1/2

• New & Renewable Energy

New
NEW & RENEWABLE
ENERGY TRAINER
• Conversion experiments on the produced energy(power production/processing)
ED-9720
• Characteristics of Solar Cell module’s voltage and current
• Alarm beep for wrong wire placement
• Voltmeter and ammeter as included for measuring AC and DC
• Control by PC and waveform and graph output
RENEWABLE
ENERGY
NEW &
PART2

> EXPERIMENTS
SOFTWARE
• Understanding of the solar cell energy
• Photo electricity simulation • LabVIEW Software
• Ohm’s Law and voltmeter/ammeter Data Monitoring DC Module
• Characteristics of solar cell(Isc, Voc) AC(Inverter) Module

• Light source’s intensity and shadow

> CONFIGURATION
• Basic Module
» Energy Production Module(in upper body)
› Solar Cell Panel
› Rheostat, Reflection Panel • Simulation Software
» Energy Processing Module(in lower body) » Photo electricity simulation followed by the voltage
› AC/DC Inverter impressed onto a metal plate
› Charge Controller » Photo electricity simulation followed by the types of a
› Battery metal plate
› AC/DC Tester » Photo electricity simulation followed by the light’s
» Communication Module wavelength
› Multi RS-485 Converter » Basic circuit configuration
› RS-485 Communication Board » Understanding of the current flow
• Integrated System(Option) » Simulation for the measured voltmeter/ammeter
» 300W Wind Generator Trainer(ED-9732) » Simulation by controlling voltage/current values
» Simulation followed by the changes in voltage, current
and resistance values

82 _ ED Co.,Ltd.
 2/2

_____

NEW & RENEWABLE

• Solar Cel(Energy Production Part) • AC Load

RENEWABLE
ENERGY
» Serial/parallel wiring » Fluorescent Lamp

NEW &
PART2
» Max. Operating Power : 5W › Operating Voltage : 220VAC
» Open Voltage : 20.5V › Rated Input Current : 0.09A
» Short Current : 0.3A › Lighting Frequency : 42KHz
» Operating Voltage : 17.64V » 220V Power Outlet
» Operating Current : 0.284A › Allowable Voltage : 220V/15A
» Dimmer Switch : 1KW • DC Load
» Halogen Lamp : 150W » DC Motor
• Charge Controller › Operating Voltage : 12V,
» System Voltage : 12V › Power Consumption : 0.63W
» Max. Charge Current : 10A/15A/20A › Speed : 6,100rpm
» Max. Load Current : 10A/15A/20A » DC Lamp
» Self Power Consumption : 6~9mA › Operating Voltage : 3~12VDC
» Charge Voltage(Float) : 13.8V • DC Voltage Meter, DC Ampere Meter
» Discharge Blocking Voltage : 11.4V » Voltage : 100~240VAC 50/60Hz
» Load Reconnecting Voltage : 12.4V » Power Consumption : 5VA
» Temperature Compensation : 20mV » Max. Indication Range : -1999~9999(4행)
• AC/DC Inverter » RS-485 Communication Output :
» Rated Continuous Output : 350W 1200/2400/4800/9600bps
» Max. Instant Output : 700W • Multi RS-485 Converter(ED-9710-73)
» Input Voltage : 10~15VDC » Processor : Atmega128, 8bit RISC
» Output Voltage : 220VAC » Memory : 128k Program Flash, 64k SRAM
» Low Voltage Alarm : 10.5V ±0.5V » Program Downloader : ISP
• Energy Storage Module » Interface : RS-485, RS-232, USB
» MF Battery » 485 Driver Chip : ADM1485
› Voltage : 12V » Power : 5V
› Capacity : 2.0AH • RS-485 Connector(ED-9710-71)
» Battery Charger » Communication Speed : 9600bps
› Rated Input Voltage : 220V/60Hz » Interface : RS-485
› Rated Input Current : 170mA » No. of Pin : 32pin x 2,
› Rated Output Voltage : 12VDC » High brightness Chip LED
› Rated Output Current : 1.6A » Operating Voltage : 3V
• Buzzer for Input Polarity » Color : Yellow, Red
» Operating Voltage : 5~12V
» Function : Alarm for wrong wire placement GENRAL CHARACTERISTICS
• AC Voltage Meter(2ea), AC Ampere Meter(2ea)
• Input Voltage : AC 220V 60Hz
» Voltage : 100~240VAC 50/60Hz
• System Dimension : 620(W) x 380(H) x 200(D)mm
» Power Consumption : 5VA
» Max. Indication Range : -1999~9999(4 lines)
» RA-485 Communication Output : ACCESSORIES
1200/2400/4800/9600bps • Cable(Power, Serial, Circuit Connection) : 1set
» Protocol : Modbus • User Manual : 1ea

www.ed.co.kr _ 83