Republic of the Philippines

Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8

TECHNICAL DRAFTING { Module 1}

Personal Entrepreneural Competencies
Name: ________________________________________ Score: _____________________
Grade/ Section________________________________ Date: ______________________

Test !- A. Matching Type Directions: Match Column A to Column B. Write only the letter on the space
provided.

Column A. Column B.

______1. Hardworking A. Ability to set realistic targets.

______2. Self-confident B. Interest in money generation.
______3. Profit-oriented C.To succeed, one must believe in one’s self.
______4. Goal-oriented D. Working diligently and industriously.
_______5. Persistent E. Being able to listen to the advice of others.
_______6. Responds or open to feedback F. Obtaining useful feedback and advice from others.
_______7. Willing to listen G. Being patient and strives to achieve the goal.
_______8. Committed H. Ability to take measured or calculated risks

_______9. Reliable and has integrity I. Being honest, fair and trustworthy.
_______ 10. Risk-taker J. A major priority in the entrepreneur’s life.

Test II -Multiple Choice Directions: Read and study the situation that describes the entrepreneurial
characteristics or attributes. Answer the question by writing the letter on the space provided.

_____1. What PECs must she possess if there are customers who complain about the quality of her
product?
a. Patience b. Hardworking c. Versatile d. All of the above
_____2. Which of the following is NOT considered as a characteristic of an entrepreneur?
a. Copes with failure b. Dependent c. Persistent d. Opportunity seeker

_____3. If she wants to ensure a profitable business operation, what characteristic will she maintain?
a. Commitment b. Goal oriented c. Futuristic d. Opportunity seeker

_____4. Mrs. Magno follows the advice of a friend to be flexible especially if she intends to open a retail
business. What PECs has been demonstrated by Mrs. Magno?
a. Self- confidence b. Reliable and has integrity c. Open to feedback d. Persistent

_____5. She tells Mary, her best friend that she has a strong will and does not give up to find a solution
to a business problem. What PECs has been demonstrated by Mrs. Magno?
a. Hard work b. Persistence c. Self-confidence d. Risk- taking

KEEP SAFE AND GOD BLESS YOU 

Prepared by : MYLIN E. LORENZO

TEACHER III
 Republic of the Philippines
Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8
TECHNICAL DRAFTING { Module 2}
Environment and Market
Name: ________________________________________ Score: _____________________
Grade/ Section________________________________ Date: ______________________
Test I - Multiple Choice: Read the statements carefully. Write only the letter that corresponds to your
answer.
____1. The following are examples of peoples’ basic needs, except:
a. Recreation b. Clothing c. Shelter d. Food

____2. Which of the following should be considered first by a prospective entrepreneur in choosing the
right location for his/her store?
a. Type of merchandise b. The access of the target customers
c. The attractiveness of the store layout d. The prevailing prices of goods in the area

_____3. Thong plans to put a “digi-print” studio in their locality. Which of the following will help him
determine his plan for a success setting up of his business?
a. Survey of consumer associations b. Checking for similar business to avoid competition
c. Getting feedback on the quality of service d. Conduct a SWOT analysis

____4. Ceasar studies the population in his immediate community. He is doing this to –
a. Identify his would be “suki”. b. Predict his biggest buyer
. c. Select his favourite costumers. d. Determine whom to sell his product or service.
____5. When an entrepreneur improves and alters products to make it more appealing to target
consumers, he/she is doing an _________ of the product.
a. alteration b. invention c. innovation d. improvisation
TEST II – TRUE OR FALSE Directions: Write T if the statement is true and F if it is false. Write your answer
on the space provided.

_____1.Be realistic about the strengths and weaknesses of your business when conducting SWOT
analysis.
_____2. SWOT analysis should distinguish between where your business is today, and where it could be
in the future.
____3. SWOT should always be specific. Avoid any grey areas
____4. Always apply SWOT in relation to your competition i.e. better than or worse than your
competition.
____5. Keep your SWOT short and simple. Avoid complexity and over analysis
____6. SWOT is subjective.
____7. SWOT should always be specific. Avoid any blue areas.
____8. Keep your SWOT long and extraordinary. Avoid complexity and over analysis
____9. SWOT is objective.
____10. .Be fantastic about the strengths and weaknesses of your business when conducting SWOT
analysis.
KEEP SAFE AND GOD BLESS YOU 

Prepared by : MYLIN E. LORENZO

TEACHER III
 Republic of the Philippines
Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8

TECHNICAL DRAFTING { Module 3}

Use of Tools and Equipment
Name: ________________________________________ Score: _____________________
Grade/ Section________________________________ Date: ______________________
Test I - Multiple Choice: Read the statements carefully. Write only the letter that corresponds to your
answer.

_____1. It is a tool used to draw vertical lines and more convenient when used with T-square.
A. Eraser B. Compass C. Erasing shield D. Triangle
_____2. It is to shield the remainder of the drawing whenever you are erasing smudges and/or
unwanted pencil lines.
A. Ruler B. Compass C. Erasing shield D. Drawing pencil
______3. A drafting material used to secure the drawing paper on the table or on a board.
A. Eraser B. T-square C. Ruler D. Masking tape
______4. This is a tool typically used in reproducing a drawing to enlarge or reduce its form to some
regular proportion.
A. Triangular scales B. T-square C. Ruler D. Masking tape
______5. It is a semi-circular instrument divided into 180-degree equal components.
A. T-square B. Protractor C. Compass D. Ruler

II. Matching Type Directions: Match column A with column B. Write ONLY the letter of your chosen
answer.
Column A Column B

1. A type of T-square where the top is adjustable and used just

for occasional drawing. A. Divider
2. This is a drawing instrument used to transfer measurements,
dividing lines and arcs into the specified range of equal components.
B. Detachable Head
3. It cleans the dirt off the drawing. C. Pencil sharpener
4. A type of T-square designed for comfort in carrying the drafting instrument. D. Eraser
5. Pencils ought to be sharpened whenever they show sign of dullness. E. Adjustable Head
F. Drawing pencil
Test III -Directions: Rearrange the letter to create a word that best describes each of the given
statements
Equipment Function/Description
T – SQUARE 1. Q T U S R A E - Drawing equipment used to draw horizontal lines. Additionally, it can
be used for guiding triangles in drawing vertical lines.
_____________2. E G A R T I N L A three-sided ruler that has usually two equal sides with a 90 degree
angle and its third side is at 30, 45, or 60 degree angle.
_____________3. M O P C A S S - Drawing arcs and circles is easier to draw when using this equipment.
_____________4. T R O O P C R A R T - It determines the gradations of the degrees in calculating arcs,
angles and circles
_____________5. R E D D I V I - Drawing equipment used to transfer measurements, dividing lines and
arcs into the specified range of equal components.

KEEP SAFE AND GOD BLESS YOU 

Prepared by : MYLIN E. LORENZO

TEACHER III
 Republic of the Philippines
Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8

TECHNICAL DRAFTING { Module 4}

Maintain Hand Tools, Drawing Instruments, Equipment and Paraphernalia
Name: ________________________________________ Score: _____________________
Grade/ Section________________________________ Date: ______________________

Test I - Multiple Choice: Read the statements carefully. Write only the letter that corresponds to your
answer.

_____1. Which of the following factors that contributes to the rapidly growing interest in maintenance
that leads to a more mechanized and automated equipment.
a. Environmental concern c. Increased fixed costs
b. Greater complication d. Technological development

_____2. Which of the following factors that contributes to the rapidly growing interest in maintenance
that concerns in the growing quantity of electronic wastes (monitors, laptops, cellular phones, other
electronic gadgets and its substances).
a. Environmental concern c. Increased fixed costs
b. Greater complication d.Technological development
_____ 3. Which of the following tool that needs to maintain a strong grasp, it’s Handle must be slip-free,
jaws have a strong grip and its blades well sharpened. To utilize this tool. A worker must firmly hold it by
its handle and make sure the not too much stress is applied to the wrist or the arm.
a. Cutting tool b. Gripping Tool c. Diagnostic Tool d. Driving Tool
____ 4. What you should applied to the tools after tightening to reduce the friction.
a. Alcohol b. Cleaning Agents c. disinfectants d. lubricants
_____5. ________ is one of the sure ways to keep a safe workplace.
a. Cleaning b. Good House Keeping c. Maintenance d. Safety

TEST II – TRUE OR FALSE Directions: Write T if the statement is true and F if it is false. Write your answer
on the space provided .
_______1. All tools and equipment must be properly maintained so that workers are not endangered.
_______2. Corrective maintenance is the systematic care and protection of tools, equipment and
machines in order to keep them in a safe, usable condition, limit downtime and extend productivity.
_______3. The degree of detail to include regarding tools and equipment maintenance will depend on
the kinds of tools/equipment used.
_______4. Damaged or defective equipment/tools should be tagged and removed from service.
_______5. Most manufacturers can’t provide maintenance schedules for their equipment.
_______6. Properly stored tools and equipment will be hard to find when needed and are less likely to
be lost
_______7. Use bins for storing small parts is a good practice on proper storage.
_______8. Productivity is increased because time is not lost looking for tools, parts and equipment is
one of the benefits of proper storage.
_______9. Damaged or defective equipment/tools should be tagged and removed from service.
_______10. Choosing the correct tools for a specific task will increase the chance of inflicting bodily
injuries.

KEEP SAFE AND GOD BLESS YOU 

Prepared by : MYLIN E. LORENZO

TEACHER III
 Republic of the Philippines
Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8

TECHNICAL DRAFTING { Module 1}

Personal Entrepreneural Competencies

ANSWER KEY
Test I – Matching Type
1. d
2. c
3. b
4. a
5. g
6. f
7. e
8. j
9. i
10. h
Test II – Multiple Choice
1. a
2. b
3. d
4. c
5. b
 Republic of the Philippines
Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8

TECHNICAL DRAFTING { Module 2}

Environment and Market

ANSWER KEY

Test I – Multiple Choice

1. a
2. b
3. d
4. c
5. b
Test II – True or False
1. T
2. T
3.T
4.T
5.T
6.T
7.F
8.F
9.F
10.F
 Republic of the Philippines
Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8

TECHNICAL DRAFTING { Module 3}

Use of Tools and Equipment

ANSWER KEY

Test I –– Multiple Choice

1. d
2. c
3. d
4. a
5. c

Test II – Matching Type

1. e
2. b
3. d
4. a
5. c

Test III – Jumbled letters

1. T- SQUARE
2. TRIANGLE
3. COMPASS
4. PROTRACTOR
5. DIVIDER
 Republic of the Philippines
Department of Education
Region III

School Division Of Bulacan

SAN ILDEFONSO NATIONAL HIGH SCHOOL

Poblacion, San Ildefonso, Bulacan

Fourth Quarter Summative Test

In
Technology and Livelihood Education 8

TECHNICAL DRAFTING { Module 4}

Maintain Hand Tools, Drawing Instruments, Equipment and Paraphernalia

ANSWER KEY
Test I –– Multiple Choice
1. d
2. a
3. b
4. d
5. b

Test II – True or False

1. T
2. F
3.T
4.T
5.F
6.F
7.T
8.T
9.T
10.T