Scribd
Upload
34 views

CS 202 Arithmetic Micro Operations

The document discusses arithmetic micro-operations performed on binary data in CPU registers. It describes basic operations like addition, subtraction, incrementing and decrementing. Tables and circuits are provided to illustrate 4-bit binary addition, subtraction, incrementing and decrementing using full adders and half adders.

Uploaded by

INFINITY GAmEr
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

CS 202 Arithmetic Micro Operations

The document discusses arithmetic micro-operations performed on binary data in CPU registers. It describes basic operations like addition, subtraction, incrementing and decrementing. Tables and circuits are provided to illustrate 4-bit binary addition, subtraction, incrementing and decrementing using full adders and half adders.

Uploaded by

INFINITY GAmEr
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Arithmetic Micro-Operations(CS-202)

BY:- BALDEV RAM MALI


LECTURER- COMPUTER SCIENCE & ENGINEERING,
GOVT. POLYTECHNIC COLLEGE, JODHPUR ( RAJ. )
Arithmetic Micro-Operations
• The Arithmetic Micro-operations are operations
which performed on binary data stored in the
CPU registers.
• The basic Arithmetic Micro-operations are
following:
➢ Addition
➢ Subtraction
➢ Increment
➢ Decrement
Arithmetic Micro-Operations Table

Symbolic Notation Description

R3 ← R1 + R2 The contents of R1 plus R2 are transferred to R3.

R3 ← R1 - R2 The contents of R1 minus R2 are transferred to R3.

R2 ← R2' Complement the contents of R2 (1's complement)


R2 ← R2' + 1 2's complement the contents of R2 (negate)

R3 ← R1 + R2' + 1 R1 plus the 2's complement of R2 (subtraction)

R1 ← R1 + 1 Increment the contents of R1 by one

R1 ← R1 - 1 Decrement the contents of R1 by one


4-bit Binary Adder
• The binary adder is constructed with full-
adder circuits connected in cascade, with the
output carry from one full-adder connected to
the input carry of the next full-adder.
• Figure- 1 shows the interconnections of four
full-adders (FA) to provide a 4-bit binary adder.
Figure-1 : 4-bit Binary Adder
4-bit Binary Adder-Subtractor
• The subtraction of binary numbers can be
done by means of 2’s complements that is
subtraction A – B can be done by taking the
2's complement of B and adding it to A.
• The addition and subtraction operations can
be combined into one common circuit by
including an exclusive-OR gate with each full-
adder.
• A 4-bit adder-subtractor circuit is shown in
Figure-2.
4-bit Binary Adder-Subtractor
• The mode input M controls the operation.
When M = 0 the circuit is an adder and when
M = 1 the circuit becomes a subtractor.
• Each exclusive-OR gate receives input M and
one of the inputs of B. When M = 0, we have B
X-OR 0 = B. The full-adders receive the value
of B, the input carry is O, and the circuit
performs A plus B .
• When M = 1, we have B X-OR 1 = B' and C0 =
1. The B inputs are all complemented and a 1
is added through the input carry. The circuit
performs the operation A plus the 2's
complement of B that is A-B is performed.
4-bit Binary Incrementor

• The increment micro-operation adds one to a


number in a register.
• The diagram of a 4-bit binary incrementer
circuit is shown in following figure. One of the
inputs to the least significant half-adder (HA)
is connected to logic-1 and the other input is
connected to the least significant bit of the
number to be incremented.
4-bit Binary Decrementor

• The decrement micro-operation subtract one


from a number in a register.
• For performing 4-bit binary decrement micro-
operation, we can use circuit of 4-bit Binary
Adder-Subtractor of Figure-2, with taking
given 4-bit number in register A , one in
register B and mode M=1.

You might also like