Scribd
Upload
292 views

Prequalified Welding Procedure Spesification (WPSS) : (Semiautomatics, Mechanized, Etc)

This 3 sentence summary provides the key details of the welding procedure specification document: 1) The document specifies the welding procedure for single V groove butt joints in steel plates between 3-10mm thick using shielded metal arc welding with E7016 and E7018 filler metals in all positions. 2) The welding parameters include a root opening of 2-3mm, stringer bead technique for the first pass and weave technique for subsequent passes, and current, voltage, and travel speed ranges for both electrode types. 3) Post weld heat treatment is not specified, and interpass cleaning will be done by grinding or brushing between all passes.

Uploaded by

Nuril VS theWorld
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
292 views

Prequalified Welding Procedure Spesification (WPSS) : (Semiautomatics, Mechanized, Etc)

This 3 sentence summary provides the key details of the welding procedure specification document: 1) The document specifies the welding procedure for single V groove butt joints in steel plates between 3-10mm thick using shielded metal arc welding with E7016 and E7018 filler metals in all positions. 2) The welding parameters include a root opening of 2-3mm, stringer bead technique for the first pass and weave technique for subsequent passes, and current, voltage, and travel speed ranges for both electrode types. 3) Post weld heat treatment is not specified, and interpass cleaning will be done by grinding or brushing between all passes.

Uploaded by

Nuril VS theWorld
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WPS/BLKPPDIY/2021/001

Rev.00

PREQUALIFIED WELDING PROCEDURE SPESIFICATION (WPSs)

BLKPP DIY WPS/BLKPPDIY/2021/001 00 8/2/2021


Company Name WPS No. Rev No. Date
Slamet Iman, S.Pd. 8/2/2021 No No
Authorize by Date Supporting PQR(s) CVN Report

BASE METALS Spesification Type or AWS Group BASE METAL As-Welded With PWHT
Grade No. THICKNESS
Base Material ASTM A36 _ I CJP Groove Welds 3-10mm _
Welded To ASTM A36 _ I CJP Groove w/CVN _ _
Backing Material _ _ _ PJP Groove Welds _ _
Other _ _ _ Fillet Welds _ _
DIAMETER _ _

JOINT DETAILS JOINT DETAILS (Sketch)


Groove Type Single V Groove Butt Joint
Groove Angle 60°-70°
Root Opening 2-3mm
Root Face 1-3mm
Backgouging _
Methode _

POST WELD HEAT TREATMENT


Temperature _
Time at Temperature _
Other _

PROCEDURE
Weld Layer(s) 1 2 to Unlimited
Weld Pass(es) 1 2 to Unlimited
Process SMAW SMAW
Type (Semiautomatics, Mechanized, etc) Manual Manual
Position All All
Vertical Progression _ _
Filler Metal (AWS Spec) A5.1 A5.1
AWS Classification E7016 E7018
Diameter 2.6 3.2
Manufacture/Trade Name _ _
Shielding Gas Composition _ _
Flow Rate _ _
Nozzle Size _ _
Preheat Temperature _ _
Interpass Temperature _ _
Electrical Characteristics _ _
Current Type and Polarity DCSP DCRP
Transfer Mode (GMAW) _ _
Power Source Type (cc, cv, etc) _ _
Amps / Current 50-70 60-90
Volts 20-30 20-30
Wire Feed Speed _ _
Travel Speed (mm/s) 2-5 2-5
Maxiumum Heat Input _ _
WPS/BLKPPDIY/2021/001
Rev.00

Technique
Stringer or Weave Stringer Weave
Multi or Single Pass (per side) Multipass Multipass
Oscillation (Mechanized/Automaic) None None
Number of Electrodes 1 1
Contact Tube to Work Dist. _ _
Peening None None
Interpass Cleaning Grinding or Grinding or
Brushing Brushing
Others _ _

Prepared by Approved by
Participant Welding Instructor

Mukhamad Ilham Rakhmadana Putra, S.Tr.T. Slamet Iman, S.Pd.

You might also like