data Files can be generated through U.S. Geo‐
logical Survey Digital Elevation Models (DEMs) using the postdownload
and usgs2sdf utilities included with SPLAT!. USGS Digital Elevation
Models compatible with these utilities may be downloaded from:
http://edcftp.cr.usgs.gov/pub/data/DEM/250/.

Significantly better resolution and accuracy can be obtained through

the use of SRTM Version 2 digital elevation models, especially when
supplemented by USGS-derived SDF data. These one-degree by one-degree
models are the product of the Space Shuttle STS-99 Radar Topography
Mission, and are available for most populated regions of the Earth.
SPLAT Data Files may be generated from 3 arc-second SRTM-3 data using
the included srtm2sdf utility. SRTM-3 Version 2 data may be obtained
through anonymous FTP from: ftp://e0srp01u.ecs.nasa.gov:21/srtm/ver‐
sion2/SRTM3/

Note that SRTM filenames refer to the latitude and longitude of the
southwest corner of the topographic dataset contained within the file.
Therefore, the region of interest must lie north and east of the lati‐
tude and longitude provided in the SRTM filename.

The srtm2sdf utility may also be used to convert 3-arc second SRTM data
in Band Interleaved by Line (.BIL) format for use with SPLAT!. This
data is available via the web at: http://seamless.usgs.gov/web‐
site/seamless/

Band Interleaved by Line data must be downloaded in a very specific

manner to be compatible with srtm2sdf and SPLAT!. Please consult
srtm2sdf's documentation for instructions on downloading .BIL topo‐
graphic data through the USGS's Seamless Web Site.

Even greater resolution and accuracy can be obtained by using 1 arc-

second SRTM-1 Version 2 topography data. This data is available for
the United States and its territories and possessions, and may be down‐
loaded from: ftp://e0srp01u.ecs.nasa.gov:21/srtm/version2/SRTM1/

High resolution SDF files for use with SPLAT! HD may be generated from
data in this format using the srtm2sdf-hd utility.

Despite the higher accuracy that SRTM data has to offer, some voids in
the data sets exist. When voids are detected, the srtm2sdf and
srtm2sdf-hd utilities replace them with corresponding data found in
usgs2sdf generated SDF files. If USGS-derived SDF data is not avail‐
able, voids are handled through adjacent pixel averaging, or direct
replacement.

SPLAT Data Files contain integer value topographic elevations in meters

referenced to mean sea level for 1-degree by 1-degree regions of the
Earth. SDF files can be read by SPLAT! in either standard format
(.sdf) as generated directly by the usgs2sdf, srtm2sdf, and srtm2sdf-hd
utilities, or in bzip2 compressed format (.sdf.bz2). Since uncom‐
pressed files can be read slightly faster than files that have been
compressed, SPLAT! searches for needed SDF data in uncompressed format
first. If uncompressed data cannot be located, SPLAT! then searches
for data in bzip2 compressed format. If no compressed SDF files can be
found for the region requested, SPLAT! assumes the region is over
water, and will assign an elevation of sea-level to these areas.
File: /home/djordje/spl.txt Page 3 of 19

This feature of SPLAT! makes it possible to perform path analysis not

only over land, but also between coastal areas not represented by Digi‐
tal Elevation Model data. However, this behavior of SPLAT! under‐
scores the importance of having all the SDF files required for the
region being analyzed if meaningful results are to be expected.

SITE LOCATION (QTH) FILES

SPLAT! imports site location information of transmitter and receiver
sites analyzed by the program from ASCII files having a .qth extension.
QTH files contain the site's name, the site's latitude (positive if
North of the equator, negative if South), the site's longitude (in
degrees West, 0 to 360 degrees, or degrees East 0 to -360 degrees), and
the site's antenna height above ground level (AGL), each separated by a
single line-feed character. The antenna height is assumed to be speci‐
fied in feet unless followed by the letter m or the word meters in
either upper or lower case. Latitude and longitude information may be
expressed in either decimal format (74.6864) or degree, minute, second
(DMS) format (74 41 11.0).

For example, a site location file describing television station WNJT-

DT, Trenton, NJ (wnjt-dt.qth) might read as follows:

WNJT-DT
40.2828
74.6864
990.00

Each transmitter and receiver site analyzed by SPLAT! must be repre‐

sented by its own site location (QTH) file.

LONGLEY-RICE PARAMETER (LRP) FILES

Longley-Rice parameter data files are required for SPLAT! to determine
RF path loss, field strength, or received signal power level in either
point-to-point or area prediction mode. Longley-Rice model parameter
data is read from files having the same base name as the transmitter
site QTH file, but with a .lrp extension. SPLAT! LRP files share the
following format (wnjt-dt.lrp):

15.000 ; Earth Dielectric Constant (Relative permittivity)

0.005 ; Earth Conductivity (Siemens per meter)
301.000 ; Atmospheric Bending Constant (N-units)
647.000 ; Frequency in MHz (20 MHz to 20 GHz)
5 ; Radio Climate (5 = Continental Temperate)
0 ; Polarization (0 = Horizontal, 1 = Vertical)
0.50 ; Fraction of situations (50% of locations)
0.90 ; Fraction of time (90% of the time)
46000.0 ; ERP in Watts (optional)

If an LRP file corresponding to the tx_site QTH file cannot be found,

SPLAT! scans the current working directory for the file "splat.lrp".
If this file cannot be found, then default parameters will be assigned
by SPLAT! and a corresponding "splat.lrp" file containing these default
parameters will be written to the current working directory. The gen‐
erated "splat.lrp" file can then be edited by the user as needed.

Typical Earth dielectric constants and conductivity values are as fol‐

lows:
Dielectric Constant Conductivity
Salt water : 80 5.000
Good ground : 25 0.020
Fresh water : 80 0.010
Marshy land : 12 0.007
Farmland, forest : 15 0.005
Average ground : 15 0.005
Mountain, sand : 13 0.002
City : 5 0.001
Poor ground : 4 0.001
File: /home/djordje/spl.txt Page 4 of 19

Radio climate codes used by SPLAT! are as follows:

1: Equatorial (Congo)
2: Continental Subtropical (Sudan)
3: Maritime Subtropical (West coast of Africa)
4: Desert (Sahara)
5: Continental Temperate
6: Maritime Temperate, over land (UK and west coasts of US &
EU)
7: Maritime Temperate, over sea

The Continental Temperate climate is common to large land masses in the

temperate zone, such as the United States. For paths shorter than 100
km, there is little difference between Continental and Maritime Temper‐
ate climates.

The seventh and eighth parameters in the .lrp file correspond to the
statistical analysis provided by the Longley-Rice model. In this exam‐
ple, SPLAT! will return the maximum path loss occurring 50% of the time
(fraction of time) in 90% of situations (fraction of situations). This
is often denoted as F(50,90) in Longley-Rice studies. In the United
States, an F(50,90) criteria is typically used for digital television
(8-level VSB modulation), while F(50,50) is used for analog (VSB-
AM+NTSC) broadcasts.

For further information on these parameters, see: http://flat‐

top.its.bldrdoc.gov/itm.html and http://www.softwright.com/faq/engi‐
neering/prop_longley_rice.html

The final parameter in the .lrp file corresponds to the transmitter's

effective radiated power, and is optional. If it is included in the
.lrp file, then SPLAT! will compute received signal strength levels and
field strength level contours when performing Longley-Rice studies. If
the parameter is omitted, path loss is computed instead. The ERP pro‐
vided in the .lrp file can be overridden by using SPLAT!'s -erp com‐
mand-line switch. If the .lrp file contains an ERP parameter and the
generation of path loss rather than field strength contours is desired,
the ERP can be assigned to zero using the -erp switch without having to
edit the .lrp file to accomplish the same result.

CITY LOCATION FILES

The names and locations of cities, tower sites, or other points of
interest may be imported and plotted on topographic maps generated by
SPLAT!. SPLAT! imports the names of cities and locations from ASCII
files containing the location of interest's name, latitude, and longi‐
tude. Each field is separated by a comma. Each record is separated by
a single line feed character. As was the case with the .qth files,
latitude and longitude information may be entered in either decimal or
degree, minute, second (DMS) format.

For example (cities.dat):

Teaneck, 40.891973, 74.014506

Tenafly, 40.919212, 73.955892
Teterboro, 40.859511, 74.058908
Tinton Falls, 40.279966, 74.093924
Toms River, 39.977777, 74.183580
Totowa, 40.906160, 74.223310
Trenton, 40.219922, 74.754665

A total of five separate city data files may be imported at a time, and
there is no limit to the size of these files. SPLAT! reads city data
on a "first come/first served" basis, and plots only those locations
whose annotations do not conflict with annotations of locations read
earlier in the current city data file, or in previous files. This
behavior minimizes clutter in SPLAT! generated topographic maps, but
File: /home/djordje/spl.txt Page 5 of 19

also mandates that important locations be placed toward the beginning

of the first city data file, and locations less important be positioned
further down the list or in subsequent data files.

City data files may be generated manually using any text editor,
imported from other sources, or derived from data available from the
U.S. Census Bureau using the citydecoder utility included with SPLAT!.
Such data is available free of charge via the Internet at:
http://www.census.gov/geo/www/cob/bdy_files.html, and must be in ASCII
format.

CARTOGRAPHIC BOUNDARY DATA FILES

Cartographic boundary data may also be imported to plot the boundaries
of cities, counties, or states on topographic maps generated by SPLAT!.
Such data must be of the form of ARC/INFO Ungenerate (ASCII Format)
Metadata Cartographic Boundary Files, and are available from the U.S.
Census Bureau via the Internet at: http://www.cen‐
sus.gov/geo/www/cob/co2000.html#ascii and http://www.cen‐
sus.gov/geo/www/cob/pl2000.html#ascii. A total of five separate carto‐
graphic boundary files may be imported at a time. It is not necessary
to import state boundaries if county boundaries have already been
imported.

PROGRAM OPERATION
SPLAT! is invoked via the command-line using a series of switches and
arguments. Since SPLAT! is a CPU and memory intensive application,
this type of interface minimizes overhead and lends itself well to
scripted (batch) operations. SPLAT!'s CPU and memory scheduling prior‐
ity may be modified through the use of the Unix nice command.

The number and type of switches passed to SPLAT! determine its mode of
operation and method of output data generation. Nearly all of SPLAT!'s
switches may be cascaded in any order on the command line when invoking
the program.

Simply typing splat on the command line will return a summary of

SPLAT!'s command line options:

--==[ SPLAT! v1.3.0 Available Options... ]==--

-t txsite(s).qth (max of 4 with -c, max of 30 with -L)

-r rxsite.qth
-c plot coverage of TX(s) with an RX antenna at X feet/meters AGL
-L plot path loss map of TX based on an RX at X feet/meters AGL
-s filename(s) of city/site file(s) to import (5 max)
-b filename(s) of cartographic boundary file(s) to import (5 max)
-p filename of terrain profile graph to plot
-e filename of terrain elevation graph to plot
-h filename of terrain height graph to plot
-H filename of normalized terrain height graph to plot
-l filename of path loss graph to plot
-o filename of topographic map to generate (.ppm)
-u filename of user-defined terrain file to import
-d sdf file directory path (overrides path in ~/.splat_path file)
-m earth radius multiplier
-n do not plot LOS paths in .ppm maps
-N do not produce unnecessary site or obstruction reports
-f frequency for Fresnel zone calculation (MHz)
-R modify default range for -c or -L (miles/kilometers)
-db threshold beyond which contours will not be displayed
-nf do not plot Fresnel zones in height plots
-fz Fresnel zone clearance percentage (default = 60)
-gc ground clutter height (feet/meters)
-ngs display greyscale topography as white in .ppm files
-erp override ERP in .lrp file (Watts)
-ano name of alphanumeric output file
-ani name of alphanumeric input file
File: /home/djordje/spl.txt Page 6 of 19

-udt filename of user defined terrain input file

-kml generate Google Earth (.kml) compatible output
-geo generate an Xastir .geo georeference file (with .ppm output)
-dbm plot signal power level contours rather than field strength
-gpsav preserve gnuplot temporary working files after SPLAT! execution
-metric employ metric rather than imperial units for all user I/O

The command-line options for splat and splat-hd are identical.

SPLAT! operates in two distinct modes: point-to-point mode, and area

prediction mode. Either a line-of-sight (LOS) or Longley-Rice Irregu‐
lar Terrain (ITM) propagation model may be invoked by the user. True
Earth, four-thirds Earth, or any other user-defined Earth radius may be
specified when performing line-of-sight analysis.

POINT-TO-POINT ANALYSIS
SPLAT! may be used to perform line-of-sight terrain analysis between
two specified site locations. For example:

splat -t tx_site.qth -r rx_site.qth

invokes a line-of-sight terrain analysis between the transmitter speci‐

fied in tx_site.qth and receiver specified in rx_site.qth using a True
Earth radius model, and writes a SPLAT! Path Analysis Report to the
current working directory. The report contains details of the trans‐
mitter and receiver sites, and identifies the location of any obstruc‐
tions detected along the line-of-sight path. If an obstruction can be
cleared by raising the receive antenna to a greater altitude, SPLAT!
will indicate the minimum antenna height required for a line-of-sight
path to exist between the transmitter and receiver locations specified.
Note that imperial units (miles, feet) are specified unless the -metric
switch is added to SPLAT!'s command line options:

splat -t tx_site.qth -r rx_site.qth -metric

If the antenna must be raised a significant amount, this determination

may take a few moments. Note that the results provided are the minimum
necessary for a line-of-sight path to exist, and in the case of this
simple example, do not take Fresnel zone clearance requirements into
consideration.

qth extensions are assumed by SPLAT! for QTH files, and are optional
when specifying -t and -r arguments on the command-line. SPLAT! auto‐
matically reads all SPLAT Data Files necessary to conduct the terrain
analysis between the sites specified. SPLAT! searches for the
required SDF files in the current working directory first. If the
needed files are not found, SPLAT! then searches in the path specified
by the -d command-line switch:

splat -t tx_site -r rx_site -d /cdrom/sdf/

An external directory path may be specified by placing a ".splat_path"

file under the user's home directory. This file must contain the full
directory path of last resort to all the SDF files. The path in the
$HOME/.splat_path file must be of the form of a single line of ASCII
text:

/opt/splat/sdf/

and can be generated using any text editor.

A graph of the terrain profile between the receiver and transmitter

locations as a function of distance from the receiver can be generated
by adding the -p switch:

splat -t tx_site -r rx_site -p terrain_profile.png

File: /home/djordje/spl.txt Page 7 of 19

SPLAT! invokes gnuplot when generating graphs. The filename extension

specified to SPLAT! determines the format of the graph produced. .png
will produce a 640x480 color PNG graphic file, while .ps or .postscript
will produce postscript output. Output in formats such as GIF, Adobe
Illustrator, AutoCAD dxf, LaTeX, and many others are available. Please
consult gnuplot, and gnuplot's documentation for details on all the
supported output formats.

A graph of elevations subtended by the terrain between the receiver and

transmitter as a function of distance from the receiver can be gener‐
ated by using the -e switch:

splat -t tx_site -r rx_site -e elevation_profile.png

The graph produced using this switch illustrates the elevation and
depression angles resulting from the terrain between the receiver's
location and the transmitter site from the perspective of the
receiver's location. A second trace is plotted between the left side
of the graph (receiver's location) and the location of the transmitting
antenna on the right. This trace illustrates the elevation angle
required for a line-of-sight path to exist between the receiver and
transmitter locations. If the trace intersects the elevation profile
at any point on the graph, then this is an indication that a line-of-
sight path does not exist under the conditions given, and the obstruc‐
tions can be clearly identified on the graph at the point(s) of inter‐
section.

A graph illustrating terrain height referenced to a line-of-sight path

between the transmitter and receiver may be generated using the -h
switch:

splat -t tx_site -r rx_site -h height_profile.png

A terrain height plot normalized to the transmitter and receiver

antenna heights can be obtained using the -H switch:

splat -t tx_site -r rx_site -H normalized_height_profile.png

A contour of the Earth's curvature is also plotted in this mode.

The first Fresnel Zone, and 60% of the first Fresnel Zone can be added
to height profile graphs by adding the -f switch, and specifying a fre‐
quency (in MHz) at which the Fresnel Zone should be modeled:

splat -t tx_site -r rx_site -f 439.250 -H normalized_height_profile.png

Fresnel Zone clearances other 60% can be specified using the -fz switch
as follows:

splat -t tx_site -r rx_site -f 439.250 -fz 75 -H height_profile2.png

A graph showing Longley-Rice path loss may be plotted using the -l

switch:

splat -t tx_site -r rx_site -l path_loss_profile.png

As before, adding the -metric switch forces the graphs to be plotted

using metric units of measure. The -gpsav switch instructs SPLAT! to
preserve (rather than delete) the gnuplot working files generated dur‐
ing SPLAT! execution, allowing the user to edit these files and re-run
gnuplot if desired.

When performing a point-to-point analysis, a SPLAT! Path Analysis

Report is generated in the form of a text file with a .txt filename
extension. The report contains bearings and distances between the
transmitter and receiver, as well as the free-space and Longley-Rice
path loss for the path being analyzed. The mode of propagation for the
File: /home/djordje/spl.txt Page 8 of 19

path is given as Line-of-Sight, Single Horizon, Double Horizon, Dif‐

fraction Dominant, or Troposcatter Dominant.

Distances and locations to known obstructions along the path between

transmitter and receiver are also provided. If the transmitter's
effective radiated power is specified in the transmitter's correspond‐
ing .lrp file, then predicted signal strength and antenna voltage at
the receiving location is also provided in the Path Analysis Report.

To determine the signal-to-noise (SNR) ratio at remote location where

random Johnson (thermal) noise is the primary limiting factor in recep‐
tion:

SNR = T - NJ - L + G - NF

where T is the ERP of the transmitter in dBW in the direction of the

receiver, NJ is Johnson Noise in dBW (-136 dBW for a 6 MHz television
channel), L is the path loss provided by SPLAT! in dB (as a positive
number), G is the receive antenna gain in dB over isotropic, and NF is
the receiver noise figure in dB.

T may be computed as follows:

T = TI + GT

where TI is actual amount of RF power delivered to the transmitting

antenna in dBW, GT is the transmitting antenna gain (over isotropic) in
the direction of the receiver (or the horizon if the receiver is over
the horizon).

To compute how much more signal is available over the minimum to neces‐
sary to achieve a specific signal-to-noise ratio:

Signal_Margin = SNR - S

where S is the minimum required SNR ratio (15.5 dB for ATSC (8-level
VSB) DTV, 42 dB for analog NTSC television).

A topographic map may be generated by SPLAT! to visualize the path

between the transmitter and receiver sites from yet another perspec‐
tive. Topographic maps generated by SPLAT! display elevations using a
logarithmic grayscale, with higher elevations represented through
brighter shades of gray. The dynamic range of the image is scaled
between the highest and lowest elevations present in the map. The only
exception to this is sea-level, which is represented using the color
blue.

Topographic output is invoked using the -o switch:

splat -t tx_site -r rx_site -o topo_map.ppm

The .ppm extension on the output filename is assumed by SPLAT!, and is

optional.

In this example, topo_map.ppm will illustrate the locations of the

transmitter and receiver sites specified. In addition, the great cir‐
cle path between the two sites will be drawn over locations for which
an unobstructed path exists to the transmitter at a receiving antenna
height equal to that of the receiver site (specified in rx_site.qth).

It may desirable to populate the topographic map with names and loca‐
tions of cities, tower sites, or other important locations. A city
file may be passed to SPLAT! using the -s switch:

splat -t tx_site -r rx_site -s cities.dat -o topo_map

Up to five separate city files may be passed to SPLAT! at a time fol‐

File: /home/djordje/spl.txt Page 9 of 19

lowing the -s switch.

County and state boundaries may be added to the map by specifying up to

five U.S. Census Bureau cartographic boundary files using the -b
switch:

splat -t tx_site -r rx_site -b co34_d00.dat -o topo_map

In situations where multiple transmitter sites are in use, as many as

four site locations may be passed to SPLAT! at a time for analysis:

splat -t tx_site1 tx_site2 tx_site3 tx_site4 -r rx_site -p profile.png

In this example, four separate terrain profiles and obstruction reports

will be generated by SPLAT!. A single topographic map can be specified
using the -o switch, and line-of-sight paths between each transmitter
and the receiver site indicated will be produced on the map, each in
its own color. The path between the first transmitter specified to the
receiver will be in green, the path between the second transmitter and
the receiver will be in cyan, the path between the third transmitter
and the receiver will be in violet, and the path between the fourth
transmitter and the receiver will be in sienna.

SPLAT! generated topographic maps are 24-bit TrueColor Portable PixMap

(PPM) images. They may be viewed, edited, or converted to other
graphic formats by popular image viewing applications such as xv, The
GIMP, ImageMagick, and XPaint. PNG format is highly recommended for
lossless compressed storage of SPLAT! generated topographic output
files. ImageMagick's command-line utility easily converts SPLAT!'s PPM
files to PNG format:

convert splat_map.ppm splat_map.png

Another excellent PPM to PNG command-line utility is available at:

http://www.libpng.org/pub/png/book/sources.html. As a last resort, PPM
files may be compressed using the bzip2 utility, and read directly by
The GIMP in this format.

The -ngs option assigns all terrain to the color white, and can be used
when it is desirable to generate a map that is devoid of terrain:

splat -t tx_site -r rx_site -b co34_d00.dat -ngs -o white_map

The resulting .ppm image file can be converted to .png format with a
transparent background using ImageMagick's convert utility:

convert -transparent "#FFFFFF" white_map.ppm transparent_map.png

REGIONAL COVERAGE ANALYSIS

SPLAT! can analyze a transmitter or repeater site, or network of sites,
and predict the regional coverage for each site specified. In this
mode, SPLAT! can generate a topographic map displaying the geometric
line-of-sight coverage area of the sites based on the location of each
site and the height of receive antenna wishing to communicate with the
site in question. A regional analysis may be performed by SPLAT! using
the -c switch as follows:

splat -t tx_site -c 30.0 -s cities.dat -b co34_d00.dat -o tx_coverage

In this example, SPLAT! generates a topographic map called tx_cover‐

age.ppm that illustrates the predicted line-of-sight regional coverage
of tx_site to receiving locations having antennas 30.0 feet above
ground level (AGL). If the -metric switch is used, the argument fol‐
lowing the -c switch is interpreted as being in meters rather than in
feet. The contents of cities.dat are plotted on the map, as are the
cartographic boundaries contained in the file co34_d00.dat.
File: /home/djordje/spl.txt Page 10 of 19

When plotting line-of-sight paths and areas of regional coverage,

SPLAT! by default does not account for the effects of atmospheric bend‐
ing. However, this behavior may be modified by using the Earth radius
multiplier (-m) switch:

splat -t wnjt-dt -c 30.0 -m 1.333 -s cities.dat -b counties.dat -o

map.ppm

An earth radius multiplier of 1.333 instructs SPLAT! to use the "four-

thirds earth" model for line-of-sight propagation analysis. Any appro‐
priate earth radius multiplier may be selected by the user.

When performing a regional analysis, SPLAT! generates a site report for

each station analyzed. SPLAT! site reports contain details of the
site's geographic location, its height above mean sea level, the
antenna's height above mean sea level, the antenna's height above aver‐
age terrain, and the height of the average terrain calculated toward
the bearings of 0, 45, 90, 135, 180, 225, 270, and 315 degrees azimuth.

DETERMINING MULTIPLE REGIONS OF LOS COVERAGE

SPLAT! can also display line-of-sight coverage areas for as many as
four separate transmitter sites on a common topographic map. For exam‐
ple:

splat -t site1 site2 site3 site4 -c 10.0 -metric -o network.ppm

plots the regional line-of-sight coverage of site1, site2, site3, and

site4 based on a receive antenna located 10.0 meters above ground
level. A topographic map is then written to the file network.ppm. The
line-of-sight coverage area of the transmitters are plotted as follows
in the colors indicated (along with their corresponding RGB values in
decimal):

site1: Green (0,255,0)

site2: Cyan (0,255,255)
site3: Medium Violet (147,112,219)
site4: Sienna 1 (255,130,71)

site1 + site2: Yellow (255,255,0)

site1 + site3: Pink (255,192,203)
site1 + site4: Green Yellow (173,255,47)
site2 + site3: Orange (255,165,0)
site2 + site4: Dark Sea Green 1 (193,255,193)
site3 + site4: Dark Turquoise (0,206,209)

site1 + site2 + site3: Dark Green (0,100,0)

site1 + site2 + site4: Blanched Almond (255,235,205)
site1 + site3 + site4: Medium Spring Green (0,250,154)
site2 + site3 + site4: Tan (210,180,140)

site1 + site2 + site3 + site4: Gold2 (238,201,0)

If separate .qth files are generated, each representing a common site

location but a different antenna height, a single topographic map
illustrating the regional coverage from as many as four separate loca‐
tions on a single tower may be generated by SPLAT!.

PATH LOSS ANALYSIS

If the -c switch is replaced by a -L switch, a Longley-Rice path loss
map for a transmitter site may be generated:

splat -t wnjt -L 30.0 -s cities.dat -b co34_d00.dat -o path_loss_map

In this mode, SPLAT! generates a multi-color map illustrating expected

signal levels in areas surrounding the transmitter site. A legend at
the bottom of the map correlates each color with a specific path loss
range in decibels.
File: /home/djordje/spl.txt Page 11 of 19

The -db switch allows a threshold to be set beyond which contours will
not be plotted on the map. For example, if a path loss beyond -140 dB
is irrelevant to the survey being conducted, SPLAT!'s path loss plot
can be constrained to the region bounded by the 140 dB attenuation con‐
tour as follows:

splat -t wnjt-dt -L 30.0 -s cities.dat -b co34_d00.dat -db 140 -o

plot.ppm

The path loss contour threshold may be expressed as either a positive

or negative quantity.

The path loss analysis range may be modified to a user-specific dis‐

tance using the -R switch. The argument must be given in miles (or
kilometers if the -metric switch is used). If a range wider than the
generated topographic map is specified, SPLAT! will perform Longley-
Rice path loss calculations between all four corners of the area pre‐
diction map.

The colors used to illustrate contour regions in SPLAT! generated cov‐

erage maps may be tailored by the user by creating or modifying
SPLAT!'s color definition files. SPLAT! color definition files have
the same base name as the transmitter's .qth file, but carry .lcf,
.scf, and .dcf extensions. If the necessary file does not exist in the
current working when SPLAT! is run, a file containing default color
definition parameters that is suitable for manual editing by the user
is written into the current directory.

When a regional Longley-Rice analysis is performed and the transmit‐

ter's ERP is not specified or is zero, a .lcf path loss color defini‐
tion file corresponding to the transmitter site (.qth) is read by
SPLAT! from the current working directory. If a .lcf file correspond‐
ing to the transmitter site is not found, then a default file suitable
for manual editing by the user is automatically generated by SPLAT!.

A path loss color definition file possesses the following structure

(wnjt-dt.lcf):

; SPLAT! Auto-generated Path-Loss Color Definition ("wnjt-dt.lcf")

File
;
; Format for the parameters held in this file is as follows:
;
; dB: red, green, blue
;
; ...where "dB" is the path loss (in dB) and
; "red", "green", and "blue" are the corresponding RGB color
; definitions ranging from 0 to 255 for the region specified.
;
; The following parameters may be edited and/or expanded
; for future runs of SPLAT! A total of 32 contour regions
; may be defined in this file.
;
;
80: 255, 0, 0
90: 255, 128, 0
100: 255, 165, 0
110: 255, 206, 0
120: 255, 255, 0
130: 184, 255, 0
140: 0, 255, 0
150: 0, 208, 0
160: 0, 196, 196
170: 0, 148, 255
180: 80, 80, 255
190: 0, 38, 255
File: /home/djordje/spl.txt Page 12 of 19

200: 142, 63, 255

210: 196, 54, 255
220: 255, 0, 255
230: 255, 194, 204

If the path loss is less than 80 dB, the color Red (RGB = 255, 0, 0) is
assigned to the region. If the path loss is greater than or equal to
80 dB, but less than 90 db, then Dark Orange (255, 128, 0) is assigned
to the region. Orange (255, 165, 0) is assigned to regions having a
path loss greater than or equal to 90 dB, but less than 100 dB, and so
on. Greyscale terrain is displayed beyond the 230 dB path loss con‐
tour.

FIELD STRENGTH ANALYSIS

If the transmitter's effective radiated power (ERP) is specified in the
transmitter's .lrp file, or expressed on the command-line using the
-erp switch, field strength contours referenced to decibels over one
microvolt per meter (dBuV/m) rather than path loss are produced:

splat -t wnjt-dt -L 30.0 -erp 46000 -db 30 -o plot.ppm

The -db switch can be used in this mode as before to limit the extent
to which field strength contours are plotted. When plotting field
strength contours, however, the argument given is interpreted as being
expressed in dBuV/m.

SPLAT! field strength color definition files share a very similar

structure to .lcf files used for plotting path loss:

; SPLAT! Auto-generated Signal Color Definition ("wnjt-dt.scf") File

;
; Format for the parameters held in this file is as follows:
;
; dBuV/m: red, green, blue
;
; ...where "dBuV/m" is the signal strength (in dBuV/m) and
; "red", "green", and "blue" are the corresponding RGB color
; definitions ranging from 0 to 255 for the region specified.
;
; The following parameters may be edited and/or expanded
; for future runs of SPLAT! A total of 32 contour regions
; may be defined in this file.
;
;
128: 255, 0, 0
118: 255, 165, 0
108: 255, 206, 0
98: 255, 255, 0
88: 184, 255, 0
78: 0, 255, 0
68: 0, 208, 0
58: 0, 196, 196
48: 0, 148, 255
38: 80, 80, 255
28: 0, 38, 255
18: 142, 63, 255
8: 140, 0, 128

If the signal strength is greater than or equal to 128 dB over 1 micro‐

volt per meter (dBuV/m), the color Red (255, 0, 0) is displayed for the
region. If the signal strength is greater than or equal to 118 dBuV/m,
but less than 128 dBuV/m, then the color Orange (255, 165, 0) is dis‐
played, and so on. Greyscale terrain is displayed for regions with
signal strengths less than 8 dBuV/m.

Signal strength contours for some common VHF and UHF broadcasting ser‐
vices in the United States are as follows:
File: /home/djordje/spl.txt Page 13 of 19

Analog Television Broadcasting

------------------------------
Channels 2-6: City Grade: >= 74 dBuV/m
Grade A: >= 68 dBuV/m
Grade B: >= 47 dBuV/m
--------------------------------------------
Channels 7-13: City Grade: >= 77 dBuV/m
Grade A: >= 71 dBuV/m
Grade B: >= 56 dBuV/m
--------------------------------------------
Channels 14-69: Indoor Grade: >= 94 dBuV/m
City Grade: >= 80 dBuV/m
Grade A: >= 74 dBuV/m
Grade B: >= 64 dBuV/m

Digital Television Broadcasting

-------------------------------
Channels 2-6: City Grade: >= 35 dBuV/m
Service Threshold: >= 28 dBuV/m
--------------------------------------------
Channels 7-13: City Grade: >= 43 dBuV/m
Service Threshold: >= 36 dBuV/m
--------------------------------------------
Channels 14-69: City Grade: >= 48 dBuV/m
Service Threshold: >= 41 dBuV/m

NOAA Weather Radio (162.400 - 162.550 MHz)

------------------------------------------
Reliable: >= 18 dBuV/m
Not reliable: < 18 dBuV/m
Unlikely to receive: < 0 dBuV/m

FM Radio Broadcasting (88.1 - 107.9 MHz)

----------------------------------------
Analog Service Contour: 60 dBuV/m
Digital Service Contour: 65 dBuV/m

RECEIVED POWER LEVEL ANALYSIS

If the transmitter's effective radiated power (ERP) is specified in the
transmitter's .lrp file, or expressed on the command-line using the
-erp switch, and the -dbm switch is invoked, received power level con‐
tours referenced to decibels over one milliwatt (dBm) are produced:

splat -t wnjt-dt -L 30.0 -erp 46000 -dbm -db -100 -o plot.ppm

The -db switch can be used to limit the extent to which received power
level contours are plotted. When plotting power level contours, the
argument given is interpreted as being expressed in dBm.

SPLAT! received power level color definition files share a very similar
structure to the color definition files described earlier, except that
the power levels in dBm may be either positive or negative, and are
limited to a range between +40 dBm and -200 dBm:

; SPLAT! Auto-generated DBM Signal Level Color Definition ("wnjt-

dt.dcf") File
;
; Format for the parameters held in this file is as follows:
;
; dBm: red, green, blue
;
; ...where "dBm" is the received signal power level between +40 dBm
File: /home/djordje/spl.txt Page 14 of 19

; and -200 dBm, and "red", "green", and "blue" are the corresponding
; RGB color definitions ranging from 0 to 255 for the region speci‐
fied.
;
; The following parameters may be edited and/or expanded
; for future runs of SPLAT! A total of 32 contour regions
; may be defined in this file.
;
;
+0: 255, 0, 0
-10: 255, 128, 0
-20: 255, 165, 0
-30: 255, 206, 0
-40: 255, 255, 0
-50: 184, 255, 0
-60: 0, 255, 0
-70: 0, 208, 0
-80: 0, 196, 196
-90: 0, 148, 255
-100: 80, 80, 255
-110: 0, 38, 255
-120: 142, 63, 255
-130: 196, 54, 255
-140: 255, 0, 255
-150: 255, 194, 204

ANTENNA RADIATION PATTERN PARAMETERS

Normalized field voltage patterns for a transmitting antenna's horizon‐
tal and vertical planes are imported automatically into SPLAT! when a
path loss, field strength, or received power level coverage analysis is
performed. Antenna pattern data is read from a pair of files having
the same base name as the transmitter and LRP files, but with .az and
.el extensions for azimuth and elevation pattern files, respectively.
Specifications regarding pattern rotation (if any) and mechanical beam
tilt and tilt direction (if any) are also contained within SPLAT!
antenna pattern files.

For example, the first few lines of a SPLAT! azimuth pattern file might
appear as follows (kvea.az):

183.0
0 0.8950590
1 0.8966406
2 0.8981447
3 0.8995795
4 0.9009535
5 0.9022749
6 0.9035517
7 0.9047923
8 0.9060051

The first line of the .az file specifies the amount of azimuthal pat‐
tern rotation (measured clockwise in degrees from True North) to be
applied by SPLAT! to the data contained in the .az file. This is fol‐
lowed by azimuth headings (0 to 360 degrees) and their associated nor‐
malized field patterns (0.000 to 1.000) separated by whitespace.

The structure of SPLAT! elevation pattern files is slightly different.

The first line of the .el file specifies the amount of mechanical beam
tilt applied to the antenna. Note that a downward tilt (below the
horizon) is expressed as a positive angle, while an upward tilt (above
the horizon) is expressed as a negative angle. This data is followed
by the azimuthal direction of the tilt, separated by whitespace.

The remainder of the file consists of elevation angles and their corre‐
sponding normalized voltage radiation pattern (0.000 to 1.000) values
File: /home/djordje/spl.txt Page 15 of 19

separated by whitespace. Elevation angles must be specified over a

-10.0 to +90.0 degree range. As was the convention with mechanical
beamtilt, negative elevation angles are used to represent elevations
above the horizon, while positive angles represents elevations below
the horizon.

For example, the first few lines a SPLAT! elevation pattern file might
appear as follows (kvea.el):

1.1 130.0
-10.0 0.172
-9.5 0.109
-9.0 0.115
-8.5 0.155
-8.0 0.157
-7.5 0.104
-7.0 0.029
-6.5 0.109
-6.0 0.185

In this example, the antenna is mechanically tilted downward 1.1

degrees towards an azimuth of 130.0 degrees.

For best results, the resolution of azimuth pattern data should be

specified to the nearest degree azimuth, and elevation pattern data
resolution should be specified to the nearest 0.01 degrees. If the
pattern data specified does not reach this level of resolution, SPLAT!
will interpolate the values provided to determine the data at the
required resolution, although this may result in a loss in accuracy.

EXPORTING AND IMPORTING REGIONAL CONTOUR DATA

Performing a regional coverage analysis based on a Longley-Rice path
analysis can be a very time consuming process, especially if the analy‐
sis is performed repeatedly to discover what effects changes to a
transmitter's antenna radiation pattern make to the predicted coverage
area.

This process can be expedited by exporting the contour data produced by

SPLAT! to an alphanumeric output (.ano) file. The data contained in
this file can then be modified to incorporate antenna pattern effects,
and imported back into SPLAT! to quickly produce a revised contour map.
Depending on the way in which SPLAT! is invoked, alphanumeric output
files can describe regional path loss, signal strength, or received
signal power levels.

For example, an alphanumeric output file containing path loss informa‐

tion can be generated by SPLAT! for a receive site 30 feet above ground
level over a 50 mile radius surrounding a transmitter site to a maximum
path loss of 140 dB (assuming ERP is not specified in the transmitter's
.lrp file) using the following syntax:

splat -t kvea -L 30.0 -R 50.0 -db 140 -ano pathloss.dat

If ERP is specified in the .lrp file or on the command line through the
-erp switch, the alphanumeric output file will instead contain pre‐
dicted field values in dBuV/m. If the -dBm command line switch is
used, then the alphanumeric output file will contain receive signal
power levels in dBm.

SPLAT! alphanumeric output files can exceed many hundreds of megabytes

in size. They contain information relating to the boundaries of the
region they describe followed by latitudes (degrees North), longitudes
(degrees West), azimuths (referenced to True North), elevations (to the
first obstruction), followed by either path loss (in dB), received
field strength (in dBuV/m), or received signal power level (in dBm)
without regard to the transmitting antenna's radiation pattern.
File: /home/djordje/spl.txt Page 16 of 19

The first few lines of a SPLAT! alphanumeric output file could take on
the following appearance (pathloss.dat):

119, 117 ; max_west, min_west

35, 34 ; max_north, min_north
34.2265424, 118.0631096, 48.199, -32.747, 67.70
34.2270358, 118.0624421, 48.199, -19.161, 73.72
34.2275292, 118.0617747, 48.199, -13.714, 77.24
34.2280226, 118.0611072, 48.199, -10.508, 79.74
34.2290094, 118.0597723, 48.199, -11.806, 83.26 *
34.2295028, 118.0591048, 48.199, -11.806, 135.47 *
34.2299962, 118.0584373, 48.199, -15.358, 137.06 *
34.2304896, 118.0577698, 48.199, -15.358, 149.87 *
34.2314763, 118.0564348, 48.199, -15.358, 154.16 *
34.2319697, 118.0557673, 48.199, -11.806, 153.42 *
34.2324631, 118.0550997, 48.199, -11.806, 137.63 *
34.2329564, 118.0544322, 48.199, -11.806, 139.23 *
34.2339432, 118.0530971, 48.199, -11.806, 139.75 *
34.2344365, 118.0524295, 48.199, -11.806, 151.01 *
34.2349299, 118.0517620, 48.199, -11.806, 147.71 *
34.2354232, 118.0510944, 48.199, -15.358, 159.49 *
34.2364099, 118.0497592, 48.199, -15.358, 151.67 *

Comments can be placed in the file if they are proceeded by a semicolon

character. The vim text editor has proven capable of editing files of
this size.

Note as was the case in the antenna pattern files, negative elevation
angles refer to upward tilt (above the horizon), while positive angles
refer to downward tilt (below the horizon). These angles refer to the
elevation to the receiving antenna at the height above ground level
specified using the -L switch if the path between transmitter and
receiver is unobstructed. If the path between the transmitter and
receiver is obstructed, an asterisk (*) is placed on the end of the
line, and the elevation angle returned by SPLAT! refers the elevation
angle to the first obstruction rather than the geographic location
specified on the line. This is done in response to the fact that the
Longley-Rice model considers the energy reaching a distant point over
an obstructed path to be the result of the energy scattered over the
top of the first obstruction along the path. Since energy cannot reach
the obstructed location directly, the actual elevation angle to the
destination over such a path becomes irrelevant.

When modifying SPLAT! path loss files to reflect antenna pattern data,
only the last numeric column should be amended to reflect the antenna's
normalized gain at the azimuth and elevation angles specified in the
file. Programs and scripts capable of performing this task are left as
an exercise for the user.

Modified alphanumeric output files can be imported back into SPLAT!

for generating revised coverage maps provided that the ERP and -dBm
options are used as they were when the alphanumeric output file was
originally generated:

splat -t kvea -ani pathloss.dat -s city.dat -b county.dat -o map.ppm

Note that alphanumeric output files generated by splat cannot be used

with splat-hd, or vice-versa due to the resolution incompatibility
between the two versions of the program. Also, each of the three types
of alphanumeric output files are incompatible with one another, so a
file containing path loss data cannot be imported into SPLAT! to pro‐
duce signal strength or received power level contours, etc.

USER-DEFINED TERRAIN INPUT FILES

A user-defined terrain file is a user-generated text file containing
latitudes, longitudes, and heights above ground level of specific ter‐
rain features believed to be of importance to the SPLAT! analysis being
File: /home/djordje/spl.txt Page 17 of 19

conducted, but noticeably absent from the SDF files being used. A
user-defined terrain file is imported into a SPLAT! analysis using the
-udt switch:

splat -t tx_site -r rx_site -udt udt_file.txt -o map.ppm

A user-defined terrain file has the following appearance and structure:

40.32180556, 74.1325, 100.0 meters

40.321805, 74.1315, 300.0
40.3218055, 74.1305, 100.0 meters

Terrain height is interpreted as being described in feet above ground

level unless followed by the word meters, and is added on top of the
terrain specified in the SDF data for the locations specified. Be
aware that each user-defined terrain feature specified will be inter‐
preted as being 3-arc seconds in both latitude and longitude in splat
and 1 arc-second in latitude and longitude in splat-hd. Features
described in the user-defined terrain file that overlap previously
defined features in the file are ignored by SPLAT! to avoid ambiguity.

GROUND CLUTTER
The height of ground clutter can be specified using the -gc switch:

splat -t wnjt-dt -r kd2bd -gc 30.0 -H wnjt-dt_path.png

The -gc switch as the effect of raising the overall terrain by the
specified amount in feet (or meters if the -metric switch is invoked),
except over areas at sea-level and at the transmitting and receiving
antenna locations. Note that the addition of ground clutter does not
necessarily modify the Longley-Rice path loss results unless the addi‐
tional clutter height results in a switch in the propagation mode from
a less obstructed path to a more obstructed path (from Line Of Sight to
Single Horizon Diffraction Dominant, for example). It does, however,
affect Fresnel zone clearances and line of sight determinations.

SIMPLE TOPOGRAPHIC MAP GENERATION

In certain situations it may be desirable to generate a topographic map
of a region without plotting coverage areas, line-of-sight paths, or
generating obstruction reports. There are several ways of doing this.
If one wishes to generate a topographic map illustrating the location
of a transmitter and receiver site along with a brief text report
describing the locations and distances between the sites, the -n switch
should be invoked as follows:

splat -t tx_site -r rx_site -n -o topo_map.ppm

If no text report is desired, then the -N switch is used:

splat -t tx_site -r rx_site -N -o topo_map.ppm

If a topographic map centered about a single site out to a minimum

specified radius is desired instead, a command similar to the following
can be used:

splat -t tx_site -R 50.0 -s NJ_Cities -b NJ_Counties -o topo_map.ppm

where -R specifies the minimum radius of the map in miles (or kilome‐
ters if the -metric switch is used). Note that the tx_site name and
location are not displayed in this example. If display of this infor‐
mation is desired, simply create a SPLAT! city file (-s option) and
append it to the list of command-line options illustrated above.

If the -o switch and output filename are omitted in these operations,

topographic output is written to a file named tx_site.ppm in the cur‐
rent working directory by default.
File: /home/djordje/spl.txt Page 18 of 19

GEOREFERENCE FILE GENERATION

Topographic, coverage (-c), and path loss contour (-L) maps generated
by SPLAT! may be imported into Xastir (X Amateur Station Tracking and
Information Reporting) software by generating a georeference file using
SPLAT!'s -geo switch:

splat -t kd2bd -R 50.0 -s NJ_Cities -b NJ_Counties -geo -o map.ppm

The georeference file generated will have the same base name as the -o
file specified, but have a .geo extension, and permit proper interpre‐
tation and display of SPLAT!'s .ppm graphics in Xastir software.

GOOGLE MAP KML FILE GENERATION

Keyhole Markup Language files compatible with Google Earth may be gen‐
erated by SPLAT! when performing point-to-point or regional coverage
analyses by invoking the -kml switch:

splat -t wnjt-dt -r kd2bd -kml

The KML file generated will have the same filename structure as a Path
Analysis Report for the transmitter and receiver site names given,
except it will carry a .kml extension.

Once loaded into Google Earth (File --> Open), the KML file will anno‐
tate the map display with the names of the transmitter and receiver
site locations. The viewpoint of the image will be from the position
of the transmitter site looking towards the location of the receiver.
The point-to-point path between the sites will be displayed as a white
line while the RF line-of-sight path will be displayed in green.
Google Earth's navigation tools allow the user to "fly" around the
path, identify landmarks, roads, and other featured content.

When performing regional coverage analysis, the .kml file generated by

SPLAT! will permit path loss or signal strength contours to be layered
on top of Google Earth's display in a semi-transparent manner. The
generated .kml file will have the same basename as that of the .ppm
file normally generated.

DETERMINATION OF ANTENNA HEIGHT ABOVE AVERAGE TERRAIN

SPLAT! determines antenna height above average terrain (HAAT) according
to the procedure defined by Federal Communications Commission Part
73.313(d). According to this definition, terrain elevations along
eight radials between 2 and 10 miles (3 and 16 kilometers) from the
site being analyzed are sampled and averaged for each 45 degrees of
azimuth starting with True North. If one or more radials lie entirely
over water or over land outside the United States (areas for which no
USGS topography data is available), then those radials are omitted from
the calculation of average terrain.

Note that SRTM-3 elevation data, unlike older USGS data, extends beyond
the borders of the United States. Therefore, HAAT results may not be
in full compliance with FCC Part 73.313(d) in areas along the borders
of the United States if the SDF files used by SPLAT! are SRTM-derived.

When performing point-to-point terrain analysis, SPLAT! determines the

antenna height above average terrain only if enough topographic data
has already been loaded by the program to perform the point-to-point
analysis. In most cases, this will be true, unless the site in ques‐
tion does not lie within 10 miles of the boundary of the topography
data in memory.

When performing area prediction analysis, enough topography data is

normally loaded by SPLAT! to perform average terrain calculations.
Under such conditions, SPLAT! will provide the antenna height above
average terrain as well as the average terrain above mean sea level for
azimuths of 0, 45, 90, 135, 180, 225, 270, and 315 degrees, and include
such information in the generated site report. If one or more of the
File: /home/djordje/spl.txt Page 19 of 19

eight radials surveyed fall over water, or over regions for which no
SDF data is available, SPLAT! reports No Terrain for the radial paths
affected.

ADDITIONAL INFORMATION
The latest news and information regarding SPLAT! software is available
through the official SPLAT! software web page located at:
http://www.qsl.net/kd2bd/splat.html.

AUTHORS
John A. Magliacane, KD2BD <[email protected]>
Creator, Lead Developer

Doug McDonald <[email protected]>

Original Longley-Rice Model integration

Ron Bentley <[email protected]>

Fresnel Zone plotting and clearance determination

KD2BD Software 15 November 2008 SPLAT!(1)