Scribd
Upload
139 views

1-0-0 Installation Fittings: Chapter 1 - Gas Generator

This document is an illustrated parts catalogue for an industrial gas generator. It contains 25 chapters that describe and provide figures of the various components of the gas generator. Each chapter covers a different system or assembly, such as the compressor casings and stators, compressor rotors and shafts, turbine wheels and shaft, and oil and air pipes and fittings. Figures are provided to illustrate the individual parts within each system.

Uploaded by

juana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views

1-0-0 Installation Fittings: Chapter 1 - Gas Generator

This document is an illustrated parts catalogue for an industrial gas generator. It contains 25 chapters that describe and provide figures of the various components of the gas generator. Each chapter covers a different system or assembly, such as the compressor casings and stators, compressor rotors and shafts, turbine wheels and shaft, and oil and air pipes and fittings. Figures are provided to illustrate the individual parts within each system.

Uploaded by

juana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

INDUSTRIAL AVON GAS GENERATOR

ILLUSTRATED PARTS CATALOGUE

TABLE OF CONTENTS

CHAPTER 1 - GAS GENERATOR

1-0-0 Installation Fittings

Fig 1 - Installation Fittings – Gas Generator Plant


Fig 2 - Installation Fittings
Fig 3 - Installation Fittings – Gas Generator Plant

1-1 Air Intake Extension and Flare

Fig 1 – Air Intake Extension and Flare


Fig 2 - Air Intake Extension and Flare

1-2 Air Intake and Front Bearing Housing

Fig 1 - Air Intake and Front Bearing Housing


Fig 2 - Air Intake and Front Bearing Housing

1-3 Compressor Bleed Valves

Fig 1 - Bleed Valve Assembly


Fig 2 - Bleed Valve Assembly

1-4 Compressor Casings and Stators

Fig 1 - Front and Intermediate Casing


Fig 2 - Air Cooling and Tapping Connections
Fig 3 - Retaining Rings and Stators
Fig 4 - Retaining Rings and Stators
Fig 5 - Compressor Stators
Fig 6 - Casing Assemblies - '00' Stage

1-5 Compressor Rotors and Shafts

Fig 1 - Front and Rear Rotor Shaft Assemblies


Fig 2 - Rotor Discs and Retaining Rings - Stages 6 to 14
Fig 3 - Rotor Spacers and Discs - Stages 4 and 5
Fig 4 - Rotor Discs and Spacers - Stages 00,0,1,2 and 3

1-6 Compressor Outlet Casing

Fig 1 -
Compressor Outlet Casing Connections
Fig 2 -
Oil Tubes and Rotor Seal Assemblies
Fig 3 -
Stator Blade Assemblies and Rings
Fig 4 –
Compressor Outlet Case Connections
(162G and 171G only)
Fig 5 – Oil Tubes and Rotor Seal Assemblies
(162G and 171G only)

CONTENTS

1535-GAS 1
May/00 Prelim 1
INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

1-7 Internal Wheelcase and Centre Bearing


Fig 1 - Front Casing - Heat Shield and Auxiliary Drive
Assemblies
Fig 2 - Internal Wheelcase and Centre Bearing

1-8 External Wheelcase, Sump and Filters


Fig 1 – External Wheelcase, Sump and Filters
Fig 2 – External Wheelcase, Sump and Filters
Fig 3 – External Wheelcase, Sump and Filters

1-9 Drive - External Wheelcase and Governor Pump


Fig 1 – External Wheelcase
Fig 2 – Governor Pump
Fig 3 – Speed Pick-Up Housing
Fig 4 – Electro-Magnetic Speed Pick-Up Drive

1-10 Oil Pumps


Fig 1 – Oil Pumps

1-11 Drive Starter


Fig 1 - Drive Assembly

1-12 Nozzle Box


Fig 1 - Front and Intermediate Casing Assembly
Fig 2 - Front Air Manifold and Casing Assembly
Fig 3 - Discharge Nozzle Assemblies

1-13 Rear Bearing Housing


Fig 1 – Rear Bearing Housing
Fig 2 - Labyrinth Seal and Excessive Rub Indicator
Fig 3 - Heat Shields and Front Seal Assemblies

1-14 Cooling Air Manifold (Rear Half)

Fig 1 - Cooling Air Manifold (Rear Half)

1-15 Turbine Wheels and Shaft


Fig 1 - Turbine Wheels and Shaft

1-16 Flame Tubes and Air Casing


Fig 1 - Flame Tubes and Air Casing

CONTENTS

1 1535-GAS
Prelim 2 May/00
INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

1-17 Exhaust Unit

Fig 1 - Exhaust Unit

1-18 Starter Fairing

Fig 1 - Starter Fairing

1-19 Not applicable to this Catalogue

1-20 Not applicable to this Catalogue

1-21 Intake Guide Vanes and Bleed Valves Control Unit

Fig 1 - Filter and Pressure Regulating Valve Assemblies


Fig 2 - Intake Guide Vanes Ram Assembly
Fig 3 - Operating Pin Assemblies
Fig 4 - Bleed Valves Control Unit Assembly

1-22 Front Suspension

Fig 1 - Front Suspension

1-23 Not applicable to this Catalogue

1-24 Air Pipes and Fittings

Fig 1 - Air Pipes and Fittings


Fig 2 - Air Pipes and Fittings
Fig 3 – Stage 3 Air Pipes and Fittings
Fig 4 – Centrifugal Breather Pipe and Fittings
Fig 5 – Air Pipes and Fittings

1-25 Oil Pipes and Fittings

Fig 1 - Oil Pipes and Fittings

CONTENTS

1535-GAS 1
May/00 Prelim 3

You might also like