Scribd
Upload
26 views37 pages

Conectores Diagnósticos

The document discusses connecting an EOBD2 diagnostic plug to vehicles. It provides details on the pinouts for the plug and shows images of lifting a cover and connecting the plug on a Scania truck to access the diagnostic port.

Uploaded by

Mauricio Navarro santana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views37 pages

Conectores Diagnósticos

The document discusses connecting an EOBD2 diagnostic plug to vehicles. It provides details on the pinouts for the plug and shows images of lifting a cover and connecting the plug on a Scania truck to access the diagnostic port.

Uploaded by

Mauricio Navarro santana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 37

PRESA DIAGNOSI SU AUTO EOBD2

PLUG EOBD2 CAR DIAGNOSE

PIN 2 - +J1850 BUS HIGH FORD GM


+J1708 BUS 485 HIGH RENAULT VOLVO TRUCK
PIN 4 - CHASSIS GROUND
PIN 5 - SIGNAL GROUND
PIN 6 - +CAN HIGH (J-2284)
PIN 7 - ISO 9141-2 K LINE
PIN 10 - -J1850 BUS LOW FORD GM
-J1708 BUS 485 LOW RENAULT VOLVO TRUCK
PIN 14 - -CAN LOW (J-2284)
PIN 15 - ISO 9141-2 L LINE
PIN 16 - BATTERY +12V

PRESA DIAGNOSI PLUG DIAGNOSE


SCANIA 12L 420 –470 HPI E3 - SPINA ROTONDA –ECU MSS6
Sollevare il coperchio mostrato in figura sottostante:
Lift the cover shown in underlying figure:

Vi troverete di fronte la seguente situazione:


You will be of front the following situation:

1/2
Seguire la seguente figura per connettere i cavi alla presa di diagnosi:
Follow the following figure for connecting the cable to the taking diagnosis:

________________________________________________________________________________

2/2

You might also like