Scribd
Upload
80 views1 page

RMB.e and RCB.e Technical Data: Rating (A) 50 100 150 Input

The RMB.e and RCB.e are battery chargers that can charge lead-acid, lithium-ion, and nickel-cadmium batteries. They are available in ratings from 50 to 150 amps for single or three-phase power input. The chargers provide a static regulated output voltage and can charge batteries in various voltage configurations. Additional features include an LCD display, monitoring capabilities, and optional connectivity modules. Dimensions and weight vary depending on the output rating.

Uploaded by

Badian ew
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views1 page

RMB.e and RCB.e Technical Data: Rating (A) 50 100 150 Input

The RMB.e and RCB.e are battery chargers that can charge lead-acid, lithium-ion, and nickel-cadmium batteries. They are available in ratings from 50 to 150 amps for single or three-phase power input. The chargers provide a static regulated output voltage and can charge batteries in various voltage configurations. Additional features include an LCD display, monitoring capabilities, and optional connectivity modules. Dimensions and weight vary depending on the output rating.

Uploaded by

Badian ew
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

www.borri.

it

RMB.e and RCB.e technical data


Rating (A) 50* 100 150 (RCB.e only)
Input
Nominal voltage 230 Vac 1-phase (RMB.e) or 400 Vac 3-phase (RCB.e) ±10%
Frequency 50/60 Hz ±5 Hz
Output
Nominal voltage 24/48/110/Vdc,220 Vdc only for RCB.e
Operating voltage Floating: 2.27 (VRLA), 2.2÷2.3 (VLA), 1.4÷1.5 (Ni-Cd) V/cell adjustable
Boost: 2.4÷2.45 (VLA), 1.5÷1.65 (Ni-Cd) V/cell adjustable
Equalizing: up to 2.35 (VRLA), up to 2.7 (VLA), up to 1.7 (Ni-Cd) V/cell adjustable
Static voltage regulation ±1%
Voltage ripple ≤1%
Overload capacity <120% for 20 min; <150% for 2 min; >150% for 20 s
Charging characteristic IU (according to DIN 41773), I1I2U, U1U2I
System and environmental
Isolation Input/output
Dimensions WxHxD (mm) 550x1300x550
Weight (kg) Product weights vary with output rated current and voltage (see the table below)
Rating 50 100 150

RMBe RCB.e RMBe RCB.e RCB.e

Due to our policy of continuous development, data in this document is subject to change without notice and becomes contractual only after written confirmation
24 Vdc 80 90 90 100 110
Output voltage 48 Vdc 90 100 100 115 135
110 Vdc 100 115 110 145 175
220 Vdc - 150 - 180 240
Cooling Forced ventilation
Colour RAL 7035
Protection degree (IEC 60529) IP21 (option up to IP41)
Operating temperature -10 °C ÷ +40 °C
Storage temperature -20 °C ÷ +70 °C
Altitude <2000 m (derating according to EN 62040-3)
Audible noise at 1 meter (dBA) <65
Options Associated battery cabinets; matching cabinets for distribution and dropping cells;
built-in battery breaker; external battery breakers in standard or Eex-d
wall-mounted box; battery thermal probe; block diode for parallel;
earth fault alarm; fan monitoring and alarm; control logic redundant supply
User Interface
Front panel LCD display with 4x LED set, mimic and keyboard
Connectivity (optional) up to 2 SPDT contact relay cards, RS232 serial port, RS485 ModBus-RTU serial port,
ModBus to PROFIBUS DP adapter, Ethernet SNMP/WEB adapter,
remote monitoring software

*25A size available only for RMB.e (more details on request)

You might also like