Scribd
Upload
85 views2 pages

Positioner With Horisontal Rotation: Headstock H and Tailstock T

This document provides technical specifications for three positioners - the H-500, H-1000, and T-1000. It includes details on maximum capacity, motor power, speed, torque, fixture width, and part numbers for the headstock and tailstock for each model. The positioners allow for horizontal rotation of workpieces and require using the headstock and tailstock together.

Uploaded by

Mustafa Tas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views2 pages

Positioner With Horisontal Rotation: Headstock H and Tailstock T

This document provides technical specifications for three positioners - the H-500, H-1000, and T-1000. It includes details on maximum capacity, motor power, speed, torque, fixture width, and part numbers for the headstock and tailstock for each model. The positioners allow for horizontal rotation of workpieces and require using the headstock and tailstock together.

Uploaded by

Mustafa Tas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

H-500, H-1000, T-1000

Positioner with horisontal rotation


Headstock H and Tailstock T
One station positioner for workpieces requiring rotation about one axis. The free
standing headstock can be mounted directly on the floor at an appropriate distance
from the tailstock. The head- and tailstock with MotoMount fixture mounting system
must always be used together.

T-1000 H-500D H-1000D

Technical data H-500D H-1000D


Max. capacity load 500 kg 1000 kg
offset 191 mm 219 mm
Motor power 1.3 kW 3.0 kW
Gear ratio reducer 165:1 170:1
Speed nominal 9.0 rpm 8.8 rpm
maximum 23 rpm 23 rpm
Torque rated 1177 Nm 2689 Nm
continous rated 941 Nm 2151 Nm
peak 2354 Nm 5378 Nm
Rated welding current 100% 350 A 350 A
Standard 60% 460 A 460 A
Rated welding current 100% 860 A 860 A
Option 60% 1120 A 1120 A
35% 1380 A 1380 A
Max fixture width diameter 1300 mm 1700 mm 1300 mm 1700 mm
Headstock Part No. 141502-100 141502-101 141504-100 141504-101
Tailstock Part No. 141506-100 141506-101 141506-100 141506-101

Controlled by
DX200
H-500, H-1000

CW CW

+ +
D D

C
B

C
A

B
A
350 350

Type Part No. D A B C Type Part No. D A B C


141502-100 1300 642 715 827 141504-100 1300 642 715 857
H-500 H-1000
141502-101 1700 842 915 1027 141504-101 1700 842 915 1057

T-1000

D
642
715
723

Technical data may be subject to change without previous notice


© YASKAWA Nordic AB · 1070EN-00, 2016-09-27

350

Type Part No. D A B C


141506-100 1300 642 715 723

141506-101 1700 842 915 923 The head- and tailstock must always
T-1000
141507-100 1300 642 715 723 be used together.
141507-101 1700 842 915 923

YASKAWA Nordic AB
PO Box 504, SE-385 25 Torsås
SWEDEN
Phone +46 (0)480 417 800
www.motoman.eu

You might also like