Codeline Pressure Vessel model 80S100 www.lenntech.com info@lenntech.

com

Approx
DWG PART Dash L P S
QTY DESCRIPTION MATERIAL Weight
REF NUMBER Length IN(MM) IN(MM) IN(MM)
LB(KG)
SHELL
Filament Wound Epoxy/Glass 63.15 47 19X1 137
-1
1 1 SHELL composite - Head locking grooves (1604) (1194) (486) (62)
ORDER integrally wound in place.
103.15 87 56X1 170
2 A/R SECTION F/C Port CD3MWCuN * -2
(2620) (2210) (1422) (77)
3 A/R F/C Port Seal Ethylene Propylene
143.15 127 80X1 203
HEAD -3
(3636) (3226) (2032) (92)
6061-T6 Aluminium alloy - Hard
4 2 96158 Bearing Plate 236
anodized 183.15 167 64X2
-4
5 2 96160 Sealing Plate Engineering Thermoplastic. (4652) (4242) (1626) (107)
6 2 96162 Permeate Port Engineering Thermoplastic. 223.15 207 78X2 269
-5
7 2 45066 Port Nut Engineering Thermoplastic. (5668) (5258) (1981) (122)
8 2 96000 Head Seal Ethylene Propylene - O - Ring 263.15 247 92X2 303
-6
(6684) (6274) (2337) (137)
9 2 45312 Perm Port Seal Ethylene Propylene - O - Ring
303.15 287 106X2 336
HEAD INTERLOCK -7
(7700) (7290) (2692) (152)
10 2 47336 Quick Release Spiral Ring 316 Stainless Steel.
343.15 327 120X2 369
VESSEL SUPPORT -8
(8716) (8306) (3048) (167)
11 *2 52169 Saddle Engineering Thermoplastic.
12 *2 45042 Strap Assy. 304 Stainless Steel-PVC Cushion.

13 4 46265 Strap screw. 5/16-18 UNC, 18-8 Stainless Steel.

ELEMENT INTERFACE
14 2 A/R Adapter Engineering Thermoplastic.

15 2 52245 Adapter seal Ethylene Propylene - O - Ring

16 4 A/R PWT Seal Ethylene Propylene - O - Ring

17 1 96163 Thrust Cone Engineering Thermoplastic.

* 3 each furnished with length code 4,5,6,7 & 8.

 ORDERING:
RATING: PRECAUTIONS: Using the chart below, please check the features you require
DO…read, understand and follow all instructions; failure to
DESIGN PRESSURE……………….1000 PSIG at 150°F take every precaution will void warranty and may result in VESSEL LENGTH CODE – please check one
(6.9 MPa at 66°C) vessel failure MODEL 80S100
-1
-2
-3
-4
-5
-6
-7
-8
MIN. OPERATING TEMP…………...……………20°F DO…mount the shell on horizontal members at span “S”
(-7°C) using compliant vessel supports furnished; Shim saddles if MEMBRANE BRAND AND MODEL
FACTORY TEST PRESSURE…. … CE / ASME required. Tighten hold down straps just snug
 Please supply adapters for the following membrane brand and specific model
1500 PSIG / 1100 PSIG DO…align and center side ports with the manifold header.
Brand_________________________ Model_______________________
(10.34 MPa) (7.58 MPa) Correct, causes of misalignment in a row of vessels
QUALIFICATION PRESSURE ………..…....6000 PSI connected to the same header
CERTIFICATION REQUIRED
(41.37 MPa) DO…use flexible type grooved-end pipe couplings,
INTENDED USE: Victaulic® Style 77 or equal, at side ports; allow full,
ADAPTER KITS
 ASME Stamped and National Board Registered.
The CodeLine 80S100 Fiberglass RO Pressure Vessel is 0.125 inch gap between port and piping, and position  CE Marked Standard. UP DOWN
designed for continuous, long term use as housing for piping to maximize flexibility of connection.  Certified by Pentair water. STREAM STREAM
reverse osmosis membrane elements to desalt typical DO…provide flexibility in, and support for piping manifolds  In compliance with the ASME Sec X but not Code Stamped.
brackish waters at pressures up to 1000 psi. Any make of so that vessel can grow in length under pressure without  Hydro testing at 1.1 times the design pressure
eight-inch nominal diameter spiral-wound element is undue restraint; provide additional flexible joints in large  Hydro testing at 1.5 times the design pressure
easily accommodated; the appropriate interfacing pipes leading to manifold header.
hardware for the element specified is furnished with the DO…provide overpressure protection for vessel set at not PERMEATE PORT SELECTION
vessel. more than 105% of design pressure Serial Number End
DO…inspect end closures regularly; replace components that
The CodeLine 80S100 is designed in accordance with the have deteriorated and correct causes of corrosion Size of the Permeate Port
1”
1.25”
1.5”
engineering standards of the Boiler and Pressure Vessel DO… Lubricate seals sparingly, using nonpetroleum
Code of the American Society of Mechanical Engineers Based lubricants, i.e. Parker Super O-lube®, Type of Connection
FNPT
MNPT
BSPTM
BSPTF
IPS GROOVED
SANITARY
(ASME) Code. At small additional cost vessels can be Glycerin or suitable silicone based lubricants. Material of Construction
PET/Noryl
SS316L
Zeron 100
inspected during construction by an ASME Authorized
Inspector and ASME Code stamped. DO NOT…work on any component until first verifying that Non Serial Number End
pressure is relieved from vessel
Size of the Permeate Port
1”
1.25”
1.5”
DO NOT…make rigid piping connections to ports or clamp
The CodeLine 80S100 must be installed, operated and vessel in any way that resists growth of fiberglass shell Type of Connection
FNPT
MNPT
BSPTM
BSPTF
IPS GROOVED
SANITARY
maintained in accordance with the listed precautions and under pressure;
good industrial practice to assure safe operation over a ***∆DIA = 0.015 in. (0.4mm) and Material of Construction
PET/Noryl
SS316L
Zeron 100
long service life. ***∆L = 0.2 in. (6mm) for a length code –8 vessel Note:
DO NOT… hang piping manifolds from ports or use vessel in
The high performance Filament wound FRP shell must be • Standard offering is 1.0” FNPT in PET/Noryl.
any way to support other components
allowed to expand under pressure; undue restraint at • 1.25” & 1.5” BSPTF, 1.25” & 1.5” FNPT and 1.25” SANITARY connections cannot be offered
DO NOT…tighten Permeate Port connection more than one
support points or piping connections can cause leaks to • Sanitary permeate port cannot be offered in PET/Noryl
turn past hand tight
develop in the shell. This side-ported vessel requires
DO NOT… operate vessel without connecting both Permeate
special precautions in mounting and connection to piping STRAP ASSEMBLY
Ports internally to complete set of elements or otherwise
so that the vessel will not be subjected to excessive stress
plug ports internally so that external piping connection is
Standard SS304
Optional SS316
Optional SS316L
due to bending moments acting at the side openings in the
not subjected to feed pressure
fiberglass shell. The end closure, incorporating close FEED/CONCENTRATE PORT SELECTION
DO NOT…install Spacer on downstream end of vessel
fitting, interlocking metal components, must be kept dry
DO NOT…operate vessel without Thrust Cone installed Material of Construction
STD - Super Duplex SS (CD3MWCuN)
and free of corrosion; deterioration can lead to
downstream
Optional - CE3MN
catastrophic mechanical failure of the head.
DO NOT…pressurize vessel until double-checking to verify
Pentair Water will assist the purchaser in determining the that the Locking Ring is in place and fully seated. Configuration
Standard – CD3MWCuN 1D5D
suitability of this standard vessel for their specific DO NOT…operate vessel at pressure and temperature in
operating conditions. The final determination however, excess of its rating.
Optional –Multi port: (Refer SPEC.SHEET/PM/1.5”-3” for Multi ports selection).
including evaluation of the standard material of DO NOT…operate vessel with permeate pressure in excess of 1.5”, 2”, 2.5” Ports not available in 900 configurations.
construction for compatibility with the specific corrosive 125 psi at 150°F (0.86 Mpa at 66 0 C).
environment, shall be the responsibility of the purchaser.
PP
PP

DO NOT…tolerate leaks or allow end closures to be routinely Serial number end 
Alternate materials with enhanced corrosion resistance are wetted in any way PORT SIZE CODE
available on special order. DO NOT…operate outside the pH range 3-10. Opposite end  D 1½” GROOVED END
Specifications are subject to change without notice. BEARING PLATE MATERIAL E 2” GROOVED END
F 2½” GROOVED END

Standard – 6061 T6 Aluminium

Optional – Stainless Steel 316L
DWG. NO. 99163-J. © Pentair Water PAGE 2 OF 3.
Note: Please refer to 99329 for sanitary details and refer page-3 for optional Part numbers.
 BEARING PLATE PART NUMBERS SEALING PLATE PART NUMBERS
PERMEATE PORT SIZE ALUMINIUM SS316L
1.0"/1.25" 96158 96475 Standard used for Aluminium BP 96160
1.5" 96343 97370 Optional used for SS316L BP 96477

PERM PORT RETAINER RING & PORT NUT PART

STRAP ASSEMBLY PART NUMBERS
NUMBERS
1.0" / 1.25" Standard Port nut 45066 SS304 SS316 SS316L
1.5" Port Retainer Ring 45247 45042 46926 94371

F/C PORT & SEAL PART NUMBER

SIZE ***CD3MWCuN **CE3MN SEAL

1.5" 96469 97375 96077

2.0" 96645 97376 96078
2.5" 96385 97377 96079

PERMEATE PORT PART NUMBERS & PERMPORT TO F/C PORT OFFSET DISTANCE
FNPT MNPT BSPTF BSPTM IPS GROOVED
SIZE MATERIAL PART PART PART PART PART
NUMBER DIM "A" NUMBER DIM "A" NUMBER DIM "A" NUMBER DIM "A" NUMBER DIM "A"
PET/NORYL 96162 5.508 97316 6.508 96301 5.508 97354 6.508 97323 6.808
1.0" SS316L 96752 5.508 97347 6.508 97351 5.508 97355 6.508 97322 6.808
#
ZERON 100 97349 5.508 97348 6.508 97352 5.508 97356 6.508 97293 6.808
PET/NORYL NA NA 96345 6.508 NA NA 97360 6.508 97246 6.808
1.25" SS316L NA NA 96487 6.508 NA NA 97362 6.508 97311 6.808
#
ZERON 100 NA NA 97359 6.508 NA NA 97363 6.508 97365 6.808
PET/NORYL NA NA 97366 6.108 NA NA 97369 6.108 97469 6.738
1.5" SS316L NA NA 97368 6.108 NA NA 97371 6.108 97449 6.738
#
ZERON 100 NA NA 97292 6.108 NA NA 97372 6.108 97374 6.738

>ĞŶŶƚĞĐŚďǀ
ZŽƚƚĞƌĚĂŵƐĞǁĞŐϰϬϮŵ
ϮϲϮϵ,,ĞůĨƚ
dĞů͘нϯϭͲϭϱͲϮϲϭ͘Ϭϵ͘ϬϬ
&Ădž͘нϯϭͲϭϱͲϮϲϭ͘ϲϮ͘ϴϵ
www.lenntech.com
[email protected]